Export limit exceeded: 334497 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (334497 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23274 | 1 Linux | 1 Linux Kernel | 2026-03-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type. | ||||
| CVE-2026-23275 | 1 Linux | 1 Linux Kernel | 2026-03-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper. | ||||
| CVE-2026-23276 | 1 Linux | 1 Linux Kernel | 2026-03-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add xmit recursion limit to tunnel xmit functions Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own recursion limit. When a bond device in broadcast mode has GRE tap interfaces as slaves, and those GRE tunnels route back through the bond, multicast/broadcast traffic triggers infinite recursion between bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing kernel stack overflow. The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not sufficient because tunnel recursion involves route lookups and full IP output, consuming much more stack per level. Use a lower limit of 4 (IP_TUNNEL_RECURSION_LIMIT) to prevent overflow. Add recursion detection using dev_xmit_recursion helpers directly in iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.). Move dev_xmit_recursion helpers from net/core/dev.h to public header include/linux/netdevice.h so they can be used by tunnel code. BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160 Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11 Workqueue: mld mld_ifc_work Call Trace: <TASK> __build_flow_key.constprop.0 (net/ipv4/route.c:515) ip_rt_update_pmtu (net/ipv4/route.c:1073) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) mld_sendpack mld_ifc_work process_one_work worker_thread </TASK> | ||||
| CVE-2026-23277 | 1 Linux | 1 Linux Kernel | 2026-03-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit through slave devices, but does not update skb->dev to the slave device beforehand. When a gretap tunnel is a TEQL slave, the transmit path reaches iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0 master) and later calls iptunnel_xmit_stats(dev, pkt_len). This function does: get_cpu_ptr(dev->tstats) Since teql_master_setup() does not set dev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes NULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: <TASK> ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206) Fix this by setting skb->dev = slave before calling netdev_start_xmit(), so that tunnel xmit functions see the correct slave device with properly allocated tstats. | ||||
| CVE-2026-23278 | 1 Linux | 1 Linux Kernel | 2026-03-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always walk all pending catchall elements During transaction processing we might have more than one catchall element: 1 live catchall element and 1 pending element that is coming as part of the new batch. If the map holding the catchall elements is also going away, its required to toggle all catchall elements and not just the first viable candidate. Otherwise, we get: WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404 RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables] [..] __nft_set_elem_destroy+0x106/0x380 [nf_tables] nf_tables_abort_release+0x348/0x8d0 [nf_tables] nf_tables_abort+0xcf2/0x3ac0 [nf_tables] nfnetlink_rcv_batch+0x9c9/0x20e0 [..] | ||||
| CVE-2026-33130 | 2026-03-20 | 6.5 Medium | ||
| Uptime Kuma is an open source, self-hosted monitoring tool. In versions 1.23.0 through 2.2.0, the fix from GHSA-vffh-c9pq-4crh doesn't fully work to preventServer-side Template Injection (SSTI). The three mitigations added to the Liquid engine (root, relativeReference, dynamicPartials) only block quoted paths. If a project uses an unquoted absolute path, attackers can still read any file on the server. The original fix in notification-provider.js only constrains the first two steps of LiquidJS's file resolution (via root, relativeReference, and dynamicPartials options), but the third step, the require.resolve() fallback in liquid.node.js has no containment check, allowing unquoted absolute paths like /etc/passwd to resolve successfully. Quoted paths happen to be blocked only because the literal quote characters cause require.resolve('"/etc/passwd"') to throw a MODULE_NOT_FOUND error, not because of any intentional security measure. This issue has been fixed in version 2.2.1. | ||||
| CVE-2026-32305 | 2026-03-20 | N/A | ||
| Traefik is an HTTP reverse proxy and load balancer. Versions 2.11.40 and below, 3.0.0-beta1 through 3.6.11, and 3.7.0-ea.1 are vulnerable to mTLS bypass through the TLS SNI pre-sniffing logic related to fragmented ClientHello packets. When a TLS ClientHello is fragmented across multiple records, Traefik's SNI extraction may fail with an EOF and return an empty SNI. The TCP router then falls back to the default TLS configuration, which does not require client certificates by default. This allows an attacker to bypass route-level mTLS enforcement and access services that should require mutual TLS authentication. This issue is patched in versions 2.11.41, 3.6.11 and 3.7.0-ea.2. | ||||
| CVE-2026-4136 | 2 Stellarwp, Wordpress | 2 Membership Plugin - Restrict Content, Wordpress | 2026-03-20 | 4.3 Medium |
| The Membership Plugin – Restrict Content plugin for WordPress is vulnerable to Unvalidated Redirect in all versions up to, and including, 3.2.24. This is due to insufficient validation on the redirect url supplied via the 'rcp_redirect' parameter. This makes it possible for unauthenticated attackers to redirect users with the password reset email to potentially malicious sites if they can successfully trick them into performing an action. | ||||
| CVE-2024-32537 | 2026-03-20 | 7.1 High | ||
| Cross-Site request forgery (CSRF) vulnerability in joshuae1974 Flash Video Player allows Cross Site Request Forgery.This issue affects Flash Video Player: from n/a through 5.0.4. | ||||
| CVE-2026-31813 | 1 Supabase | 1 Auth | 2026-03-20 | 4.8 Medium |
