Export limit exceeded: 16262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54245 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds When we run syzkaller we get below Out of Bound. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: dump_backtrace+0x0/0x4c8 show_stack+0x34/0x44 dump_stack_lvl+0xd8/0x118 print_address_description+0x30/0x2d8 kasan_report+0x158/0x198 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf4/0x180 _regmap_read+0xc4/0x278 _regmap_update_bits+0x130/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_digital_mute+0xec/0x140 Actually There is no need to have decimator with 32 bits. By limiting the variable with short type u8 issue is resolved. | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2023-54242 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: Fix division by zero error on zero wsum When the weighted sum is zero the calculation of limit causes a division by zero error. Fix this by continuing to the next level. This was discovered by running as root: stress-ng --ioprio 0 Fixes divison by error oops: [ 521.450556] divide error: 0000 [#1] SMP NOPTI [ 521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1 [ 521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400 [ 521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44 [ 521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046 [ 521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000 [ 521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978 [ 521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0 [ 521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18 [ 521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970 [ 521.454549] FS: 00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000 [ 521.454912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0 [ 521.455491] PKRU: 55555554 [ 521.455619] Call Trace: [ 521.455736] <TASK> [ 521.455837] ? bfq_request_merge+0x3a/0xc0 [ 521.456027] ? elv_merge+0x115/0x140 [ 521.456191] bfq_limit_depth+0xc8/0x240 [ 521.456366] __blk_mq_alloc_requests+0x21a/0x2c0 [ 521.456577] blk_mq_submit_bio+0x23c/0x6c0 [ 521.456766] __submit_bio+0xb8/0x140 [ 521.457236] submit_bio_noacct_nocheck+0x212/0x300 [ 521.457748] submit_bio_noacct+0x1a6/0x580 [ 521.458220] submit_bio+0x43/0x80 [ 521.458660] ext4_io_submit+0x23/0x80 [ 521.459116] ext4_do_writepages+0x40a/0xd00 [ 521.459596] ext4_writepages+0x65/0x100 [ 521.460050] do_writepages+0xb7/0x1c0 [ 521.460492] __filemap_fdatawrite_range+0xa6/0x100 [ 521.460979] file_write_and_wait_range+0xbf/0x140 [ 521.461452] ext4_sync_file+0x105/0x340 [ 521.461882] __x64_sys_fsync+0x67/0x100 [ 521.462305] ? syscall_exit_to_user_mode+0x2c/0x1c0 [ 521.462768] do_syscall_64+0x3b/0xc0 [ 521.463165] entry_SYSCALL_64_after_hwframe+0x5a/0xc4 [ 521.463621] RIP: 0033:0x5640b6c56590 [ 521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c | ||||
| CVE-2023-54233 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: avoid a NULL dereference with unsupported widgets If an IPC4 topology contains an unsupported widget, its .module_info field won't be set, then sof_ipc4_route_setup() will cause a kernel Oops trying to dereference it. Add a check for such cases. | ||||
| CVE-2023-54232 | 1 Linux | 1 Linux Kernel | 2026-01-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: Only force 030 bus error if PC not in exception table __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. | ||||
| CVE-2023-54229 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range Because of what seems to be a typo, a 6Ghz-only phy for which the BDF does not allow the 7115Mhz channel will fail to register: WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954 Modules linked in: ath11k_pci sbsa_gwdt CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9 Hardware name: Freebox V7R Board (DT) Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : wiphy_register+0x914/0x954 lr : ieee80211_register_hw+0x67c/0xc10 sp : ffffff800b123aa0 x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418 x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168 x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014 x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718 x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006 x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284 x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: wiphy_register+0x914/0x954 ieee80211_register_hw+0x67c/0xc10 ath11k_mac_register+0x7c4/0xe10 ath11k_core_qmi_firmware_ready+0x1f4/0x570 ath11k_qmi_driver_event_work+0x198/0x590 process_one_work+0x1b8/0x328 worker_thread+0x6c/0x414 kthread+0x100/0x104 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22 ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22 ath11k_pci 0002:01:00.0: failed to create pdev core: -22 | ||||
