Export limit exceeded: 324770 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (324770 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50023 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-axi-dmac: ignore interrupt if no descriptor If the channel has no descriptor and the interrupt is raised then the kernel will OOPS. Check the result of vchan_next_desc() in the handler axi_chan_block_xfer_complete() to avoid the error happening. | ||||
| CVE-2022-50011 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: venus: pm_helpers: Fix warning in OPP during probe Fix the following WARN triggered during Venus driver probe on 5.19.0-rc8-next-20220728: WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+) videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_bus qcom_stats drm_display_helper qcom_pil_info soundwire_bus snd_soc_lpass_va_macro mc qcom_q6v5 phy_qcom_snps_femto_v2 qcom_rng snd_soc_lpass_macro_common snd_soc_lpass_wsa_macro lpass_gfm_sm8250 slimbus qcom_sysmon qcom_common qcom_glink_smem qmi_helpers qcom_wdt mdt_loader socinfo icc_osm_l3 display_connector drm_kms_helper qnoc_sm8250 drm fuse ip_tables x_tables ipv6 CPU: 7 PID: 339 Comm: systemd-udevd Not tainted 5.19.0-rc8-next-20220728 #4 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dev_pm_opp_set_config+0x49c/0x610 lr : dev_pm_opp_set_config+0x58/0x610 sp : ffff8000093c3710 x29: ffff8000093c3710 x28: ffffbca3959d82b8 x27: ffff8000093c3d00 x26: ffffbca3959d8e08 x25: ffff4396cac98118 x24: ffff4396c0e24810 x23: ffff4396c4272c40 x22: ffff4396c0e24810 x21: ffff8000093c3810 x20: ffff4396cac36800 x19: ffff4396cac96800 x18: 0000000000000000 x17: 0000000000000003 x16: ffffbca3f4edf198 x15: 0000001cba64a858 x14: 0000000000000180 x13: 000000000000017e x12: 0000000000000000 x11: 0000000000000002 x10: 0000000000000a60 x9 : ffff8000093c35c0 x8 : ffff4396c4273700 x7 : ffff43983efca6c0 x6 : ffff43983efca640 x5 : 00000000410fd0d0 x4 : ffff4396c4272c40 x3 : ffffbca3f5d1e008 x2 : 0000000000000000 x1 : ffff4396c2421600 x0 : ffff4396cac96860 Call trace: dev_pm_opp_set_config+0x49c/0x610 devm_pm_opp_set_config+0x18/0x70 vcodec_domains_get+0xb8/0x1638 [venus_core] core_get_v4+0x1d8/0x218 [venus_core] venus_probe+0xf4/0x468 [venus_core] platform_probe+0x68/0xd8 really_probe+0xbc/0x2a8 __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0xf0 __driver_attach+0x70/0x120 bus_for_each_dev+0x70/0xc0 driver_attach+0x24/0x30 bus_add_driver+0x150/0x200 driver_register+0x64/0x120 __platform_driver_register+0x28/0x38 qcom_venus_driver_init+0x24/0x1000 [venus_core] do_one_initcall+0x54/0x1c8 do_init_module+0x44/0x1d0 load_module+0x16c8/0x1aa0 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x44/0x108 el0_svc_common.constprop.0+0xcc/0xf0 do_el0_svc+0x2c/0xb8 el0_svc+0x2c/0x88 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x18c/0x190 qcom-venus: probe of aa00000.video-codec failed with error -16 The fix is re-ordering the code related to OPP core. The OPP core expects all configuration options to be provided before the OPP table is added. | ||||
| CVE-2022-49975 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't redirect packets with invalid pkt_len Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any skbs, that is, the flow->head is null. The root cause, as the [2] says, is because that bpf_prog_test_run_skb() run a bpf prog which redirects empty skbs. So we should determine whether the length of the packet modified by bpf prog or others like bpf_prog_test is valid before forwarding it directly. | ||||
| CVE-2022-49938 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix small mempool leak in SMB2_negotiate() In some cases of failure (dialect mismatches) in SMB2_negotiate(), after the request is sent, the checks would return -EIO when they should be rather setting rc = -EIO and jumping to neg_exit to free the response buffer from mempool. | ||||
| CVE-2022-49932 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). E.g. KVM will encounter a NULL pointer when attempting to add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to create a VM before vmx_init() configures said list. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel] <TASK> vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 [kvm] vcpu_load+0x2f/0x40 [kvm] kvm_arch_vcpu_create+0x231/0x310 [kvm] kvm_vm_ioctl+0x79f/0xe10 [kvm] ? handle_mm_fault+0xb1/0x220 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f5a6b05743b </TASK> Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass | ||||