| Supabase Auth is a JWT based API for managing users and issuing JWT tokens. Prior to 2.185.0, a vulnerability has been identified that allows an attacker to issue sessions for arbitrary users using specially crafted ID tokens when the Apple or Azure providers are enabled. The attacker issues a valid, asymmetrically signed ID token from their issuer for each victim email address, which then is sent to the Supabase Auth token endpoint using the ID token flow. If the ID token is OIDC compliant, the Auth server would validate it against the attacker-controlled issuer and link the existing OIDC identity (Apple or Azure) of the victim to an additional OIDC identity based on the ID token contents. The Auth server would then issue a valid user session (access and refresh tokens) at the AAL1 level to the attacker. This vulnerability is fixed in 2.185.0. | ||||
| CVE-2026-22324 | 2026-03-20 | 8.1 High | ||
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in ThemeREX Melania allows PHP Local File Inclusion.This issue affects Melania: from n/a through 2.5.0. | ||||
| CVE-2025-57543 | 1 Netbox | 1 Netbox | 2026-03-20 | 6.1 Medium |
| Cross Site scripting vulnerability (XSS) in NetBox 4.3.5 "comment" field on object forms. An attacker can inject arbitrary HTML, which will be rendered in the web UI when viewed by other users. This could potentially lead to user interface redress attacks or be escalated to XSS in certain contexts. | ||||
| CVE-2025-69783 | 2 Comodosecurity, Xcitium | 2 Openedr, Openedr | 2026-03-20 | 7.8 High |
| A local attacker can bypass OpenEDR's 2.5.1.0 self-defense mechanism by renaming a malicious executable to match a trusted process name (e.g., csrss.exe, edrsvc.exe, edrcon.exe). This allows unauthorized interaction with the OpenEDR kernel driver, granting access to privileged functionality such as configuration changes, process monitoring, and IOCTL communication that should be restricted to trusted components. While this issue alone does not directly grant SYSTEM privileges, it breaks OpenEDR's trust model and enables further exploitation leading to full local privilege escalation. | ||||
| CVE-2026-20989 | 2 Samsung, Samsung Mobile | 2 Android, Samsung Mobile Devices | 2026-03-20 | 2.4 Low |
| Improper verification of cryptographic signature in Font Settings prior to SMR Mar-2026 Release 1 allows physical attackers to use custom font. | ||||
| CVE-2026-33025 | 1 Wwbn | 1 Avideo-encoder | 2026-03-20 | N/A |
| AVideo is a video-sharing Platform. Versions prior to 8.0 contain a SQL Injection vulnerability in the getSqlFromPost() method of Object.php. The $_POST['sort'] array keys are used directly as SQL column identifiers inside an ORDER BY clause. Although real_escape_string() was applied, it only escapes string-context characters (quotes, null bytes) and provides no protection for SQL identifiers — making it entirely ineffective here. This issue has been fixed in version 8.0. To workaround this issue without upgrading, operators can apply a WAF rule to block POST requests where any sort[*] key contains characters outside [A-Za-z0-9_]. Alternatively, restrict access to the queue view (queue.json.php, index.php) to trusted IP ranges only. | ||||
| CVE-2025-69784 | 2 Comodosecurity, Xcitium | 2 Openedr, Openedr | 2026-03-20 | 8.8 High |
| A local, non-privileged attacker can abuse a vulnerable IOCTL interface exposed by the OpenEDR 2.5.1.0 kernel driver to modify the DLL injection path used by the product. By redirecting this path to a user-writable location, an attacker can cause OpenEDR to load an attacker-controlled DLL into high-privilege processes. This results in arbitrary code execution with SYSTEM privileges, leading to full compromise of the affected system. | ||||
| CVE-2026-33068 | 2026-03-20 | N/A | ||
| Claude Code is an agentic coding tool. Versions prior to 2.1.53 resolved the permission mode from settings files, including the repo-controlled .claude/settings.json, before determining whether to display the workspace trust confirmation dialog. A malicious repository could set permissions.defaultMode to bypassPermissions in its committed .claude/settings.json, causing the trust dialog to be silently skipped on first open. This allowed a user to be placed into a permissive mode without seeing the trust confirmation prompt, making it easier for an attacker-controlled repository to gain tool execution without explicit user consent. This issue has been patched in version 2.1.53. | ||||
| CVE-2026-20990 | 2 Samsung, Samsung Mobile | 2 Android, Samsung Mobile Devices | 2026-03-20 | 8.1 High |
| Improper export of android application components in Secure Folder prior to SMR Mar-2026 Release 1 allows local attackers to launch arbitrary activity with Secure Folder privilege. | ||||
| CVE-2026-33075 | 1 Labring | 1 Fastgpt | 2026-03-20 | N/A |
| FastGPT is an AI Agent building platform. In versions 4.14.8.3 and below, the fastgpt-preview-image.yml workflow is vulnerable to arbitrary code execution and secret exfiltration by any external contributor. It uses pull_request_target (which runs with access to repository secrets) but checks out code from the pull request author's fork, then builds and pushes Docker images using attacker-controlled Dockerfiles. This also enables a supply chain attack via the production container registry. A patch was not available at the time of publication. | ||||
| CVE-2026-33124 | 2026-03-20 | N/A | ||
| Frigate is a network video recorder (NVR) with realtime local object detection for IP cameras. Versions prior to 0.17.0-beta1 allow any authenticated user to change their own password without verifying the current password through the /users/{username}/password endpoint. Changing a password does not invalidate existing JWT tokens, and there is no validation of password strength. If an attacker obtains a valid session token (e.g., via accidentally exposed JWT, stolen cookie, XSS, compromised device, or sniffing over HTTP), they can change the victim’s password and gain permanent control of the account. Since password changes do not invalidate existing JWT tokens, session hijacks persist even after a password reset. Additionally, the lack of password strength validation exposes accounts to brute-force attacks. This issue has been resolved in version 0.17.0-beta1. | ||||