| CVE-2023-54227 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix tags leak when shrink nr_hw_queues Although we don't need to realloc set->tags[] when shrink nr_hw_queues, we need to free them. Or these tags will be leaked. How to reproduce: 1. mount -t configfs configfs /mnt 2. modprobe null_blk nr_devices=0 submit_queues=8 3. mkdir /mnt/nullb/nullb0 4. echo 1 > /mnt/nullb/nullb0/power 5. echo 4 > /mnt/nullb/nullb0/submit_queues 6. rmdir /mnt/nullb/nullb0 In step 4, will alloc 9 tags (8 submit queues and 1 poll queue), then in step 5, new_nr_hw_queues = 5 (4 submit queues and 1 poll queue). At last in step 6, only these 5 tags are freed, the other 4 tags leaked. | ||||
| CVE-2023-54213 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: sisusbvga: Add endpoint checks The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints. | ||||
| CVE-2023-54198 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: fix out-of-bounds access in tty_driver_lookup_tty() When specifying an invalid console= device like console=tty3270, tty_driver_lookup_tty() returns the tty struct without checking whether index is a valid number. To reproduce: qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \ -kernel ../linux-build-x86/arch/x86/boot/bzImage \ -append "console=ttyS0 console=tty3270" This crashes with: [ 0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef [ 0.771265] #PF: supervisor read access in kernel mode [ 0.771773] #PF: error_code(0x0000) - not-present page [ 0.772609] Oops: 0000 [#1] PREEMPT SMP PTI [ 0.774878] RIP: 0010:tty_open+0x268/0x6f0 [ 0.784013] chrdev_open+0xbd/0x230 [ 0.784444] ? cdev_device_add+0x80/0x80 [ 0.784920] do_dentry_open+0x1e0/0x410 [ 0.785389] path_openat+0xca9/0x1050 [ 0.785813] do_filp_open+0xaa/0x150 [ 0.786240] file_open_name+0x133/0x1b0 [ 0.786746] filp_open+0x27/0x50 [ 0.787244] console_on_rootfs+0x14/0x4d [ 0.787800] kernel_init_freeable+0x1e4/0x20d [ 0.788383] ? rest_init+0xc0/0xc0 [ 0.788881] kernel_init+0x11/0x120 [ 0.789356] ret_from_fork+0x22/0x30 | ||||
| CVE-2023-54177 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: quota: fix warning in dqgrab() There's issue as follows when do fault injection: WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0 Modules linked in: CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541 RIP: 0010:dquot_disable+0x13b7/0x18c0 RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980 RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002 RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130 R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118 FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dquot_load_quota_sb+0xd53/0x1060 dquot_resume+0x172/0x230 ext4_reconfigure+0x1dc6/0x27b0 reconfigure_super+0x515/0xa90 __x64_sys_fsconfig+0xb19/0xd20 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue may happens as follows: ProcessA ProcessB ProcessC sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_suspend -> suspend all type quota sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_resume ret = dquot_load_quota_sb add_dquot_ref do_open -> open file O_RDWR vfs_open do_dentry_open get_write_access atomic_inc_unless_negative(&inode->i_writecount) ext4_file_open dquot_file_open dquot_initialize __dquot_initialize dqget atomic_inc(&dquot->dq_count); __dquot_initialize __dquot_initialize dqget if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) ext4_acquire_dquot -> Return error DQ_ACTIVE_B flag isn't set dquot_disable invalidate_dquots if (atomic_read(&dquot->dq_count)) dqgrab WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) -> Trigger warning In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when dqgrab(). To solve above issue just replace the dqgrab() use in invalidate_dquots() with atomic_inc(&dquot->dq_count). | ||||
