| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vitess is a database clustering system for horizontal scaling of MySQL. Prior to versions 23.0.3 and 22.0.4, anyone with read/write access to the backup storage location (e.g. an S3 bucket) can manipulate backup manifest files so that files in the manifest — which may be files that they have also added to the manifest and backup contents — are written to any accessible location on restore. This is a common path traversal security issue. This can be used to provide that attacker with unintended/unauthorized access to the production deployment environment — allowing them to access information available in that environment as well as run any additional arbitrary commands there. Versions 23.0.3 and 22.0.4 contain a patch. No known workarounds are available. |
| Dragonfly is an open source P2P-based file distribution and image acceleration system. In versions 2.4.1-rc.0 and below, the Job API endpoints (/api/v1/jobs) lack JWT authentication middleware and RBAC authorization checks in the routing configuration. This allows any unauthenticated user with access to the Manager API to view, update and delete jobs. The issue is fixed in version 2.4.1-rc.1. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. The WebSockets handling of NATS messages handles compressed messages via the WebSockets negotiated compression. Prior to versions 2.11.2 and 2.12.3, the implementation bound the memory size of a NATS message but did not independently bound the memory consumption of the memory stream when constructing a NATS message which might then fail validation for size reasons. An attacker can use a compression bomb to cause excessive memory consumption, often resulting in the operating system terminating the server process. The use of compression is negotiated before authentication, so this does not require valid NATS credentials to exploit. The fix, present in versions 2.11.2 and 2.12.3, was to bounds the decompression to fail once the message was too large, instead of continuing on. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points. |
| In da, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS09291294; Issue ID: MSV-2061. |
| In power, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS09270402; Issue ID: MSV-2020. |
| In wlan STA driver, there is a possible out of bounds write due to improper input validation. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00389496 / ALPS09137491; Issue ID: MSV-1835. |
| In wlan STA FW, there is a possible out of bounds write due to improper input validation. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00389045 / ALPS09136494; Issue ID: MSV-1796. |
| In monitor_hang, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS09989078; Issue ID: MSV-3964. |
| In preloader, there is a possible escalation of privilege due to an insecure default value. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10068463; Issue ID: MSV-4141. |
| In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010441; Issue ID: MSV-3967. |
| In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010443; Issue ID: MSV-3966. |
| PyTorch is a Python package that provides tensor computation. Prior to version 2.10.0, a vulnerability in PyTorch's `weights_only` unpickler allows an attacker to craft a malicious checkpoint file (`.pth`) that, when loaded with `torch.load(..., weights_only=True)`, can corrupt memory and potentially lead to arbitrary code execution. Version 2.10.0 fixes the issue. |
| Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations. From 0.47.0 to before 0.50.1, when a chain consisting of multiple CA (Certificate Authority) certificates is used in the trusted certificates configuration of a Kafka Connect operand or of the target cluster in the Kafka MirrorMaker 2 operand, all of the certificates that are part of the CA chain will be trusted individually when connecting to the Apache Kafka cluster. Due to this error, the affected operand (Kafka Connect or Kafka MirrorMaker 2) might accept connections to Kafka brokers using server certificates signed by one of the other CAs in the CA chain and not just by the last CA in the chain. This issue is fixed in Strimzi 0.50.1. |
| Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations. In versions 0.49.0 through 0.50.0, when using a custom Cluster or Clients CA with a multistage CA chain consisting of multiple CAs, Strimzi incorrectly configures the trusted certificates for mTLS authentication on the internal as well as user-configured listeners. All CAs from the CA chain will be trusted. And users with certificates signed by any of the CAs in the chain will be able to authenticate. This issue affects only users using a custom Cluster or Clients CA with a multistage CA chain consisting of multiple CAs. It does not affect users using the Strimzi-managed Cluster and Clients CAs. It also does not affect users using custom Cluster or Clients CA with only a single CA (i.e., no CA chain with multiple CAs). This issue has been fixed in version 0.50.1. To workaround this issue, instead of providing the full CA chain as the custom CA, users can provide only the single CA that should be used. |
| A vulnerability was found in PyTorch 2.6.0+cu124. It has been declared as critical. Affected by this vulnerability is the function torch.ops.profiler._call_end_callbacks_on_jit_fut of the component Tuple Handler. The manipulation of the argument None leads to memory corruption. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. |
