Export limit exceeded: 326156 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 326156 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (326156 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-15157 | 2 Starfishwp, Wordpress | 2 Starfish Review Generation & Marketing For Wordpress, Wordpress | 2026-02-18 | 8.8 High |
| The Starfish Review Generation & Marketing for WordPress plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the 'srm_restore_options_defaults' function in all versions up to, and including, 3.1.19. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site. | ||||
| CVE-2026-23171 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix use-after-free due to enslave fail after slave array update Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] <TASK> [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] | ||||
| CVE-2026-23167 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix race between rfkill and nci_unregister_device(). syzbot reported the splat below [0] without a repro. It indicates that struct nci_dev.cmd_wq had been destroyed before nci_close_device() was called via rfkill. nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which (I think) was called from virtual_ncidev_close() when syzbot close()d an fd of virtual_ncidev. The problem is that nci_unregister_device() destroys nci_dev.cmd_wq first and then calls nfc_unregister_device(), which removes the device from rfkill by rfkill_unregister(). So, the device is still visible via rfkill even after nci_dev.cmd_wq is destroyed. Let's unregister the device from rfkill first in nci_unregister_device(). Note that we cannot call nfc_unregister_device() before nci_close_device() because 1) nfc_unregister_device() calls device_del() which frees all memory allocated by devm_kzalloc() and linked to ndev->conn_info_list 2) nci_rx_work() could try to queue nci_conn_info to ndev->conn_info_list which could be leaked Thus, nfc_unregister_device() is split into two functions so we can remove rfkill interfaces only before nci_close_device(). [0]: DEBUG_LOCKS_WARN_ON(1) WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349 WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349 Modules linked in: CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline] RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187 Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f RSP: 0018:ffffc9000c767680 EFLAGS: 00010046 RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000 RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0 RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4 R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2 R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30 FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0 Call Trace: <TASK> lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868 touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940 __flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982 nci_close_device+0x302/0x630 net/nfc/nci/core.c:567 nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639 nfc_dev_down+0x152/0x290 net/nfc/core.c:161 nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179 rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346 rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301 vfs_write+0x29a/0xb90 fs/read_write.c:684 ksys_write+0x150/0x270 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa59b39acb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9 RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007 RBP: 00007fa59b408bf7 R08: ---truncated--- | ||||
| CVE-2026-23165 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sfc: fix deadlock in RSS config read Since cited commit, core locks the net_device's rss_lock when handling ethtool -x command, so driver's implementation should not lock it again. Remove the latter. | ||||
| CVE-2026-23160 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix memory leak in octep_device_setup() In octep_device_setup(), if octep_ctrl_net_init() fails, the function returns directly without unmapping the mapped resources and freeing the allocated configuration memory. Fix this by jumping to the unsupported_dev label, which performs the necessary cleanup. This aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-23158 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called. | ||||
| CVE-2026-23155 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): fix error message Sinc commit 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error") a failing resubmit URB will print an info message. In the case of a short read where netdev has not yet been assigned, initialize as NULL to avoid dereferencing an undefined value. Also report the error value of the failed resubmit. | ||||
| CVE-2026-23157 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not strictly require dirty metadata threshold for metadata writepages [BUG] There is an internal report that over 1000 processes are waiting at the io_schedule_timeout() of balance_dirty_pages(), causing a system hang and trigger a kernel coredump. The kernel is v6.4 kernel based, but the root problem still applies to any upstream kernel before v6.18. [CAUSE] From Jan Kara for his wisdom on the dirty page balance behavior first. This cgroup dirty limit was what was actually playing the role here because the cgroup had only a small amount of memory and so the dirty limit for it was something like 16MB. Dirty throttling is responsible for enforcing that nobody can dirty (significantly) more dirty memory than there's dirty limit. Thus when a task is dirtying pages it periodically enters into balance_dirty_pages() and we let it sleep there to slow down the dirtying. When the system is over dirty limit already (either globally