Export limit exceeded: 326172 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 326172 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (326172 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-39198 | 3 Fedoraproject, Linux, Redhat | 3 Fedora, Linux Kernel, Enterprise Linux | 2026-02-18 | 7.5 High |
| A race condition was found in the QXL driver in the Linux kernel. The qxl_mode_dumb_create() function dereferences the qobj returned by the qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. This flaw allows an attacker to guess the returned handle value and trigger a use-after-free issue, potentially leading to a denial of service or privilege escalation. | ||||
| CVE-2023-29130 | 1 Siemens | 1 Simatic Cn 4100 Firmware | 2026-02-18 | 9.9 Critical |
| A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.5). Affected device consists of improper access controls in the configuration files that leads to privilege escalation. An attacker could gain admin access with this vulnerability leading to complete device control. | ||||
| CVE-2023-29131 | 1 Siemens | 1 Simatic Cn 4100 Firmware | 2026-02-18 | 7.4 High |
| A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.5). Affected device consists of an incorrect default value in the SSH configuration. This could allow an attacker to bypass network isolation. | ||||
| CVE-2025-66624 | 1 Bacnetstack | 1 Bacnet Stack | 2026-02-18 | 7.5 High |
| BACnet Protocol Stack library provides a BACnet application layer, network layer and media access (MAC) layer communications services. Prior to 1.5.0.rc2, The npdu_is_expected_reply function in src/bacnet/npdu.c indexes request_pdu[offset+2/3/5] and reply_pdu[offset+1/2/4] without verifying that those APDU bytes exist. bacnet_npdu_decode() can return offset == 2 for a 2-byte NPDU, so tiny PDUs pass the version check and then get read out of bounds. On ASan/MPU/strict builds this is an immediate crash (DoS). On unprotected builds it is undefined behavior and can mis-route replies; RCE is unlikely because only reads occur, but DoS is reliable. | ||||
| CVE-2026-25585 | 2 Color, Internationalcolorconsortium | 2 Iccdev, Iccdev | 2026-02-18 | 7.8 High |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.3, there is a vulnerability IccCmm.cpp:5793 when reading through index during ICC profile processing. The malformed ICC profile triggers improper array bounds validation in the color management module, resulting in an out-of-bounds read that can lead to memory disclosure or segmentation fault from accessing memory beyond the array boundary. This issue has been patched in version 2.3.1.3. | ||||
| CVE-2020-37125 | 1 Edimax | 2 Ew-7438rpn Mini, Ew-7438rpn Mini Firmware | 2026-02-18 | 9.8 Critical |
| Edimax EW-7438RPn-v3 Mini 1.27 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary commands through the /goform/mp endpoint. Attackers can exploit the vulnerability by sending crafted POST requests with command injection payloads to download and execute malicious scripts on the device. | ||||
| CVE-2020-37149 | 1 Edimax | 2 Ew-7438rpn Mini, Ew-7438rpn Mini Firmware | 2026-02-18 | 8.1 High |
| Edimax EW-7438RPn-v3 Mini 1.27 is vulnerable to cross-site request forgery (CSRF) that can lead to command execution. An attacker can trick an authenticated user into submitting a crafted form to the /goform/mp endpoint, resulting in arbitrary command execution on the device with the user's privileges. | ||||
| CVE-2026-25123 | 2 Homarr, Homarr-labs | 2 Homarr, Homarr | 2026-02-18 | 5.3 Medium |
| Homarr is an open-source dashboard. Prior to 1.52.0, a public (unauthenticated) tRPC endpoint widget.app.ping accepts an arbitrary url and performs a server-side request to that URL. This allows an unauthenticated attacker to trigger outbound HTTP requests from the Homarr server, enabling SSRF behavior and a reliable port-scanning primitive (open vs closed ports can be inferred from statusCode vs fetch failed and timing). This vulnerability is fixed in 1.52.0. | ||||
| CVE-2026-25881 | 1 Nyariv | 1 Sandboxjs | 2026-02-18 | 9.1 Critical |