| CVE-2024-57838 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/entry: Mark IRQ entries to fix stack depot warnings The stack depot filters out everything outside of the top interrupt context as an uninteresting or irrelevant part of the stack traces. This helps with stack trace de-duplication, avoiding an explosion of saved stack traces that share the same IRQ context code path but originate from different randomly interrupted points, eventually exhausting the stack depot. Filtering uses in_irqentry_text() to identify functions within the .irqentry.text and .softirqentry.text sections, which then become the last stack trace entries being saved. While __do_softirq() is placed into the .softirqentry.text section by common code, populating .irqentry.text is architecture-specific. Currently, the .irqentry.text section on s390 is empty, which prevents stack depot filtering and de-duplication and could result in warnings like: Stack depot reached limit capacity WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8 with PREEMPT and KASAN enabled. Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into the .irqentry.text section and updating the kprobes blacklist to include the .irqentry.text section. This is done only for asynchronous interrupts and explicitly not for program checks, which are synchronous and where the context beyond the program check is important to preserve. Despite machine checks being somewhat in between, they are extremely rare, and preserving context when possible is also of value. SVCs and Restart Interrupts are not relevant, one being always at the boundary to user space and the other being a one-time thing. IRQ entries filtering is also optionally used in ftrace function graph, where the same logic applies. | ||||
| CVE-2024-48875 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't take dev_replace rwsem on task already holding it Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of the RAID stripe-tree, we get the following splat from lockdep: BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started ============================================ WARNING: possible recursive locking detected 6.11.0-rc3-btrfs-for-next #599 Not tainted -------------------------------------------- btrfs/2326 is trying to acquire lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 but task is already holding lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&fs_info->dev_replace.rwsem); lock(&fs_info->dev_replace.rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by btrfs/2326: #0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 stack backtrace: CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x5b/0x80 __lock_acquire+0x2798/0x69d0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x19d/0x4a0 ? btrfs_map_block+0x39f/0x2250 ? __pfx_lock_acquire+0x10/0x10 ? find_held_lock+0x2d/0x110 ? lock_is_held_type+0x8f/0x100 down_read+0x8e/0x440 ? btrfs_map_block+0x39f/0x2250 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x39f/0x2250 ? btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? btrfs_bio_counter_inc_blocked+0xd9/0x2e0 ? __kasan_slab_alloc+0x6e/0x70 ? __pfx_btrfs_map_block+0x10/0x10 ? __pfx_btrfs_bio_counter_inc_blocked+0x10/0x10 ? kmem_cache_alloc_noprof+0x1f2/0x300 ? mempool_alloc_noprof+0xed/0x2b0 btrfs_submit_chunk+0x28d/0x17e0 ? __pfx_btrfs_submit_chunk+0x10/0x10 ? bvec_alloc+0xd7/0x1b0 ? bio_add_folio+0x171/0x270 ? __pfx_bio_add_folio+0x10/0x10 ? __kasan_check_read+0x20/0x20 btrfs_submit_bio+0x37/0x80 read_extent_buffer_pages+0x3df/0x6c0 btrfs_read_extent_buffer+0x13e/0x5f0 read_tree_block+0x81/0xe0 read_block_for_search+0x4bd/0x7a0 ? __pfx_read_block_for_search+0x10/0x10 btrfs_search_slot+0x78d/0x2720 ? __pfx_btrfs_search_slot+0x10/0x10 ? lock_is_held_type+0x8f/0x100 ? kasan_save_track+0x14/0x30 ? __kasan_slab_alloc+0x6e/0x70 ? kmem_cache_alloc_noprof+0x1f2/0x300 btrfs_get_raid_extent_offset+0x181/0x820 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_btrfs_get_raid_extent_offset+0x10/0x10 ? down_read+0x194/0x440 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x5b5/0x2250 ? __pfx_btrfs_map_block+0x10/0x10 scrub_submit_initial_read+0x8fe/0x11b0 ? __pfx_scrub_submit_initial_read+0x10/0x10 submit_initial_group_read+0x161/0x3a0 ? lock_release+0x20e/0x710 ? __pfx_submit_initial_group_read+0x10/0x10 ? __pfx_lock_release+0x10/0x10 scrub_simple_mirror.isra.0+0x3eb/0x580 scrub_stripe+0xe4d/0x1440 ? lock_release+0x20e/0x710 ? __pfx_scrub_stripe+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 scrub_chunk+0x257/0x4a0 scrub_enumerate_chunks+0x64c/0xf70 ? __mutex_unlock_slowpath+0x147/0x5f0 ? __pfx_scrub_enumerate_chunks+0x10/0x10 ? bit_wait_timeout+0xb0/0x170 ? __up_read+0x189/0x700 ? scrub_workers_get+0x231/0x300 ? up_write+0x490/0x4f0 btrfs_scrub_dev+0x52e/0xcd0 ? create_pending_snapshots+0x230/0x250 ? __pfx_btrfs_scrub_dev+0x10/0x10 btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? lock_acquire+0x19d/0x4a0 ? __pfx_btrfs_dev_replace_by_ioctl+0x10/0x10 ? ---truncated--- | ||||