or within a cgroup of the running task), we will not let the task exit from balance_dirty_pages() until the number of dirty pages drops below the limit. So in this particular case, as I already mentioned, there was a cgroup with relatively small amount of memory and as a result with dirty limit set at 16MB. A task from that cgroup has dirtied about 28MB worth of pages in btrfs btree inode and these were practically the only dirty pages in that cgroup. So that means the only way to reduce the dirty pages of that cgroup is to writeback the dirty pages of btrfs btree inode, and only after that those processes can exit balance_dirty_pages(). Now back to the btrfs part, btree_writepages() is responsible for writing back dirty btree inode pages. The problem here is, there is a btrfs internal threshold that if the btree inode's dirty bytes are below the 32M threshold, it will not do any writeback. This behavior is to batch as much metadata as possible so we won't write back those tree blocks and then later re-COW them again for another modification. This internal 32MiB is higher than the existing dirty page size (28MiB), meaning no writeback will happen, causing a deadlock between btrfs and cgroup: - Btrfs doesn't want to write back btree inode until more dirty pages - Cgroup/MM doesn't want more dirty pages for btrfs btree inode Thus any process touching that btree inode is put into sleep until the number of dirty pages is reduced. Thanks Jan Kara a lot for the analysis of the root cause. [ENHANCEMENT] Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the btree_inode"), btrfs btree inode pages will only be charged to the root cgroup which should have a much larger limit than btrfs' 32MiB threshold. So it should not affect newer kernels. But for all current LTS kernels, they are all affected by this problem, and backporting the whole AS_KERNEL_FILE may not be a good idea. Even for newer kernels I still think it's a good idea to get rid of the internal threshold at btree_writepages(), since for most cases cgroup/MM has a better view of full system memory usage than btrfs' fixed threshold. For internal callers using btrfs_btree_balance_dirty() since that function is already doing internal threshold check, we don't need to bother them. But for external callers of btree_writepages(), just respect their requests and write back whatever they want, ignoring the internal btrfs threshold to avoid such deadlock on btree inode dirty page balancing. | ||||
| CVE-2025-71200 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes. Add a check to prevent illegal clock reduction through debugfs: root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock root@debian:/# [ 30.090146] mmc0: running CQE recovery mmc0: cqhci: Failed to halt mmc0: cqhci: spurious TCN for tag 0 WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24 Modules linked in: CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cqhci_irq+0x254/0x818 lr : cqhci_irq+0x254/0x818 ... | ||||
| CVE-2025-71201 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix early read unlock of page with EOF in middle The read result collection for buffered reads seems to run ahead of the completion of subrequests under some circumstances, as can be seen in the following log snippet: 9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0 ... netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0 ... netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2 netfs_folio: i=157f3 ix=00004-00004 read-done netfs_folio: i=157f3 ix=00004-00004 read-unlock netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2 netfs_folio: i=157f3 ix=00005-00005 read-done netfs_folio: i=157f3 ix=00005-00005 read-unlock ... netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8 ... netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0 netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0 The 'cto=5fb2' indicates the collected file pos we've collected results to so far - but we still have 0x4e more bytes to go - so we shouldn't have collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail happens after we unlock the folio, allowing the application to see the uncleared tail through mmap. The problem is that netfs_read_unlock_folios() will unlock a folio in which the amount of read results collected hits EOF position - but the ZERO subreq lies beyond that and so happens after. Fix this by changing the end check to always be the end of the folio and never the end of the file. In the future, I should look at clearing to the end of the folio here rather than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can run in parallel with an async READ subreq. Further, the ZERO subreq may still be necessary to, say, handle extents in a ceph file that don't have any backing store and are thus implicitly all zeros. This can be reproduced by creating a file, the size of which doesn't align to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something like: xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \ -c "mread -v 0 0x6000" /xfstest.test/x The last 0x4e bytes should all be 00, but if the tail hasn't been cleared yet, you may see rubbish there. This can be reproduced with kafs by modifying the kernel to disable the call to netfs_read_subreq_progress() and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD. Reproduction can be made easier by inserting an mdelay(100) in netfs_issue_read() for the ZERO-subreq case. AFS and CIFS are normally unlikely to show this as they dispatch READ ops asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is completely synchronous, so the ZERO-subreq will always happen after. It isn't seen all the time, though, because the collection may be done in a worker thread. | ||||
