Export limit exceeded: 336584 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (336584 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40005 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Implement refcount to handle unbind during busy driver support indirect read and indirect write operation with assumption no force device removal(unbind) operation. However force device removal(removal) is still available to root superuser. Unbinding driver during operation causes kernel crash. This changes ensure driver able to handle such operation for indirect read and indirect write by implementing refcount to track attached devices to the controller and gracefully wait and until attached devices remove operation completed before proceed with removal operation. | ||||
| CVE-2025-39863 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work The brcmf_btcoex_detach() only shuts down the btcoex timer, if the flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which runs as timer handler, sets timer_on to false. This creates critical race conditions: 1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc() is executing, it may observe timer_on as false and skip the call to timer_shutdown_sync(). 2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info worker after the cancel_work_sync() has been executed, resulting in use-after-free bugs. The use-after-free bugs occur in two distinct scenarios, depending on the timing of when the brcmf_btcoex_info struct is freed relative to the execution of its worker thread. Scenario 1: Freed before the worker is scheduled The brcmf_btcoex_info is deallocated before the worker is scheduled. A race condition can occur when schedule_work(&bt_local->work) is called after the target memory has been freed. The sequence of events is detailed below: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | kfree(cfg->btcoex); // FREE | | schedule_work(&bt_local->work); // USE Scenario 2: Freed after the worker is scheduled The brcmf_btcoex_info is freed after the worker has been scheduled but before or during its execution. In this case, statements within the brcmf_btcoex_handler() — such as the container_of macro and subsequent dereferences of the brcmf_btcoex_info object will cause a use-after-free access. The following timeline illustrates this scenario: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | schedule_work(); // Reschedule | kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker /* | btci = container_of(....); // USE The kfree() above could | ... also occur at any point | btci-> // USE during the worker's execution| */ | To resolve the race conditions, drop the conditional check and call timer_shutdown_sync() directly. It can deactivate the timer reliably, regardless of its current state. Once stopped, the timer_on state is then set to false. | ||||
| CVE-2025-39764 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: remove refcounting in expectation dumpers Same pattern as previous patch: do not keep the expectation object alive via refcount, only store a cookie value and then use that as the skip hint for dump resumption. AFAICS this has the same issue as the one resolved in the conntrack dumper, when we do if (!refcount_inc_not_zero(&exp->use)) to increment the refcount, there is a chance that exp == last, which causes a double-increment of the refcount and subsequent memory leak. | ||||
| CVE-2025-39748 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Forget ranges when refining tnum after JSET Syzbot reported a kernel warning due to a range invariant violation on the following BPF program. 0: call bpf_get_netns_cookie 1: if r0 == 0 goto <exit> 2: if r0 & Oxffffffff goto <exit> The issue is on the path where we fall through both jumps. That path is unreachable at runtime: after insn 1, we know r0 != 0, but with the sign extension on the jset, we would only fallthrough insn 2 if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to figure this out, so the verifier walks all branches. The verifier then refines the register bounds using the second condition and we end up with inconsistent bounds on this unreachable path: 1: if r0 == 0 goto <exit> r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff) 2: if r0 & 0xffffffff goto <exit> r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0) r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0) Improving the range refinement for JSET to cover all cases is tricky. We also don't expect many users to rely on JSET given LLVM doesn't generate those instructions. So instead of improving the range refinement for JSETs, Eduard suggested we forget the ranges whenever we're narrowing tnums after a JSET. This patch implements that approach. | ||||
| CVE-2025-38704 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access In the preparation stage of CPU online, if the corresponding the rdp's->nocb_cb_kthread does not exist, will be created, there is a situation where the rdp's rcuop kthreads creation fails, and then de-offload this CPU's rdp, does not assign this CPU's rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and rdp's->rdp_gp->nocb_gp_kthread is still valid. This will cause the subsequent re-offload operation of this offline CPU, which will pass the conditional check and the kthread_unpark() will access invalid rdp's->nocb_cb_kthread pointer. This commit therefore use rdp's->nocb_gp_kthread instead of rdp_gp's->nocb_gp_kthread for safety check. | ||||