| CVE-2022-49880 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix warning in 'ext4_da_release_space' Syzkaller report issue as follows: EXT4-fs (loop0): Free/Dirty block details EXT4-fs (loop0): free_blocks=0 EXT4-fs (loop0): dirty_blocks=0 EXT4-fs (loop0): Block reservation details EXT4-fs (loop0): i_reserved_data_blocks=0 EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks ------------[ cut here ]------------ WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524 Modules linked in: CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: writeback wb_workfn (flush-7:0) RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528 RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296 RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00 RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000 RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5 R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000 R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461 mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589 ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852 do_writepages+0x3c3/0x680 mm/page-writeback.c:2469 __writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870 wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Above issue may happens as follows: ext4_da_write_begin ext4_create_inline_data ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); __ext4_ioctl ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag ext4_da_write_begin ext4_da_convert_inline_data_to_extent ext4_da_write_inline_data_begin ext4_da_map_blocks ext4_insert_delayed_block if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk)) ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1 allocated = true; ext4_es_insert_delayed_block(inode, lblk, allocated); ext4_writepages mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1 ext4_es_remove_extent ext4_da_release_space(inode, reserved); if (unlikely(to_free > ei->i_reserved_data_blocks)) -> to_free == 1 but ei->i_reserved_data_blocks == 0 -> then trigger warning as above To solve above issue, forbid inode do migrate which has inline data. | ||||
| CVE-2022-49879 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix BUG_ON() when directory entry has invalid rec_len The rec_len field in the directory entry has to be a multiple of 4. A corrupted filesystem image can be used to hit a BUG() in ext4_rec_len_to_disk(), called from make_indexed_dir(). ------------[ cut here ]------------ kernel BUG at fs/ext4/ext4.h:2413! ... RIP: 0010:make_indexed_dir+0x53f/0x5f0 ... Call Trace: <TASK> ? add_dirent_to_buf+0x1b2/0x200 ext4_add_entry+0x36e/0x480 ext4_add_nondir+0x2b/0xc0 ext4_create+0x163/0x200 path_openat+0x635/0xe90 do_filp_open+0xb4/0x160 ? __create_object.isra.0+0x1de/0x3b0 ? _raw_spin_unlock+0x12/0x30 do_sys_openat2+0x91/0x150 __x64_sys_open+0x6c/0xa0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The fix simply adds a call to ext4_check_dir_entry() to validate the directory entry, returning -EFSCORRUPTED if the entry is invalid. | ||||
| CVE-2022-49835 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix potential memleak in 'add_widget_node' As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources. | ||||
| CVE-2022-49834 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of ns_writer on remount If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time. In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below: Task1 Task2 -------------------------------- ------------------------------ nilfs_construct_segment nilfs_segctor_sync init_wait init_waitqueue_entry add_wait_queue schedule nilfs_remount (R/W remount case) nilfs_attach_log_writer nilfs_detach_log_writer nilfs_segctor_destroy kfree finish_wait _raw_spin_lock_irqsave __raw_spin_lock_irqsave do_raw_spin_lock debug_spin_lock_before <-- use-after-free While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1]. This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only. | ||||
| CVE-2022-49831 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: initialize device's zone info for seeding When performing seeding on a zoned filesystem it is necessary to initialize each zoned device's btrfs_zoned_device_info structure, otherwise mounting the filesystem will cause a NULL pointer dereference. This was uncovered by fstests' testcase btrfs/163. | ||||
| CVE-2022-49828 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: don't delete error page from pagecache This change is very similar to the change that was made for shmem [1], and it solves the same problem but for HugeTLBFS instead. Currently, when poison is found in a HugeTLB page, the page is removed from the page cache. That means that attempting to map or read that hugepage in the future will result in a new hugepage being allocated instead of notifying the user that the page was poisoned. As [1] states, this is effectively memory corruption. The fix is to leave the page in the page cache. If the user attempts to use a poisoned HugeTLB page with a syscall, the syscall will fail with EIO, the same error code that shmem uses. For attempts to map the page, the thread will get a BUS_MCEERR_AR SIGBUS. [1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens") | ||||
| CVE-2022-49771 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm ioctl: fix misbehavior if list_versions races with module loading __list_versions will first estimate the required space using the "dm_target_iterate(list_version_get_needed, &needed)" call and then will fill the space using the "dm_target_iterate(list_version_get_info, &iter_info)" call. Each of these calls locks the targets using the "down_read(&_lock)" and "up_read(&_lock)" calls, however between the first and second "dm_target_iterate" there is no lock held and the target modules can be loaded at this point, so the second "dm_target_iterate" call may need more space than what was the first "dm_target_iterate" returned. The code tries to handle this overflow (see the beginning of list_version_get_info), however this handling is incorrect. The code sets "param->data_size = param->data_start + needed" and "iter_info.end = (char *)vers+len" - "needed" is the size returned by the first dm_target_iterate call; "len" is the size of the buffer allocated by userspace. "len" may be greater than "needed"; in this case, the code will write up to "len" bytes into the buffer, however param->data_size is set to "needed", so it may write data past the param->data_size value. The ioctl interface copies only up to param->data_size into userspace, thus part of the result will be truncated. Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this guarantees that the second "dm_target_iterate" call will write only up to the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it overflows the "needed" space - in this case, userspace will allocate a larger buffer and retry. Note that there is also a bug in list_version_get_needed - we need to add "strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)". | ||||
| CVE-2022-49769 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Check sb_bsize_shift after reading superblock Fuzzers like to scribble over sb_bsize_shift but in reality it's very unlikely that this field would be corrupted on its own. Nevertheless it should be checked to avoid the possibility of messy mount errors due to bad calculations. It's always a fixed value based on the block size so we can just check that it's the expected value. Tested with: mkfs.gfs2 -O -p lock_nolock /dev/vdb for i in 0 -1 64 65 32 33; do gfs2_edit -p sb field sb_bsize_shift $i /dev/vdb mount /dev/vdb /mnt/test && umount /mnt/test done Before this patch we get a withdraw after [ 76.413681] gfs2: fsid=loop0.0: fatal: invalid metadata block [ 76.413681] bh = 19 (type: exp=5, found=4) [ 76.413681] function = gfs2_meta_buffer, file = fs/gfs2/meta_io.c, line = 492 and with UBSAN configured we also get complaints like [ 76.373395] UBSAN: shift-out-of-bounds in fs/gfs2/ops_fstype.c:295:19 [ 76.373815] shift exponent 4294967287 is too large for 64-bit type 'long unsigned int' After the patch, these complaints don't appear, mount fails immediately and we get an explanation in dmesg. | ||||
| CVE-2022-49767 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: always use O_NONBLOCK read/write syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop() from p9_conn_destroy() from p9_fd_close() is failing to interrupt already started kernel_read() from p9_fd_read() from p9_read_work() and/or kernel_write() from p9_fd_write() from p9_write_work() requests. Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open() does not set O_NONBLOCK flag, but pipe blocks unless signal is pending, p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when the file descriptor refers to a pipe. In other words, pipe file descriptor needs to be handled as if socket file descriptor. We somehow need to interrupt kernel_read()/kernel_write() on pipes. A minimal change, which this patch is doing, is to set O_NONBLOCK flag from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing of regular files. But this approach changes O_NONBLOCK flag on userspace- supplied file descriptors (which might break userspace programs), and O_NONBLOCK flag could be changed by userspace. It would be possible to set O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still remains small race window for clearing O_NONBLOCK flag. If we don't want to manipulate O_NONBLOCK flag, we might be able to surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING) and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are processed by kernel threads which process global system_wq workqueue, signals could not be delivered from remote threads when p9_mux_poll_stop() from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be needed if we count on signals for making kernel_read()/kernel_write() non-blocking. [Dominique: add comment at Christian's suggestion] | ||||
| CVE-2022-49766 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netlink: Bounds-check struct nlmsgerr creation In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(), switch from __nlmsg_put to nlmsg_put(), and explain the bounds check for dealing with the memcpy() across a composite flexible array struct. Avoids this future run-time warning: memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16) | ||||
| CVE-2022-49765 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p: use a dedicated spinlock for trans_fd Shamelessly copying the explanation from Tetsuo Handa's suggested patch[1] (slightly reworded): syzbot is reporting inconsistent lock state in p9_req_put()[2], for p9_tag_remove() from p9_req_put() from IRQ context is using spin_lock_irqsave() on "struct p9_client"->lock but trans_fd (not from IRQ context) is using spin_lock(). Since the locks actually protect different things in client.c and in trans_fd.c, just replace trans_fd.c's lock by a new one specific to the transport (client.c's protect the idr for fid/tag allocations, while trans_fd.c's protects its own req list and request status field that acts as the transport's state machine) | ||||