| CVE-2026-1254 | 2 Wordpress, Wpchill | 2 Wordpress, Modula Image Gallery – Photo Grid & Video Gallery | 2026-02-18 | 4.3 Medium |
| The Modula Image Gallery – Photo Grid & Video Gallery plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.13.6. This is due to the plugin not properly verifying that a user is authorized to modify specific posts before updating them via the REST API. This makes it possible for authenticated attackers, with contributor level access and above, to update the title, excerpt, and content of arbitrary posts by passing post IDs in the modulaImages field when editing a gallery. | ||||
| CVE-2026-1303 | 2 Matthieuscarset, Wordpress | 2 Mailchimp Campaigns, Wordpress | 2026-02-18 | 5.3 Medium |
| The MailChimp Campaigns plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 3.2.4. This is due to missing capability checks on the `mailchimp_campaigns_manager_disconnect_app` function that is hooked to the AJAX action of the same name. This makes it possible for authenticated attackers, with Subscriber-level access and above, to disconnect the site from its MailChimp synchronization app, disrupting automated email campaigns and marketing integrations. | ||||
| CVE-2026-1394 | 2 Dmitritechs, Wordpress | 2 Wp Quick Contact Us, Wordpress | 2026-02-18 | 4.3 Medium |
| The WP Quick Contact Us plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0. This is due to missing nonce validation on the settings update functionality. This makes it possible for unauthenticated attackers to update the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. | ||||
| CVE-2026-1792 | 2 Owencutajar, Wordpress | 2 Geo Widget, Wordpress | 2026-02-18 | 6.1 Medium |
| The Geo Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the URL path in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-1901 | 2 Questionpro, Wordpress | 2 Questionpro Surveys, Wordpress | 2026-02-18 | 6.4 Medium |
| The QuestionPro Surveys plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'questionpro' shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-1903 | 2 Shellbot, Wordpress | 2 Ravelry Designs Widget, Wordpress | 2026-02-18 | 6.4 Medium |
| The Ravelry Designs Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'layout' attribute of the 'sb_ravelry_designs' shortcode in all versions up to, and including, 1.0.0. This is due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-1905 | 2 Devmw, Wordpress | 2 Sphere Manager, Wordpress | 2026-02-18 | 6.4 Medium |
| The Sphere Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'width' parameter in the 'show_sphere_image' shortcode in all versions up to, and including, 1.0.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-2027 | 2 Ampenhancer, Wordpress | 2 Amp Enhancer – Compatibility Layer For Official Amp Plugin, Wordpress | 2026-02-18 | 4.4 Medium |
| The AMP Enhancer – Compatibility Layer for Official AMP Plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the AMP Custom CSS setting in all versions up to, and including, 1.0.49 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. | ||||
| CVE-2026-23113 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop Currently this is checked before running the pending work. Normally this is quite fine, as work items either end up blocking (which will create a new worker for other items), or they complete fairly quickly. But syzbot reports an issue where io-wq takes seemingly forever to exit, and with a bit of debugging, this turns out to be because it queues a bunch of big (2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn't support ->read_iter(), loop_rw_iter() ends up handling them. Each read returns 16MB of data read, which takes 20 (!!) seconds. With a bunch of these pending, processing the whole chain can take a long time. Easily longer than the syzbot uninterruptible sleep timeout of 140 seconds. This then triggers a complaint off the io-wq exit path: INFO: task syz.4.135:6326 blocked for more than 143 seconds. Not tainted syzkaller #0 Blocked by coredump. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000 Call Trace: <TASK> context_switch kernel/sched/core.c:5256 [inline] __schedule+0x1139/0x6150 kernel/sched/core.c:6863 __schedule_loop kernel/sched/core.c:6945 [inline] schedule+0xe7/0x3a0 kernel/sched/core.c:6960 schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:100 [inline] __wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121 io_wq_exit_workers io_uring/io-wq.c:1328 [inline] io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356 io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203 io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651 io_uring_files_cancel include/linux/io_uring.h:19 [inline] do_exit+0x2ce/0x2bd0 kernel/exit.c:911 do_group_exit+0xd3/0x2a0 kernel/exit.c:1112 get_signal+0x2671/0x26d0 kernel/signal.c:3034 arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:41 [inline] exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa02738f749 RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098 RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98 There's really nothing wrong here, outside of processing these reads will take a LONG time. However, we can speed up the exit by checking the IO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot will exit the ring after queueing up all of these reads. Then once the first item is processed, io-wq will simply cancel the rest. That should avoid syzbot running into this complaint again. | ||||
| CVE-2026-23116 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset and clock enable bits, but is ungated and reset together with the VPUs. So we can't reset G1 or G2 separately, it may led to the system hang. Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data. Let imx8mq_vpu_power_notifier() do really vpu reset. | ||||