| CVE-2025-38659 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: No more self recovery When a node withdraws and it turns out that it is the only node that has the filesystem mounted, gfs2 currently tries to replay the local journal to bring the filesystem back into a consistent state. Not only is that a very bad idea, it has also never worked because gfs2_recover_func() will refuse to do anything during a withdraw. However, before even getting to this point, gfs2_recover_func() dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before commit 04133b607a78 ("gfs2: Prevent double iput for journal on error") and is a NULL pointer dereference since then. Simply get rid of self recovery to fix that. | ||||
| CVE-2025-38627 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org | ||||
| CVE-2025-38626 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode w/ "mode=lfs" mount option, generic/299 will cause system panic as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2835! Call Trace: <TASK> f2fs_allocate_data_block+0x6f4/0xc50 f2fs_map_blocks+0x970/0x1550 f2fs_iomap_begin+0xb2/0x1e0 iomap_iter+0x1d6/0x430 __iomap_dio_rw+0x208/0x9a0 f2fs_file_write_iter+0x6b3/0xfa0 aio_write+0x15d/0x2e0 io_submit_one+0x55e/0xab0 __x64_sys_io_submit+0xa5/0x230 do_syscall_64+0x84/0x2f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0010:new_curseg+0x70f/0x720 The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may trigger foreground gc only if it allocates any physical block, it will be a little bit later when there is multiple threads writing data w/ aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so f2fs_map_blocks() does block allocations aggressively. In order to fix this issue, let's give a chance to trigger foreground gc in prior to block allocation in f2fs_map_blocks(). | ||||
| CVE-2025-38426 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add basic validation for RAS header If RAS header read from EEPROM is corrupted, it could result in trying to allocate huge memory for reading the records. Add some validation to header fields. | ||||
| CVE-2025-38250 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor while its device was being used by iotcl() on another thread. Once the last fd refcnt is released, vhci_release() calls hci_unregister_dev(), hci_free_dev(), and kfree() for struct vhci_data, which is set to hci_dev->dev->driver_data. The problem is that there is no synchronisation after unlinking hdev from hci_dev_list in hci_unregister_dev(). There might be another thread still accessing the hdev which was fetched before the unlink operation. We can use SRCU for such synchronisation. Let's run hci_dev_reset() under SRCU and wait for its completion in hci_unregister_dev(). Another option would be to restore hci_dev->destruct(), which was removed in commit 587ae086f6e4 ("Bluetooth: Remove unused hci-destruct cb"). However, this would not be a good solution, as we should not run hci_unregister_dev() while there are in-flight ioctl() requests, which could lead to another data-race KCSAN splat. Note that other drivers seem to have the same problem, for exmaple, virtbt_remove(). [0]: BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718 CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 skb_queue_purge include/linux/skbuff.h:3368 [inline] vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69 hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline] hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592 sock_do_ioctl+0xd9/0x300 net/socket.c:1190 sock_ioctl+0x576/0x790 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcf5b98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929 RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009 RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528 </TASK> Allocated by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635 misc_open+0x2bc/0x330 drivers/char/misc.c:161 chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414 do_dentry_open+0xdf0/0x1970 fs/open.c:964 vfs_open+0x3b/0x340 fs/open.c:1094 do_open fs/namei.c:3887 [inline] path_openat+0x2ee5/0x3830 fs/name ---truncated--- | ||||
| CVE-2025-38192 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: clear the dst when changing skb protocol A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel NULL pointer dereference, address: 0000000000000000 ip6_rcv_core (net/ipv6/ip6_input.c:190:20) ipv6_rcv (net/ipv6/ip6_input.c:306:8) process_backlog (net/core/dev.c:6186:4) napi_poll (net/core/dev.c:6906:9) net_rx_action (net/core/dev.c:7028:13) do_softirq (kernel/softirq.c:462:3) netif_rx (net/core/dev.c:5326:3) dev_loopback_xmit (net/core/dev.c:4015:2) ip_mc_finish_output (net/ipv4/ip_output.c:363:8) NF_HOOK (./include/linux/netfilter.h:314:9) ip_mc_output (net/ipv4/ip_output.c:400:5) dst_output (./include/net/dst.h:459:9) ip_local_out (net/ipv4/ip_output.c:130:9) ip_send_skb (net/ipv4/ip_output.c:1496:8) udp_send_skb (net/ipv4/udp.c:1040:8) udp_sendmsg (net/ipv4/udp.c:1328:10) The output interface has a 4->6 program attached at ingress. We try to loop the multicast skb back to the sending socket. Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr and changes skb->protocol to v6. We enter ip6_rcv_core which tries to use skb_dst(). But the dst is still an IPv4 one left after IPv4 mcast output. Clear the dst in all BPF helpers which change the protocol. Try to preserve metadata dsts, those may carry non-routing metadata. | ||||