| A vulnerability was found in PyTorch 2.6.0+cu124. It has been rated as problematic. Affected by this issue is the function nnq_Sigmoid of the component Quantized Sigmoid Module. The manipulation of the argument scale/zero_point leads to improper initialization. The attack needs to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. |
| Spinnaker is an open source, multi-cloud continuous delivery platform. Versions prior to 2025.1.6, 2025.2.3, and 2025.3.0 are vulnerable to server-side request forgery. The primary impact is allowing users to fetch data from a remote URL. This data can be then injected into spinnaker pipelines via helm or other methods to extract things LIKE idmsv1 authentication data. This also includes calling internal spinnaker API's via a get and similar endpoints. Further, depending upon the artifact in question, auth data may be exposed to arbitrary endpoints (e.g. GitHub auth headers) leading to credentials exposure. To trigger this, a spinnaker installation MUST have two things. The first is an artifact enabled that allows user input. This includes GitHub file artifacts, BitBucket, GitLab, HTTP artifacts and similar artifact providers. JUST enabling the http artifact provider will add a "no-auth" http provider that could be used to extract link local data (e.g. AWS Metadata information). The second is a system that can consume the output of these artifacts. e.g. Rosco helm can use this to fetch values data. K8s account manifests if the API returns JSON can be used to inject that data into the pipeline itself though the pipeline would fail. This vulnerability is fixed in versions 2025.1.6, 2025.2.3, and 2025.3.0. As a workaround, disable HTTP account types that allow user input of a given URL. This is probably not feasible in most cases. Git, Docker and other artifact account types with explicit URL configurations bypass this limitation and should be safe as they limit artifact URL loading. Alternatively, use one of the various vendors which provide OPA policies to restrict pipelines from accessing or saving a pipeline with invalid URLs. |
| Inspektor Gadget is a set of tools and framework for data collection and system inspection on Kubernetes clusters and Linux hosts using eBPF. String fields from eBPF events in columns output mode are rendered to the terminal without any sanitization of control characters or ANSI escape sequences. Therefore, a maliciously forged – partially or completely – event payload, coming from an observed container, might inject the escape sequences into the terminal of ig operators, with various effects. The columns output mode is the default when running ig run interactively. |
| Backstage is an open framework for building developer portals, and @backstage/plugin-techdocs-node provides common node.js functionalities for TechDocs. In versions of @backstage/plugin-techdocs-node prior to 1.13.11 and 1.14.1, a path traversal vulnerability in the TechDocs local generator allows attackers to read arbitrary files from the host filesystem when Backstage is configured with `techdocs.generator.runIn: local`. When processing documentation from untrusted sources, symlinks within the docs directory are followed by MkDocs during the build process. File contents are embedded into generated HTML and exposed to users who can view the documentation. This vulnerability is fixed in` @backstage/plugin-techdocs-node` versions 1.13.11 and 1.14.1. Some workarounds are available. Switch to `runIn: docker` in `app-config.yaml` and/or restrict write access to TechDocs source repositories to trusted users only. |
| Backstage is an open framework for building developer portals, and @backstage/plugin-techdocs-node provides common node.js functionalities for TechDocs. In versions of @backstage/plugin-techdocs-node prior to 1.13.11 and 1.14.1, when TechDocs is configured with `runIn: local`, a malicious actor who can submit or modify a repository's `mkdocs.yml` file can execute arbitrary Python code on the TechDocs build server via MkDocs hooks configuration. @backstage/plugin-techdocs-node versions 1.13.11 and 1.14.1 contain a fix. The fix introduces an allowlist of supported MkDocs configuration keys. Unsupported configuration keys (including `hooks`) are now removed from `mkdocs.yml` before running the generator, with a warning logged to indicate which keys were removed. Users of `@techdocs/cli` should also upgrade to the latest version, which includes the fixed `@backstage/plugin-techdocs-node` dependency. Some workarounds are available. Configure TechDocs with `runIn: docker` instead of `runIn: local` to provide container isolation, though it does not fully mitigate the risk. Limit who can modify `mkdocs.yml` files in repositories that TechDocs processes; only allow trusted contributors. Implement PR review requirements for changes to `mkdocs.yml` files to detect malicious `hooks` configurations before they are merged. Use MkDocs < 1.4.0 (e.g., 1.3.1) which does not support hooks. Note: This may limit access to newer MkDocs features. Building documentation in CI/CD pipelines using `@techdocs/cli` does not mitigate this vulnerability, as the CLI uses the same vulnerable `@backstage/plugin-techdocs-node` package. |