| CVE-2023-53339 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix BUG_ON condition in btrfs_cancel_balance Pausing and canceling balance can race to interrupt balance lead to BUG_ON panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance does not take this race scenario into account. However, the race condition has no other side effects. We can fix that. Reproducing it with panic trace like this: kernel BUG at fs/btrfs/volumes.c:4618! RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0 Call Trace: <TASK> ? do_nanosleep+0x60/0x120 ? hrtimer_nanosleep+0xb7/0x1a0 ? sched_core_clone_cookie+0x70/0x70 btrfs_ioctl_balance_ctl+0x55/0x70 btrfs_ioctl+0xa46/0xd20 __x64_sys_ioctl+0x7d/0xa0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Race scenario as follows: > mutex_unlock(&fs_info->balance_mutex); > -------------------- > .......issue pause and cancel req in another thread > -------------------- > ret = __btrfs_balance(fs_info); > > mutex_lock(&fs_info->balance_mutex); > if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) { > btrfs_info(fs_info, "balance: paused"); > btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED); > } | ||||
| CVE-2023-53246 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL When compiled with CONFIG_CIFS_DFS_UPCALL disabled, cifs_dfs_d_automount is NULL. cifs.ko logic for mapping CIFS_FATTR_DFS_REFERRAL attributes to S_AUTOMOUNT and corresponding dentry flags is retained regardless of CONFIG_CIFS_DFS_UPCALL, leading to a NULL pointer dereference in VFS follow_automount() when traversing a DFS referral link: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> __traverse_mounts+0xb5/0x220 ? cifs_revalidate_mapping+0x65/0xc0 [cifs] step_into+0x195/0x610 ? lookup_fast+0xe2/0xf0 path_lookupat+0x64/0x140 filename_lookup+0xc2/0x140 ? __create_object+0x299/0x380 ? kmem_cache_alloc+0x119/0x220 ? user_path_at_empty+0x31/0x50 user_path_at_empty+0x31/0x50 __x64_sys_chdir+0x2a/0xd0 ? exit_to_user_mode_prepare+0xca/0x100 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc This fix adds an inline cifs_dfs_d_automount() {return -EREMOTE} handler when CONFIG_CIFS_DFS_UPCALL is disabled. An alternative would be to avoid flagging S_AUTOMOUNT, etc. without CONFIG_CIFS_DFS_UPCALL. This approach was chosen as it provides more control over the error path. | ||||
| CVE-2023-52832 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't return unset power in ieee80211_get_tx_power() We can get a UBSAN warning if ieee80211_get_tx_power() returns the INT_MIN value mac80211 internally uses for "unset power level". UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5 -2147483648 * 100 cannot be represented in type 'int' CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE Call Trace: dump_stack+0x74/0x92 ubsan_epilogue+0x9/0x50 handle_overflow+0x8d/0xd0 __ubsan_handle_mul_overflow+0xe/0x10 nl80211_send_iface+0x688/0x6b0 [cfg80211] [...] cfg80211_register_wdev+0x78/0xb0 [cfg80211] cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211] [...] ieee80211_if_add+0x60e/0x8f0 [mac80211] ieee80211_register_hw+0xda5/0x1170 [mac80211] In this case, simply return an error instead, to indicate that no data is available. | ||||
| CVE-2023-52476 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/lbr: Filter vsyscall addresses We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. | ||||
| CVE-2024-58090 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_console_sem() was invoked with interrupts enabled. Further instrumentation revealed that in the interrupt disabled section of kexec jump one of the syscore_suspend() callbacks woke up a task, which set the NEED_RESCHED flag. A later callback in the resume path invoked cond_resched() which in turn led to the invocation of the scheduler: __cond_resched+0x21/0x60 down_timeout+0x18/0x60 acpi_os_wait_semaphore+0x4c/0x80 acpi_ut_acquire_mutex+0x3d/0x100 acpi_ns_get_node+0x27/0x60 acpi_ns_evaluate+0x1cb/0x2d0 acpi_rs_set_srs_method_data+0x156/0x190 acpi_pci_link_set+0x11c/0x290 irqrouter_resume+0x54/0x60 syscore_resume+0x6a/0x200 kernel_kexec+0x145/0x1c0 __do_sys_reboot+0xeb/0x240 do_syscall_64+0x95/0x180 This is a long standing problem, which probably got more visible with the recent printk changes. Something does a task wakeup and the scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and invokes schedule() from a completely bogus context. The scheduler enables interrupts after context switching, which causes the above warning at the end. Quite some of the code paths in syscore_suspend()/resume() can result in triggering a wakeup with the exactly same consequences. They might not have done so yet, but as they share a lot of code with normal operations it's just a question of time. The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling models. Full preemption is not affected as cond_resched() is disabled and the preemption check preemptible() takes the interrupt disabled flag into account. Cure the problem by adding a corresponding check into cond_resched(). | ||||
