Export limit exceeded: 325294 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (325294 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38053 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix null-ptr-deref in idpf_features_check idpf_features_check is used to validate the TX packet. skb header length is compared with the hardware supported value received from the device control plane. The value is stored in the adapter structure and to access it, vport pointer is used. During reset all the vports are released and the vport pointer that the netdev private structure points to is NULL. To avoid null-ptr-deref, store the max header length value in netdev private structure. This also helps to cache the value and avoid accessing adapter pointer in hot path. BUG: kernel NULL pointer dereference, address: 0000000000000068 ... RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x154/0x520 ? exc_page_fault+0x76/0x190 ? asm_exc_page_fault+0x26/0x30 ? idpf_features_check+0x6d/0xe0 [idpf] netif_skb_features+0x88/0x310 validate_xmit_skb+0x2a/0x2b0 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x19d/0x3a0 __dev_queue_xmit+0xb74/0xe70 ... | ||||
| CVE-2025-38055 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq Currently, using PEBS-via-PT with a sample frequency instead of a sample period, causes a segfault. For example: BUG: kernel NULL pointer dereference, address: 0000000000000195 <NMI> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0xca/0x290 ? exc_page_fault+0x7e/0x1b0 ? asm_exc_page_fault+0x26/0x30 ? intel_pmu_pebs_event_update_no_drain+0x40/0x60 ? intel_pmu_pebs_event_update_no_drain+0x32/0x60 intel_pmu_drain_pebs_icl+0x333/0x350 handle_pmi_common+0x272/0x3c0 intel_pmu_handle_irq+0x10a/0x2e0 perf_event_nmi_handler+0x2a/0x50 That happens because intel_pmu_pebs_event_update_no_drain() assumes all the pebs_enabled bits represent counter indexes, which is not always the case. In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes. The behaviour of PEBS-via-PT with sample frequency is questionable because although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not adjusted anyway. Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing the mask of counter bits instead of 'size'. Note, prior to the Fixes commit, 'size' would be limited to the maximum counter index, so the issue was not hit. | ||||
| CVE-2025-38059 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid csum tree [BUG] When trying read-only scrub on a btrfs with rescue=idatacsums mount option, it will crash with the following call trace: BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs] scrub_simple_mirror+0x175/0x290 [btrfs] scrub_stripe+0x5f7/0x6f0 [btrfs] scrub_chunk+0x9a/0x150 [btrfs] scrub_enumerate_chunks+0x333/0x660 [btrfs] btrfs_scrub_dev+0x23e/0x600 [btrfs] btrfs_ioctl+0x1dcf/0x2f80 [btrfs] __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e [CAUSE] Mount option "rescue=idatacsums" will completely skip loading the csum tree, so that any data read will not find any data csum thus we will ignore data checksum verification. Normally call sites utilizing csum tree will check the fs state flag NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all. This results in scrub to call btrfs_search_slot() on a NULL pointer and triggered above crash. [FIX] Check both extent and csum tree root before doing any tree search. | ||||
| CVE-2025-38060 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: copy_verifier_state() should copy 'loop_entry' field The bpf_verifier_state.loop_entry state should be copied by copy_verifier_state(). Otherwise, .loop_entry values from unrelated states would poison env->cur_state. Additionally, env->stack should not contain any states with .loop_entry != NULL. The states in env->stack are yet to be verified, while .loop_entry is set for states that reached an equivalent state. This means that env->cur_state->loop_entry should always be NULL after pop_stack(). See the selftest in the next commit for an example of the program that is not safe yet is accepted by verifier w/o this fix. This change has some verification performance impact for selftests: File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ---------------------------------- ---------------------------- --------- --------- -------------- ---------- ---------- ------------- arena_htab.bpf.o arena_htab_llvm 717 426 -291 (-40.59%) 57 37 -20 (-35.09%) arena_htab_asm.bpf.o arena_htab_asm 597 445 -152 (-25.46%) 47 37 -10 (-21.28%) arena_list.bpf.o arena_list_del 309 279 -30 (-9.71%) 23 14 -9 (-39.13%) iters.bpf.o iter_subprog_check_stacksafe 155 141 -14 (-9.03%) 15 14 -1 (-6.67%) iters.bpf.o iter_subprog_iters 1094 1003 -91 (-8.32%) 88 83 -5 (-5.68%) iters.bpf.o loop_state_deps2 479 725 +246 (+51.36%) 46 63 +17 (+36.96%) kmem_cache_iter.bpf.o open_coded_iter 63 59 -4 (-6.35%) 7 6 -1 (-14.29%) verifier_bits_iter.bpf.o max_words 92 84 -8 (-8.70%) 8 7 -1 (-12.50%) verifier_iterating_callbacks.bpf.o cond_break2 113 107 -6 (-5.31%) 