| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input Validation vulnerability in NETGEAR R6260 and NETGEAR R6850 allows unauthenticated attackers connected to LAN with ability to perform MiTM attacks and control over DNS Server to perform command execution.This issue affects R6260: through 1.1.0.86; R6850: through 1.1.0.86. |
| Improper certificate
validation in firmware update logic in NETGEAR RAX30 (Nighthawk AX5 5-Stream
AX2400 WiFi 6 Router) and RAXE300 (Nighthawk AXE7800 Tri-Band
WiFi 6E Router) allows attackers with the ability to intercept and
tamper traffic destined to the device to execute arbitrary commands on the
device.
Devices
with automatic updates enabled may already have this patch applied. If not,
please check the firmware version and update to the
latest.
Fixed in:
RAX30 firmware
1.0.14.108 or later.
RAXE300 firmware
1.0.9.82 or later |
| Improper input validation
in NETGEAR DGN2200v4 (N300 Wireless ADSL2+ Modem Router) allows attackers with
direct network access to the device to potentially execute code on the device.
Please check the firmware version and update to the latest.
Fixed
in:
DGN2200v4
firmware 1.0.0.132 or later |
| A vulnerability in the speedtest feature of affected NETGEAR Nighthawk routers, caused by improper input validation, can allow attackers on the router's WAN side, using attacker-in-the-middle techniques (MiTM) to manipulate DNS responses and execute commands when speedtests are run.
This issue affects RS700: through 1.0.7.82; RAX54Sv2 : before V1.1.6.36; RAX41v2: before V1.1.6.36; RAX50: before V1.2.14.114; RAXE500: before V1.2.14.114; RAX41: before V1.0.17.142; RAX43: before V1.0.17.142; RAX35v2: before V1.0.17.142; RAXE450: before V1.2.14.114; RAX43v2: before V1.1.6.36; RAX42: before V1.0.17.142; RAX45: before V1.0.17.142; RAX50v2: before V1.1.6.36; MR90: before V1.0.2.46; MS90: before V1.0.2.46; RAX42v2: before V1.1.6.36; RAX49S: before V1.1.6.36. |
| An insufficient input validation vulnerability in NETGEAR Orbi routers
allows attackers connected to the router's LAN to execute OS command
injections. |
| An authentication bypass vulnerability in NETGEAR Orbi devices allows
users connected to the local network to access the router web interface
as an admin. |
| An insufficient input validation vulnerability in the NETGEAR XR1000v2
allows attackers connected to the router's LAN to execute OS command
injections. |
| An insufficient authentication vulnerability in NETGEAR WiFi range
extenders allows a network adjacent attacker with WiFi authentication or
a physical Ethernet port connection to bypass the authentication
process and access the admin panel. |
| A path traversal vulnerability in NETGEAR WiFi range extenders allows
an attacker with LAN authentication to access the router's IP and
review the contents of the dynamically generated webproc file, which
records the username and password submitted to the router GUI. |
| An insufficient input validation vulnerability in NETGEAR Orbi devices'
DHCPv6 functionality allows network adjacent attackers authenticated
over WiFi or on LAN to execute OS command injections on the router.
DHCPv6 is not enabled by default. |
| In Netgear RAX30 V1.0.10.94_3, the USERLIMIT_GLOBAL option is set to 0 in multiple bftpd-related configuration files. This can cause DoS attacks when unlimited users are connected. |
| NETGEAR DGN1000 before 1.1.00.48 is vulnerable to an authentication bypass vulnerability. A remote and unauthenticated attacker can execute arbitrary operating system commands as root by sending crafted HTTP requests to the setup.cgi endpoint. This vulnerability has been observed to be exploited in the wild since at least 2017 and specifically by the Shadowserver Foundation on 2025-02-06 UTC. |
| ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request. |
| An issue was discovered on NETGEAR R8500, R8300, R7000, R6400, R7300, R7100LG, R6300v2, WNDR3400v3, WNR3500Lv2, R6250, R6700, R6900, and R8000 devices. They are prone to password disclosure via simple crafted requests to the web management server. The bug is exploitable remotely if the remote management option is set, and can also be exploited given access to the router over LAN or WLAN. When trying to access the web panel, a user is asked to authenticate; if the authentication is canceled and password recovery is not enabled, the user is redirected to a page that exposes a password recovery token. If a user supplies the correct token to the page /passwordrecovered.cgi?id=TOKEN (and password recovery is not enabled), they will receive the admin password for the router. If password recovery is set the exploit will fail, as it will ask the user for the recovery questions that were previously set when enabling that feature. This is persistent (even after disabling the recovery option, the exploit will fail) because the router will ask for the security questions. |
| NETGEAR R6250 before 1.0.4.6.Beta, R6400 before 1.0.1.18.Beta, R6700 before 1.0.1.14.Beta, R6900, R7000 before 1.0.7.6.Beta, R7100LG before 1.0.0.28.Beta, R7300DST before 1.0.0.46.Beta, R7900 before 1.0.1.8.Beta, R8000 before 1.0.3.26.Beta, D6220, D6400, D7000, and possibly other routers allow remote attackers to execute arbitrary commands via shell metacharacters in the path info to cgi-bin/. |
| (1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands. |
| The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution. |
| An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN1000B model firmware versions 1.1.00.24 and 1.1.00.45) via the TimeToLive parameter in the setup.cgi endpoint. The vulnerability arises from improper input neutralization, enabling command injection through crafted POST requests. This flaw enables remote attackers to deploy payloads or manipulate system state post-authentication. |
| An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored. |
| NETGEAR R7800 net-cgi Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 routers. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of the soap_block_table file. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of root.
. Was ZDI-CAN-13055. |