| CVE-2024-58085 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tomoyo: don't emit warning in tomoyo_write_control() syzbot is reporting too large allocation warning at tomoyo_write_control(), for one can write a very very long line without new line character. To fix this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE, for practically a valid line should be always shorter than 32KB where the "too small to fail" memory-allocation rule applies. One might try to write a valid line that is longer than 32KB, but such request will likely fail with -ENOMEM. Therefore, I feel that separately returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant. There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE. | ||||
| CVE-2024-58001 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: handle a symlink read error correctly Patch series "Convert ocfs2 to use folios". Mark did a conversion of ocfs2 to use folios and sent it to me as a giant patch for review ;-) So I've redone it as individual patches, and credited Mark for the patches where his code is substantially the same. It's not a bad way to do it; his patch had some bugs and my patches had some bugs. Hopefully all our bugs were different from each other. And hopefully Mark likes all the changes I made to his code! This patch (of 23): If we can't read the buffer, be sure to unlock the page before returning. | ||||
| CVE-2024-57976 | 1 Linux | 1 Linux Kernel | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when cow_file_range() failed [BUG] When testing with COW fixup marked as BUG_ON() (this is involved with the new pin_user_pages*() change, which should not result new out-of-band dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW fixup path. This BUG_ON() happens just after a failed btrfs_run_delalloc_range(): BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1444! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : extent_writepage_io+0x2d4/0x308 [btrfs] lr : extent_writepage_io+0x2d4/0x308 [btrfs] Call trace: extent_writepage_io+0x2d4/0x308 [btrfs] extent_writepage+0x218/0x330 [btrfs] extent_write_cache_pages+0x1d4/0x4b0 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x180/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] That failure is mostly from cow_file_range(), where we can hit -ENOSPC. Although the -ENOSPC is already a bug related to our space reservation code, let's just focus on the error handling. For example, we have the following dirty range [0, 64K) of an inode, with 4K sector size and 4K page size: 0 16K 32K 48K 64K |///////////////////////////////////////| |#######################################| Where |///| means page are still dirty, and |###| means the extent io tree has EXTENT_DELALLOC flag. - Enter extent_writepage() for page 0 - Enter btrfs_run_delalloc_range() for range [0, 64K) - Enter cow_file_range() for range [0, 64K) - Function btrfs_reserve_extent() only reserved one 16K extent So we created extent map and ordered extent for range [0, 16K) 0 16K 32K 48K 64K |////////|//////////////////////////////| |<- OE ->|##############################| And range [0, 16K) has its delalloc flag cleared. But since we haven't yet submit any bio, involved 4 pages are still dirty. - Function btrfs_reserve_extent() returns with -ENOSPC Now we have to run error cleanup, which will clear all EXTENT_DELALLOC* flags and clear the dirty flags for the remaining ranges: 0 16K 32K 48K 64K |////////| | | | | Note that range [0, 16K) still has its pages dirty. - Some time later, writeback is triggered again for the range [0, 16K) since the page range still has dirty flags. - btrfs_run_delalloc_range() will do nothing because there is no EXTENT_DELALLOC flag. - extent_writepage_io() finds page 0 has no ordered flag Which falls into the COW fixup path, triggering the BUG_ON(). Unfortunately this error handling bug dates back to the introduction of btrfs. Thankfully with the abuse of COW fixup, at least it won't crash the kernel. [FIX] Instead of immediately unlocking the extent and folios, we keep the extent and folios locked until either erroring out or the whole delalloc range finished. When the whole delalloc range finished without error, we just unlock the whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked cases) ---truncated--- | ||||