12 12 +0 (+0.00%) And significant negative impact for sched_ext: File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ----------------- ---------------------- --------- --------- -------------------- ---------- ---------- ------------------ bpf.bpf.o lavd_init 7039 14723 +7684 (+109.16%) 490 1139 +649 (+132.45%) bpf.bpf.o layered_dispatch 11485 10548 -937 (-8.16%) 848 762 -86 (-10.14%) bpf.bpf.o layered_dump 7422 1000001 +992579 (+13373.47%) 681 31178 +30497 (+4478.27%) bpf.bpf.o layered_enqueue 16854 71127 +54273 (+322.02%) 1611 6450 +4839 (+300.37%) bpf.bpf.o p2dq_dispatch 665 791 +126 (+18.95%) 68 78 +10 (+14.71%) bpf.bpf.o p2dq_init 2343 2980 +637 (+27.19%) 201 237 +36 (+17.91%) bpf.bpf.o refresh_layer_cpumasks 16487 674760 +658273 (+3992.68%) 1770 65370 +63600 (+3593.22%) bpf.bpf.o rusty_select_cpu 1937 40872 +38935 (+2010.07%) 177 3210 +3033 (+1713.56%) scx_central.bpf.o central_dispatch 636 2687 +2051 (+322.48%) 63 227 +164 (+260.32%) scx_nest.bpf.o nest_init 636 815 +179 (+28.14%) 60 73 +13 (+21.67%) scx_qmap.bpf.o qmap_dispatch ---truncated--- | ||||
| CVE-2025-37956 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent rename with empty string Client can send empty newname string to ksmbd server. It will cause a kernel oops from d_alloc. This patch return the error when attempting to rename a file or directory with an empty new name string. | ||||
| CVE-2025-37957 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception Previously, commit ed129ec9057f ("KVM: x86: forcibly leave nested mode on vCPU reset") addressed an issue where a triple fault occurring in nested mode could lead to use-after-free scenarios. However, the commit did not handle the analogous situation for System Management Mode (SMM). This omission results in triggering a WARN when KVM forces a vCPU INIT after SHUTDOWN interception while the vCPU is in SMM. This situation was reprodused using Syzkaller by: 1) Creating a KVM VM and vCPU 2) Sending a KVM_SMI ioctl to explicitly enter SMM 3) Executing invalid instructions causing consecutive exceptions and eventually a triple fault The issue manifests as follows: WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112 kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Modules linked in: CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted 6.1.130-syzkaller-00157-g164fe5dde9b6 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Call Trace: <TASK> shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136 svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395 svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457 vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline] vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062 kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283 kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN() in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to do _something_ sane with the VMCB, since it's technically undefined, and INIT is the least awful choice given KVM's ABI. So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of SMM to avoid any weirdness (and the WARN). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. [sean: massage changelog, make it clear this isn't architectural behavior] | ||||
| CVE-2025-37960 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memblock: Accept allocated memory before use in memblock_double_array() When increasing the array size in memblock_double_array() and the slab is not yet available, a call to memblock_find_in_range() is used to reserve/allocate memory. However, the range returned may not have been accepted, which can result in a crash when booting an SNP guest: RIP: 0010:memcpy_orig+0x68/0x130 Code: ... RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006 RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000 RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00 RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000 R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78 R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00 memblock_double_array+0xff/0x310 memblock_add_range+0x1fb/0x2f0 memblock_reserve+0x4f/0xa0 memblock_alloc_range_nid+0xac/0x130 memblock_alloc_internal+0x53/0xc0 memblock_alloc_try_nid+0x3d/0xa0 swiotlb_init_remap+0x149/0x2f0 mem_init+0xb/0xb0 mm_core_init+0x8f/0x350 start_kernel+0x17e/0x5d0 x86_64_start_reservations+0x14/0x30 x86_64_start_kernel+0x92/0xa0 secondary_startup_64_no_verify+0x194/0x19b Mitigate this by calling accept_memory() on the memory range returned before the slab is available. Prior to v6.12, the accept_memory() interface used a 'start' and 'end' parameter instead of 'start' and 'size', therefore the accept_memory() call must be adjusted to specify 'start + size' for 'end' when applying to kernels prior to v6.12. | ||||