| CVE-2022-49764 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent bpf program recursion for raw tracepoint probes We got report from sysbot [1] about warnings that were caused by bpf program attached to contention_begin raw tracepoint triggering the same tracepoint by using bpf_trace_printk helper that takes trace_printk_lock lock. Call Trace: <TASK> ? trace_event_raw_event_bpf_trace_printk+0x5f/0x90 bpf_trace_printk+0x2b/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 __unfreeze_partials+0x5b/0x160 ... The can be reproduced by attaching bpf program as raw tracepoint on contention_begin tracepoint. The bpf prog calls bpf_trace_printk helper. Then by running perf bench the spin lock code is forced to take slow path and call contention_begin tracepoint. Fixing this by skipping execution of the bpf program if it's already running, Using bpf prog 'active' field, which is being currently used by trampoline programs for the same reason. Moving bpf_prog_inc_misses_counter to syscall.c because trampoline.c is compiled in just for CONFIG_BPF_JIT option. [1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t | ||||
| CVE-2022-49763 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix use-after-free in ntfs_attr_find() Patch series "ntfs: fix bugs about Attribute", v2. This patchset fixes three bugs relative to Attribute in record: Patch 1 adds a sanity check to ensure that, attrs_offset field in first mft record loading from disk is within bounds. Patch 2 moves the ATTR_RECORD's bounds checking earlier, to avoid dereferencing ATTR_RECORD before checking this ATTR_RECORD is within bounds. Patch 3 adds an overflow checking to avoid possible forever loop in ntfs_attr_find(). Without patch 1 and patch 2, the kernel triggersa KASAN use-after-free detection as reported by Syzkaller. Although one of patch 1 or patch 2 can fix this, we still need both of them. Because patch 1 fixes the root cause, and patch 2 not only fixes the direct cause, but also fixes the potential out-of-bounds bug. This patch (of 3): Syzkaller reported use-after-free read as follows: ================================================================== BUG: KASAN: use-after-free in ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597 Read of size 2 at addr ffff88807e352009 by task syz-executor153/3607 [...] Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 ntfs_attr_find+0xc02/0xce0 fs/ntfs/attrib.c:597 ntfs_attr_lookup+0x1056/0x2070 fs/ntfs/attrib.c:1193 ntfs_read_inode_mount+0x89a/0x2580 fs/ntfs/inode.c:1845 ntfs_fill_super+0x1799/0x9320 fs/ntfs/super.c:2854 mount_bdev+0x34d/0x410 fs/super.c:1400 legacy_get_tree+0x105/0x220 fs/fs_context.c:610 vfs_get_tree+0x89/0x2f0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x1326/0x1e20 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> The buggy address belongs to the physical page: page:ffffea0001f8d400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7e350 head:ffffea0001f8d400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888011842140 raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88807e351f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88807e351f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88807e352000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807e352080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807e352100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Kernel will loads $MFT/$DATA's first mft record in ntfs_read_inode_mount(). Yet the problem is that after loading, kernel doesn't check whether attrs_offset field is a valid value. To be more specific, if attrs_offset field is larger than bytes_allocated field, then it may trigger the out-of-bounds read bug(reported as use-after-free bug) in ntfs_attr_find(), when kernel tries to access the corresponding mft record's attribute. This patch solves it by adding the sanity check between attrs_offset field and bytes_allocated field, after loading the first mft record. | ||||
| CVE-2022-49762 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: check overflow when iterating ATTR_RECORDs Kernel iterates over ATTR_RECORDs in mft record in ntfs_attr_find(). Because the ATTR_RECORDs are next to each other, kernel can get the next ATTR_RECORD from end address of current ATTR_RECORD, through current ATTR_RECORD length field. The problem is that during iteration, when kernel calculates the end address of current ATTR_RECORD, kernel may trigger an integer overflow bug in executing `a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))`. This may wrap, leading to a forever iteration on 32bit systems. This patch solves it by adding some checks on calculating end address of current ATTR_RECORD during iteration. | ||||
| CVE-2022-49312 | 1 Linux | 1 Linux Kernel | 2025-12-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix a potential memory leak in r871xu_drv_init() In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not properly released as there is no action will be performed by r8712_usb_dvobj_deinit(). To properly release it, we should call r8712_free_io_queue() in r8712_usb_dvobj_deinit(). Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called by r871x_dev_unload() under condition `padapter->bup` and r8712_free_io_queue() is called by r8712_free_drv_sw(). However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for better understading the code. So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove r8712_free_io_queue() from r8712_free_drv_sw(). | ||||