| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to version 22.4.0rc1, the Twisted Web HTTP 1.1 server, located in the `twisted.web.http` module, parsed several HTTP request constructs more leniently than permitted by RFC 7230. This non-conformant parsing can lead to desync if requests pass through multiple HTTP parsers, potentially resulting in HTTP request smuggling. Users who may be affected use Twisted Web's HTTP 1.1 server and/or proxy and also pass requests through a different HTTP server and/or proxy. The Twisted Web client is not affected. The HTTP 2.0 server uses a different parser, so it is not affected. The issue has been addressed in Twisted 22.4.0rc1. Two workarounds are available: Ensure any vulnerabilities in upstream proxies have been addressed, such as by upgrading them; or filter malformed requests by other means, such as configuration of an upstream proxy. |
| Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability. |
| runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. A bug was found in runc prior to version 1.1.2 where `runc exec --cap` created processes with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during execve(2). This bug did not affect the container security sandbox as the inheritable set never contained more capabilities than were included in the container's bounding set. This bug has been fixed in runc 1.1.2. This fix changes `runc exec --cap` behavior such that the additional capabilities granted to the process being executed (as specified via `--cap` arguments) do not include inheritable capabilities. In addition, `runc spec` is changed to not set any inheritable capabilities in the created example OCI spec (`config.json`) file. |
| When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. |
| A flaw was found in the Linux kernel. This flaw allows an attacker to crash the Linux kernel by simulating amateur radio from the user space, resulting in a null-ptr-deref vulnerability and a use-after-free vulnerability. |
| Issue summary: Checking excessively long DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_check(), DH_check_ex()
or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long
delays. Where the key or parameters that are being checked have been obtained
from an untrusted source this may lead to a Denial of Service.
The function DH_check() performs various checks on DH parameters. One of those
checks confirms that the modulus ('p' parameter) is not too large. Trying to use
a very large modulus is slow and OpenSSL will not normally use a modulus which
is over 10,000 bits in length.
However the DH_check() function checks numerous aspects of the key or parameters
that have been supplied. Some of those checks use the supplied modulus value
even if it has already been found to be too large.
An application that calls DH_check() and supplies a key or parameters obtained
from an untrusted source could be vulernable to a Denial of Service attack.
The function DH_check() is itself called by a number of other OpenSSL functions.
An application calling any of those other functions may similarly be affected.
The other functions affected by this are DH_check_ex() and
EVP_PKEY_param_check().
Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications
when using the '-check' option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| Issue summary: The AES-SIV cipher implementation contains a bug that causes
it to ignore empty associated data entries which are unauthenticated as
a consequence.
Impact summary: Applications that use the AES-SIV algorithm and want to
authenticate empty data entries as associated data can be misled by removing,
adding or reordering such empty entries as these are ignored by the OpenSSL
implementation. We are currently unaware of any such applications.
The AES-SIV algorithm allows for authentication of multiple associated
data entries along with the encryption. To authenticate empty data the
application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with
NULL pointer as the output buffer and 0 as the input buffer length.
The AES-SIV implementation in OpenSSL just returns success for such a call
instead of performing the associated data authentication operation.
The empty data thus will not be authenticated.