| CVE-2025-38164 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid inconsistence in between SIT and SSA w/ below testcase, it will cause inconsistence in between SIT and SSA. create_null_blk 512 2 1024 1024 mkfs.f2fs -m /dev/nullb0 mount /dev/nullb0 /mnt/f2fs/ touch /mnt/f2fs/file f2fs_io pinfile set /mnt/f2fs/file fallocate -l 4GiB /mnt/f2fs/file F2FS-fs (nullb0): Inconsistent segment (0) type [1, 0] in SSA and SIT CPU: 5 UID: 0 PID: 2398 Comm: fallocate Tainted: G O 6.13.0-rc1 #84 Tainted: [O]=OOT_MODULE Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: <TASK> dump_stack_lvl+0xb3/0xd0 dump_stack+0x14/0x20 f2fs_handle_critical_error+0x18c/0x220 [f2fs] f2fs_stop_checkpoint+0x38/0x50 [f2fs] do_garbage_collect+0x674/0x6e0 [f2fs] f2fs_gc_range+0x12b/0x230 [f2fs] f2fs_allocate_pinning_section+0x5c/0x150 [f2fs] f2fs_expand_inode_data+0x1cc/0x3c0 [f2fs] f2fs_fallocate+0x3c3/0x410 [f2fs] vfs_fallocate+0x15f/0x4b0 __x64_sys_fallocate+0x4a/0x80 x64_sys_call+0x15e8/0x1b80 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f9dba5197ca F2FS-fs (nullb0): Stopped filesystem due to reason: 4 The reason is f2fs_gc_range() may try to migrate block in curseg, however, its SSA block is not uptodate due to the last summary block data is still in cache of curseg. In this patch, we add a condition in f2fs_gc_range() to check whether section is opened or not, and skip block migration for opened section. | ||||
| CVE-2025-38162 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: prevent overflow in lookup table allocation When calculating the lookup table size, ensure the following multiplication does not overflow: - desc->field_len[] maximum value is U8_MAX multiplied by NFT_PIPAPO_GROUPS_PER_BYTE(f) that can be 2, worst case. - NFT_PIPAPO_BUCKETS(f->bb) is 2^8, worst case. - sizeof(unsigned long), from sizeof(*f->lt), lt in struct nft_pipapo_field. Then, use check_mul_overflow() to multiply by bucket size and then use check_add_overflow() to the alignment for avx2 (if needed). Finally, add lt_size_check_overflow() helper and use it to consolidate this. While at it, replace leftover allocation using the GFP_KERNEL to GFP_KERNEL_ACCOUNT for consistency, in pipapo_resize(). | ||||
| CVE-2025-38105 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill timer properly at removal The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer. For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too. | ||||
| CVE-2025-21682 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: always recalculate features after XDP clearing, fix null-deref Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues. | ||||
| CVE-2025-21676 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. | ||||
| CVE-2024-56719 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO DMA API usage causing oops Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s members to be later in stmmac_tso_xmit(). The buf (dma cookie) and len stored in this structure are passed to dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that the dma cookie passed to dma_unmap_single() is the same as the value returned from dma_map_single(). However, by moving the assignment later, this is not the case when priv->dma_cap.addr64 > 32 as "des" is offset by proto_hdr_len. This causes problems such as: dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed and with DMA_API_DEBUG enabled: DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes] Fix this by maintaining "des" as the original DMA cookie, and use tso_des to pass the offset DMA cookie to stmmac_tso_allocator(). Full details of the crashes can be found at: https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/ https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ | ||||
| CVE-2024-50298 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8 | ||||
| CVE-2024-49998 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up). | ||||
| CVE-2024-49979 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: gso: fix tcp fraglist segmentation after pull from frag_list Detect tcp gso fraglist skbs with corrupted geometry (see below) and pass these to skb_segment instead of skb_segment_list, as the first can segment them correctly. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify these skbs, breaking these invariants. In extreme cases they pull all data into skb linear. For TCP, this causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at tcp_hdr(seg->next). Detect invalid geometry due to pull, by checking head_skb size. Don't just drop, as this may blackhole a destination. Convert to be able to pass to regular skb_segment. Approach and description based on a patch by Willem de Bruijn. | ||||