| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| psd-tools is a Python package for working with Adobe Photoshop PSD files. Prior to version 1.12.2, when a PSD file contains malformed RLE-compressed image data (e.g. a literal run that extends past the expected row size), decode_rle() raises ValueError which propagated all the way to the user, crashing psd.composite() and psd-tools export. decompress() already had a fallback that replaces failed channels with black pixels when result is None, but it never triggered because the ValueError from decode_rle() was not caught. The fix in version 1.12.2 wraps the decode_rle() call in a try/except so the existing fallback handles the error gracefully. |
| Incorrect boundary conditions in the JavaScript: WebAssembly component. This vulnerability affects Firefox < 148 and Thunderbird < 148. |
| Caddy is an extensible server platform that uses TLS by default. Prior to version 2.11.1, two swallowed errors in `ClientAuthentication.provision()` cause mTLS client certificate authentication to silently fail open when a CA certificate file is missing, unreadable, or malformed. The server starts without error but accepts any client certificate signed by any system-trusted CA, completely bypassing the intended private CA trust boundary. Any deployment using `trusted_ca_cert_file` or `trusted_ca_certs_pem_files` for mTLS will silently degrade to accepting any system-trusted client certificate if the CA file becomes unavailable. This can happen due to a typo in the path, file rotation, corruption, or permission changes. The server gives no indication that mTLS is misconfigured. Version 2.11.1 fixes the vulnerability. |
| Memory corruption during memory assignment to headless peripheral VM due to incorrect error code handling. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| Improper handling of insufficient permissions or privileges in Microsoft Dataverse allows an authorized attacker to elevate privileges over a network. |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In VerifyNoOverlapInSessions of apexd.cpp, there is a possible way to block security updates due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Sandbox escape due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability affects Firefox < 146, Firefox ESR < 115.31, Firefox ESR < 140.6, Thunderbird < 146, and Thunderbird < 140.6. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable data corruption. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| The sequence of packets received by a Networking server are not correctly checked.
An attacker could exploit this vulnerability to send specially crafted messages to force the application to stop. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on EX4k Series and QFX5k Series platforms allows an unauthenticated network-adjacent attacker flapping an interface to cause traffic between VXLAN Network Identifiers (VNIs) to drop, leading to a Denial of Service (DoS).
On all EX4k and QFX5k platforms, a link flap in an
EVPN-VXLAN configuration Link Aggregation Group (LAG)
results in Inter-VNI traffic dropping when there are multiple load-balanced next-hop routes for the same destination.
This issue is only applicable to systems that support EVPN-VXLAN Virtual Port-Link Aggregation Groups (VPLAG), such as the QFX5110, QFX5120, QFX5200, EX4100, EX4300, EX4400, and EX4650.
Service can only be restored by restarting the affected FPC via the 'request chassis fpc restart slot <slot-number>' command.
This issue affects Junos OS
on EX4k and QFX5k Series:
* all versions before 21.4R3-S12,
* all versions of 22.2
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2. |
| free5gc UDM provides Unified Data Management (UDM) for free5GC, an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, the service reliably leaks detailed internal error messages (e.g., strconv.ParseInt parsing errors) to remote clients when processing invalid pduSessionId inputs. This exposes implementation details and can be used for service fingerprinting. All deployments of free5GC using the UDM Nudm_UECM DELETE service may be vulnerable. free5gc/udm pull request 76 contains a fix for the issue. No direct workaround is available at the application level. Applying the official patch is recommended. |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). The Web UI of affected devices does not check the length of parameters in certain conditions. This allows a malicious admin to crash the server by sending a crafted request to the server. The server will automatically restart. |
| An improper check for unusual conditions in Zyxel NWA110AX firmware verisons prior to 6.50(ABTG.0)C0, which could allow a LAN attacker to cause a temporary denial-of-service (DoS) by sending crafted VLAN frames if the MAC address of the vulnerable AP were intercepted by the attacker. |
| Wasmtime is a runtime for WebAssembly. Starting with Wasmtime 39.0.0, the `component-model-async` feature became the default, which brought with it a new implementation of `[Typed]Func::call_async` which made it capable of calling async-typed guest export functions. However, that implementation had a bug leading to a panic under certain circumstances: First, the host embedding calls `[Typed]Func::call_async` on a function exported by a component, polling the returned `Future` once. Second, the component function yields control to the async runtime (e.g. Tokio), e.g. due to a call to host function registered using `LinkerInstance::func_wrap_async` which yields, or due an epoch interruption. Third, the host embedding drops the `Future` after polling it once. This leaves the component instance in a non-reenterable state since the call never had a chance to complete. Fourth, the host embedding calls `[Typed]Func::call_async` again, polling the returned `Future`. Since the component instance cannot be entered at this point, the call traps, but not before allocating a task and thread for the call. Fifth, the host embedding ignores the trap and drops the `Future`. This panics due to the runtime attempting to dispose of the task created above, which panics since the thread has not yet exited. When a host embedder using the affected versions of Wasmtime calls `wasmtime::component::[Typed]Func::call_async` on a guest export and then drops the returned future without waiting for it to resolve, and then does so again with the same component instance, Wasmtime will panic. Embeddings that have the `component-model-async` compile-time feature disabled are unaffected. Wasmtime 40.0.4 and 41.0.4 have been patched to fix this issue. Versions 42.0.0 and later are not affected. If an embedding is not actually using any component-model-async features then disabling the `component-model-async` Cargo feature can work around this issue. This issue can also be worked around by either ensuring every `call_async` future is awaited until it completes or refraining from using the `Store` again after dropping a not-yet-resolved `call_async` future. |
| An issue was discovered in Joomla! 2.5.0 through 3.9.27. Install action in com_installer lack the required hardcoded ACL checks for superusers. A default system is not affected cause the default ACL for com_installer is limited to super users already. |