| CVE-2025-37973 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix out-of-bounds access during multi-link element defragmentation Currently during the multi-link element defragmentation process, the multi-link element length added to the total IEs length when calculating the length of remaining IEs after the multi-link element in cfg80211_defrag_mle(). This could lead to out-of-bounds access if the multi-link element or its corresponding fragment elements are the last elements in the IEs buffer. To address this issue, correctly calculate the remaining IEs length by deducting the multi-link element end offset from total IEs end offset. | ||||
| CVE-2025-37975 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: module: Fix out-of-bounds relocation access The current code allows rel[j] to access one element past the end of the relocation section. Simplify to num_relocations which is equivalent to the existing size expression. | ||||
| CVE-2025-37977 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set If dma-coherent property isn't set then descriptors are non-cacheable and the iocc shareability bits should be disabled. Without this UFS can end up in an incompatible configuration and suffer from random cache related stability issues. | ||||
| CVE-2025-37978 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: integrity: Do not call set_page_dirty_lock() Placing multiple protection information buffers inside the same page can lead to oopses because set_page_dirty_lock() can't be called from interrupt context. Since a protection information buffer is not backed by a file there is no point in setting its page dirty, there is nothing to synchronize. Drop the call to set_page_dirty_lock() and remove the last argument to bio_integrity_unpin_bvec(). | ||||
| CVE-2025-37980 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix resource leak in blk_register_queue() error path When registering a queue fails after blk_mq_sysfs_register() is successful but the function later encounters an error, we need to clean up the blk_mq_sysfs resources. Add the missing blk_mq_sysfs_unregister() call in the error path to properly clean up these resources and prevent a memory leak. | ||||
| CVE-2025-37984 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ecdsa - Harden against integer overflows in DIV_ROUND_UP() Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa implementation's ->key_size() callback returns an unusually large value. Herbert instead suggests (for a division by 8): X / 8 + !!(X & 7) Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and use it in lieu of DIV_ROUND_UP() for ->key_size() return values. Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes" parameter is a ->key_size() return value in some instances, or a user-specified ASN.1 length in the case of ecdsa_get_signature_rs(). | ||||
| CVE-2025-37986 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: class: Invalidate USB device pointers on partner unregistration To avoid using invalid USB device pointers after a Type-C partner disconnects, this patch clears the pointers upon partner unregistration. This ensures a clean state for future connections. | ||||
| CVE-2025-37987 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: Prevent possible adminq overflow/stuck condition The pds_core's adminq is protected by the adminq_lock, which prevents more than 1 command to be posted onto it at any one time. This makes it so the client drivers cannot simultaneously post adminq commands. However, the completions happen in a different context, which means multiple adminq commands can be posted sequentially and all waiting on completion. On the FW side, the backing adminq request queue is only 16 entries long and the retry mechanism and/or overflow/stuck prevention is lacking. This can cause the adminq to get stuck, so commands are no longer processed and completions are no longer sent by the FW. As an initial fix, prevent more than 16 outstanding adminq commands so there's no way to cause the adminq from getting stuck. This works because the backing adminq request queue will never have more than 16 pending adminq commands, so it will never overflow. This is done by reducing the adminq depth to 16. | ||||
| CVE-2025-37988 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount() Normally do_lock_mount(path, _) is locking a mountpoint pinned by *path and at the time when matching unlock_mount() unlocks that location it is still pinned by the same thing. Unfortunately, for 'beneath' case it's no longer that simple - the object being locked is not the one *path points to. It's the mountpoint of path->mnt. The thing is, without sufficient locking ->mnt_parent may change under us and none of the locks are held at that point. The rules are * mount_lock stabilizes m->mnt_parent for any mount m. * namespace_sem stabilizes m->mnt_parent, provided that m is mounted. * if either of the above holds and refcount of m is positive, we are guaranteed the same for refcount of m->mnt_parent. namespace_sem nests inside inode_lock(), so do_lock_mount() has to take inode_lock() before grabbing namespace_sem. It does recheck that path->mnt is still mounted