| SandboxJS is a JavaScript sandboxing library. Prior to 0.8.31, a sandbox escape vulnerability allows sandboxed code to mutate host built-in prototypes by laundering the isGlobal protection flag through array literal intermediaries. When a global prototype reference (e.g., Map.prototype, Set.prototype) is placed into an array and retrieved, the isGlobal taint is stripped, permitting direct prototype mutation from within the sandbox. This results in persistent host-side prototype pollution and may enable RCE in applications that use polluted properties in sensitive sinks (example gadget: execSync(obj.cmd)). This vulnerability is fixed in 0.8.31. | ||||
| CVE-2024-25846 | 1 Myprestamodules | 2 Product Catalog \(csv\, Excel\) Import, Simpleimportproduct | 2026-02-18 | 9.1 Critical |
| In the module "Product Catalog (CSV, Excel) Import" (simpleimportproduct) <= 6.7.0 from MyPrestaModules for PrestaShop, a guest can upload files with extensions .php. | ||||
| CVE-2023-39675 | 1 Myprestamodules | 1 Product Catalog \(csv\, Excel\) Import | 2026-02-18 | 9.8 Critical |
| SimpleImportProduct Prestashop Module v6.2.9 was discovered to contain a SQL injection vulnerability via the key parameter at send.php. | ||||
| CVE-2023-39677 | 2 Myprestamodules, Updateproducts Project | 2 Product Catalog \(csv\, Excel\) Import, Updateproducts | 2026-02-18 | 7.5 High |
| MyPrestaModules Prestashop Module v6.2.9 and UpdateProducts Prestashop Module v3.6.9 were discovered to contain a PHPInfo information disclosure vulnerability via send.php. | ||||
| CVE-2026-26268 | 2 Anysphere, Cursor | 2 Cursor, Cursor | 2026-02-18 | 8.1 High |
| Cursor is a code editor built for programming with AI. Sandbox escape via writing .git configuration was possible in versions prior to 2.5. A malicious agent (ie prompt injection) could write to improperly protected .git settings, including git hooks, which may cause out-of-sandbox RCE next time they are triggered. No user interaction was required as Git executes these commands automatically. Fixed in version 2.5. | ||||
| CVE-2020-37150 | 1 Edimax | 2 Ew-7438rpn Mini, Ew-7438rpn Mini Firmware | 2026-02-18 | 7.5 High |
| Edimax EW-7438RPn-v3 Mini 1.27 allows unauthenticated attackers to access the /wizard_reboot.asp page in unsetup mode, which discloses the Wi-Fi SSID and security key. Attackers can retrieve the wireless password by sending a GET request to this endpoint, exposing sensitive information without authentication. | ||||
| CVE-2026-0714 | 1 Moxa | 71 Uc-1200a Series, Uc-1222a, Uc-1222a Firmware and 68 more | 2026-02-18 | 6.8 Medium |
| A physical attack vulnerability exists in certain Moxa industrial computers using TPM-backed LUKS full-disk encryption on Moxa Industrial Linux 3, where the discrete TPM is connected to the CPU via an SPI bus. Exploitation requires invasive physical access, including opening the device and attaching external equipment to the SPI bus to capture TPM communications. If successful, the captured data may allow offline decryption of eMMC contents. This attack cannot be performed through brief or opportunistic physical access and requires extended physical access, possession of the device, appropriate equipment, and sufficient time for signal capture and analysis. Remote exploitation is not possible. | ||||
| CVE-2026-23172 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: fix potential skb->frags overflow in RX path When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Malicious, buggy, or compromised firmware could potentially craft packets with more fragments than the kernel expects. Fix this by adding a bounds check before calling skb_add_rx_frag() to ensure nr_frags does not exceed MAX_SKB_FRAGS. The check must be performed before unmapping to avoid a page leak and double DMA unmap during device teardown. | ||||
| CVE-2026-23163 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and ih2 interrupt ring buffers are not initialized. This is by design, as these secondary IH rings are only available on discrete GPUs. See vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when AMD_IS_APU is set. However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to get the timestamp of the last interrupt entry. When retry faults are enabled on APUs (noretry=0), this function is called from the SVM page fault recovery path, resulting in a NULL pointer dereference when amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[]. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000004 RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu] Call Trace: amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu] svm_range_restore_pages+0xae5/0x11c0 [amdgpu] amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu] gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu] amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu] amdgpu_ih_process+0x84/0x100 [amdgpu] This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW IP 9.3.0 from noretry=1") which changed the default for Renoir APU from noretry=1 to noretry=0, enabling retry fault handling and thus exercising the buggy code path. Fix this by adding a check for ih1.ring_size before attempting to use it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu: Rework retry fault removal"). This is needed if the hardware doesn't support secondary HW IH rings. v2: additional updates (Alex) (cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526) | ||||
| CVE-2026-0559 | 2 Stylemix, Wordpress | 2 Masterstudy Lms Wordpress Plugin – For Online Courses And Education, Wordpress | 2026-02-18 | 6.4 Medium |
| The MasterStudy LMS WordPress Plugin – for Online Courses and Education plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'stm_lms_courses_grid_display' shortcode in all versions up to, and including, 3.7.11 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-23173 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, delete flows only for existing peers When deleting TC steering flows, iterate only over actual devcom peers instead of assuming all possible ports exist. This avoids touching non-existent peers and ensures cleanup is limited to devices the driver is currently connected to. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 133c8a067 P4D 0 Oops: Oops: 0002 [#1] SMP CPU: 19 UID: 0 PID: 2169 Comm: tc Not tainted 6.18.0+ #156 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0xbe/0x200 [mlx5_core] Code: 00 00 a8 08 74 a8 49 8b 46 18 f6 c4 02 74 9f 4c 8d bf a0 12 00 00 4c 89 ff e8 0e e7 96 e1 49 8b 44 24 08 49 8b 0c 24 4c 89 ff <48> 89 41 08 48 89 08 49 89 2c 24 49 89 5c 24 08 e8 7d ce 96 e1 49 RSP: 0018:ff11000143867528 EFLAGS: 00010246 RAX: 0000000000000000 RBX: dead000000000122 RCX: 0000000000000000 RDX: ff11000143691580 RSI: ff110001026e5000 RDI: ff11000106f3d2a0 RBP: dead000000000100 R08: 00000000000003fd R09: 0000000000000002 R10: ff11000101c75690 R11: ff1100085faea178 R12: ff11000115f0ae78 R13: 0000000000000000 R14: ff11000115f0a800 R15: ff11000106f3d2a0 FS: 00007f35236bf740(0000) GS:ff110008dc809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000157a01001 CR4: 0000000000373eb0 Call Trace: <TASK> mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] mlx5e_flow_put+0x25/0x50 [mlx5_core] mlx5e_delete_flower+0x2a6/0x3e0 [mlx5_core] tc_setup_cb_reoffload+0x20/0x80 fl_reoffload+0x26f/0x2f0 [cls_flower] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] tcf_block_playback_offloads+0x9e/0x1c0 tcf_block_unbind+0x7b/0xd0 tcf_block_setup+0x186/0x1d0 tcf_block_offload_cmd.isra.0+0xef/0x130 tcf_block_offload_unbind+0x43/0x70 __tcf_block_put+0x85/0x160 ingress_destroy+0x32/0x110 [sch_ingress] __qdisc_destroy+0x44/0x100 qdisc_graft+0x22b/0x610 tc_get_qdisc+0x183/0x4d0 rtnetlink_rcv_msg+0x2d7/0x3d0 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x249/0x320 ? __alloc_skb+0x102/0x1f0 netlink_sendmsg+0x1e3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1ef/0x230 ? copy_msghdr_from_user+0x6c/0xa0 ___sys_sendmsg+0x7f/0xc0 ? ___sys_recvmsg+0x8a/0xc0 ? __sys_sendto+0x119/0x180 __sys_sendmsg+0x61/0xb0 do_syscall_64+0x55/0x640 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f35238bb764 Code: 15 b9 86 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d e5 08 0d 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffed4c35638 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a2efcc75e0 RCX: 00007f35238bb764 RDX: 0000000000000000 RSI: 00007ffed4c356a0 RDI: 0000000000000003 RBP: 00007ffed4c35710 R08: 0000000000000010 R09: 00007f3523984b20 R10: 0000000000000004 R11: 0000000000000202 R12: 00007ffed4c35790 R13: 000000006947df8f R14: 000055a2efcc75e0 R15: 00007ffed4c35780 | ||||
| CVE-2026-23170 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imx/tve: fix probe device leak Make sure to drop the reference taken to the DDC device during probe on probe failure (e.g. probe deferral) and on driver unbind. | ||||