| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| oak is a middleware framework for Deno's native HTTP server, Deno Deploy, Node.js 16.5 and later, Cloudflare Workers and Bun. In versions 17.1.5 and below, it's possible to significantly slow down an oak server with specially crafted values of the x-forwarded-proto or x-forwarded-for headers. |
| Transient DOS while processing multiple IKEV2 Informational Request to device from IPSEC server with different identifiers. |
| Transient DOS in Multi-Mode Call Processor due to UE failure because of heap leakage. |
| Transient DOS in WLAN Firmware while parsing a NAN management frame. |
| A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition.
This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition. |
| A flaw was found in the OpenShift Lightspeed Service, which is vulnerable to unauthenticated API request flooding. Repeated queries to non-existent endpoints inflate metrics storage and processing, consuming excessive resources. This issue can lead to monitoring system degradation, increased disk usage, and potential service unavailability. Since the issue does not require authentication, an external attacker can exhaust CPU, RAM, and disk space, impacting both application and cluster stability. |
| In Netgear R7000 V1.3.1.64_10.1.36 and EAX80 V1.0.1.70_1.0.2, the USERLIMIT_GLOBAL option is set to 0 in the bftpd.conf configuration file. This can cause DoS attacks when unlimited users are connected. |
| In TRENDnet TPL-430AP FW1.0, the USERLIMIT_GLOBAL option is set to 0 in the bftpd-related configuration file. This can cause DoS attacks when unlimited users are connected. |
| No Limit on Number of Open Sessions / Bad Session Close Behaviour in dnf5daemon-server before 5.1.17 allows a malicious user to impact Availability via No Limit on Number of Open Sessions.
There is no limit on how many sessions D-Bus clients may create using the `open_session()` D-Bus method. For each session a thread is created in dnf5daemon-server. This spends a couple of hundred megabytes of memory in the process. Further connections will become impossible, likely because no more threads can be spawned by the D-Bus service.
|
| In H3C GR2200 MiniGR1A0V100R016, the USERLIMIT_GLOBAL option is set to 0 in the /etc/bftpd.conf. This can cause DoS attacks when unlimited users are connected. |
| Vision UI is a collection of enterprise-grade, dependency-free modules for modern web projects. In versions 1.4.0 and below, the generateSecureId and getSecureRandomInt functions in security-kit versions prior to 3.5.0 (packaged in Vision UI 1.4.0 and below) are vulnerable to Denial of Service (DoS) attacks. The generateSecureId(length) function directly used the length parameter to size a Uint8Array buffer, allowing attackers to exhaust server memory through repeated requests for large IDs since the previous 1024 limit was insufficient. The getSecureRandomInt(min, max) function calculated buffer size based on the range between min and max, where large ranges caused excessive memory allocation and CPU-intensive rejection-sampling loops that could hang the thread. This issue is fixed in version 1.5.0. |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. In version 0.21.0, when many http headers fields are passed in, the library does not limit the number of headers, and the memory associated with the headers will not be released when the connection is disconnected. This leads to potential exhaustion of system memory and results in a server crash or unresponsiveness. Version 0.22.0 contains a patch for the issue. |
| An issue was discovered in GitLab CE/EE affecting all versions starting from 13.6 prior to 17.2.9, starting from 17.3 prior to 17.3.5, and starting from 17.4 prior to 17.4.2, where viewing diffs of MR with conflicts can be slow. |
| NanoMQ v0.17.9 was discovered to contain a heap use-after-free vulnerability via the component sub_Ctx_handle. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted SUBSCRIBE message. |
| Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client.
A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake.
Exploitation was possible for the duration of the connection which could be extended by the attacker.
quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue.
|
| Cloudflare quiche was discovered to be vulnerable to unbounded storage of information related to connection ID retirement, which could lead to excessive resource consumption. Each QUIC connection possesses a set of connection Identifiers (IDs); see RFC 9000 Section 5.1 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Endpoints declare the number of active connection IDs they are willing to support using the active_connection_id_limit transport parameter. The peer can create new IDs using a NEW_CONNECTION_ID frame but must stay within the active ID limit. This is done by retirement of old IDs, the endpoint sends NEW_CONNECTION_ID includes a value in the retire_prior_to field, which elicits a RETIRE_CONNECTION_ID frame as confirmation. An unauthenticated remote attacker can exploit the vulnerability by sending NEW_CONNECTION_ID frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that RETIRE_CONNECTION_ID frames can only be sent at a slower rate than they are received, leading to storage of information related to connection IDs in an unbounded queue. Quiche versions 0.19.2 and 0.20.1 are the earliest to address this problem. There is no workaround for affected versions.
|
| D-Link DIR-3040 prog.cgi websSecurityHandler Memory Leak Denial-of-Service Vulnerability. This vulnerability allows network-adjacent attackers to create a denial-of-service condition on affected installations of D-Link DIR-3040 routers. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the prog.cgi program, which handles HNAP requests made to the lighttpd webserver listening on ports 80 and 443. The issue results from the lack of proper memory management when processing HTTP cookie values. An attacker can leverage this vulnerability to create a denial-of-service condition on the system.
. Was ZDI-CAN-21668. |
| A flaw was found within the handling of SMB2_READ commands in the kernel ksmbd module. The issue results from not releasing memory after its effective lifetime. An attacker can leverage this to create a denial-of-service condition on affected installations of Linux. Authentication is not required to exploit this vulnerability, but only systems with ksmbd enabled are vulnerable. |
| File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename, and edit files. In version 2.38.0, a Denial of Service (DoS) vulnerability exists in the file processing logic when reading a file on endpoint `Filebrowser-Server-IP:PORT/files/{file-name}` . While the server correctly handles and stores uploaded files, it attempts to load the entire content into memory during read operations without size checks or resource limits. This allows an authenticated user to upload a large file and trigger uncontrolled memory consumption on read, potentially crashing the server and making it unresponsive. As of time of publication, no known patches are available. |
| automatic1111/stable-diffusion-webui version 1.10.0 contains a vulnerability where the server fails to handle excessive characters appended to the end of multipart boundaries. This flaw can be exploited by sending malformed multipart requests with arbitrary characters at the end of the boundary, leading to excessive resource consumption and a complete denial of service (DoS) for all users. The vulnerability is unauthenticated, meaning no user login or interaction is required for an attacker to exploit this issue. |