in the same place after getting namespace_sem, and it does take care to pin the dentry. It is needed, since otherwise we might end up with racing mount --move (or umount) happening while we were getting locks; in that case dentry would no longer be a mountpoint and could've been evicted on memory pressure along with its inode - not something you want when grabbing lock on that inode. However, pinning a dentry is not enough - the matching mount is also pinned only by the fact that path->mnt is mounted on top it and at that point we are not holding any locks whatsoever, so the same kind of races could end up with all references to that mount gone just as we are about to enter inode_lock(). If that happens, we are left with filesystem being shut down while we are holding a dentry reference on it; results are not pretty. What we need to do is grab both dentry and mount at the same time; that makes inode_lock() safe *and* avoids the problem with fs getting shut down under us. After taking namespace_sem we verify that path->mnt is still mounted (which stabilizes its ->mnt_parent) and check that it's still mounted at the same place. From that point on to the matching namespace_unlock() we are guaranteed that mount/dentry pair we'd grabbed are also pinned by being the mountpoint of path->mnt, so we can quietly drop both the dentry reference (as the current code does) and mnt one - it's OK to do under namespace_sem, since we are not dropping the final refs. That solves the problem on do_lock_mount() side; unlock_mount() also has one, since dentry is guaranteed to stay pinned only until the namespace_unlock(). That's easy to fix - just have inode_unlock() done earlier, while it's still pinned by mp->m_dentry. | ||||
| CVE-2025-37993 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probe The spin lock tx_handling_spinlock in struct m_can_classdev is not being initialized. This leads the following spinlock bad magic complaint from the kernel, eg. when trying to send CAN frames with cansend from can-utils: | BUG: spinlock bad magic on CPU#0, cansend/95 | lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 | CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE | Hardware name: MachineWare SIM-V (DT) | Call Trace: | [<ffffffff800133e0>] dump_backtrace+0x1c/0x24 | [<ffffffff800022f2>] show_stack+0x28/0x34 | [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68 | [<ffffffff8000de70>] dump_stack+0x14/0x1c | [<ffffffff80003134>] spin_dump+0x62/0x6e | [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142 | [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c | [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a | [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee | [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292 | [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8 | [<ffffffff8073b8fa>] can_send+0xc6/0x242 | [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c | [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee | [<ffffffff801d06ea>] vfs_write+0x184/0x3a6 | [<ffffffff801d0a88>] ksys_write+0xa0/0xc0 | [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c | [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212 | [<ffffffff807a830a>] handle_exception+0x146/0x152 Initializing the spin lock in m_can_class_allocate_dev solves that problem. | ||||
| CVE-2025-37996 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort() Commit fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the initialization of the local memcache variable in user_mem_abort() conditional, leaving a codepath where it is used uninitialized via kvm_pgtable_stage2_map(). This can fail on any path that requires a stage-2 allocation without transition via a permission fault or dirty logging. Fix this by making sure that memcache is always valid. | ||||
| CVE-2022-50006 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.2 fix problems with __nfs42_ssc_open A destination server while doing a COPY shouldn't accept using the passed in filehandle if its not a regular filehandle. If alloc_file_pseudo() has failed, we need to decrement a reference on the newly created inode, otherwise it leaks. | ||||
| CVE-2025-61795 | 1 Apache | 1 Tomcat | 2025-11-14 | 5.3 Medium |
| Improper Resource Shutdown or Release vulnerability in Apache Tomcat. If an error occurred (including exceeding limits) during the processing of a multipart upload, temporary copies of the uploaded parts written to disc were not cleaned up immediately but left for the garbage collection process to delete. Depending on JVM settings, application memory usage and application load, it was possible that space for the temporary copies of uploaded parts would be filled faster than GC cleared it, leading to a DoS. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.11, from 10.1.0-M1 through 10.1.46, from 9.0.0.M1 through 9.0.109. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.12 or later, 10.1.47 or later or 9.0.110 or later which fixes the issue. | ||||