As this issue does not affect non-empty associated data authentication and
we expect it to be rare for an application to use empty associated data
entries this is qualified as Low severity issue. |
| A use-after-free vulnerability was found in the Linux kernel's ext4 filesystem in the way it handled the extra inode size for extended attributes. This flaw could allow a privileged local user to cause a system crash or other undefined behaviors. |
| An out-of-bounds write vulnerability was found in the Linux kernel's SLIMpro I2C device driver. The userspace "data->block[0]" variable was not capped to a number between 0-255 and was used as the size of a memcpy, possibly writing beyond the end of dma_buffer. This flaw could allow a local privileged user to crash the system or potentially achieve code execution. |
| A path traversal vulnerability exists in curl <8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user's home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user. |
| A flaw was found in openvswitch (OVS). When processing an IP packet with protocol 0, OVS will install the datapath flow without the action modifying the IP header. This issue results (for both kernel and userspace datapath) in installing a datapath flow matching all IP protocols (nw_proto is wildcarded) for this flow, but with an incorrect action, possibly causing incorrect handling of other IP packets with a != 0 IP protocol that matches this dp flow. |
| A remote denial of service vulnerability was found in the Linux kernel’s TIPC kernel module. The while loop in tipc_link_xmit() hits an unknown state while attempting to parse SKBs, which are not in the queue. Sending two small UDP packets to a system with a UDP bearer results in the CPU utilization for the system to instantly spike to 100%, causing a denial of service condition. |
| A use-after-free flaw was found in the Linux kernel’s Ext4 File System in how a user triggers several file operations simultaneously with the overlay FS usage. This flaw allows a local user to crash or potentially escalate their privileges on the system. Only if patch 9a2544037600 ("ovl: fix use after free in struct ovl_aio_req") not applied yet, the kernel could be affected. |
| A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| A memory corruption flaw was found in the Linux kernel’s human interface device (HID) subsystem in how a user inserts a malicious USB device. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| Improper Validation of Array Index vulnerability in the spreadsheet component of The Document Foundation LibreOffice allows an attacker to craft a spreadsheet document that will cause an array index underflow when loaded. In the affected versions of LibreOffice certain malformed spreadsheet formulas, such as AGGREGATE, could be created with less parameters passed to the formula interpreter than it expected, leading to an array index underflow, in which case there is a risk that arbitrary code could be executed. This issue affects: The Document Foundation LibreOffice 7.4 versions prior to 7.4.6; 7.5 versions prior to 7.5.1. |
| npm pack ignores root-level .gitignore and .npmignore file exclusion directives when run in a workspace or with a workspace flag (ie. `--workspaces`, `--workspace=<name>`). Anyone who has run `npm pack` or `npm publish` inside a workspace, as of v7.9.0 and v7.13.0 respectively, may be affected and have published files into the npm registry they did not intend to include. Users should upgrade to the latest, patched version of npm v8.11.0, run: npm i -g npm@latest . Node.js versions v16.15.1, v17.19.1, and v18.3.0 include the patched v8.11.0 version of npm. |
| Grafana is an open-source platform for monitoring and observability. Versions prior to 9.1.6 and 8.5.13 are vulnerable to an escalation from admin to server admin when auth proxy is used, allowing an admin to take over the server admin account and gain full control of the grafana instance. All installations should be upgraded as soon as possible. As a workaround deactivate auth proxy following the instructions at: https://grafana.com/docs/grafana/latest/setup-grafana/configure-security/configure-authentication/auth-proxy/ |
| Matrix Javascript SDK is the Matrix Client-Server SDK for JavaScript. Starting with version 17.1.0-rc.1, improperly formed beacon events can disrupt or impede the matrix-js-sdk from functioning properly, potentially impacting the consumer's ability to process data safely. Note that the matrix-js-sdk can appear to be operating normally but be excluding or corrupting runtime data presented to the consumer. This is patched in matrix-js-sdk v19.7.0. Redacting applicable events, waiting for the sync processor to store data, and restarting the client are possible workarounds. Alternatively, redacting the applicable events and clearing all storage will fix the further perceived issues. Downgrading to an unaffected version, noting that such a version may be subject to other vulnerabilities, will additionally resolve the issue. |
| Matrix Javascript SDK is the Matrix Client-Server SDK for JavaScript. Prior to version 19.7.0, an attacker cooperating with a malicious homeserver can construct messages appearing to have come from another person. Such messages will be marked with a grey shield on some platforms, but this may be missing in others. This attack is possible due to the matrix-js-sdk implementing a too permissive key forwarding strategy on the receiving end. Starting with version 19.7.0, the default policy for accepting key forwards has been made more strict in the matrix-js-sdk. matrix-js-sdk will now only accept forwarded keys in response to previously issued requests and only from own, verified devices. The SDK now sets a `trusted` flag on the decrypted message upon decryption, based on whether the key used to decrypt the message was received from a trusted source. Clients need to ensure that messages decrypted with a key with `trusted = false` are decorated appropriately, for example, by showing a warning for such messages. This attack requires coordination between a malicious homeserver and an attacker, and those who trust your homeservers do not need a workaround. |
