Export limit exceeded: 16241 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16241 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-36956 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Free all thermal zone debug memory on zone removal Because thermal_debug_tz_remove() does not free all memory allocated for thermal zone diagnostics, some of that memory becomes unreachable after freeing the thermal zone's struct thermal_debugfs object. Address this by making thermal_debug_tz_remove() free all of the memory in question. Cc :6.8+ <stable@vger.kernel.org> # 6.8+ | ||||
| CVE-2024-36920 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Avoid memcpy field-spanning write WARNING When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver prints this WARNING message: memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1) WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr] The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8 replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended to be a flexible length array, so the WARN is a false positive. To suppress the WARN, remove the constant number '1' from the array declaration and clarify that it has flexible length. Also, adjust the memory allocation size to match the change. | ||||
| CVE-2024-36922 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: read txq->read_ptr under lock If we read txq->read_ptr without lock, we can read the same value twice, then obtain the lock, and reclaim from there to two different places, but crucially reclaim the same entry twice, resulting in the WARN_ONCE() a little later. Fix that by reading txq->read_ptr under lock. | ||||
| CVE-2023-40551 | 2 Fedoraproject, Redhat | 7 Fedora, Enterprise Linux, Rhel Aus and 4 more | 2025-10-01 | 5.1 Medium |
| A flaw was found in the MZ binary format in Shim. An out-of-bounds read may occur, leading to a crash or possible exposure of sensitive data during the system's boot phase. | ||||
| CVE-2023-40550 | 2 Fedoraproject, Redhat | 7 Fedora, Enterprise Linux, Rhel Aus and 4 more | 2025-10-01 | 5.5 Medium |
| An out-of-bounds read flaw was found in Shim when it tried to validate the SBAT information. This issue may expose sensitive data during the system's boot phase. | ||||
| CVE-2023-40549 | 2 Fedoraproject, Redhat | 7 Fedora, Enterprise Linux, Rhel Aus and 4 more | 2025-10-01 | 6.2 Medium |
| An out-of-bounds read flaw was found in Shim due to the lack of proper boundary verification during the load of a PE binary. This flaw allows an attacker to load a crafted PE binary, triggering the issue and crashing Shim, resulting in a denial of service. | ||||
| CVE-2023-40548 | 2 Fedoraproject, Redhat | 7 Fedora, Enterprise Linux, Rhel Aus and 4 more | 2025-10-01 | 7.4 High |
| A buffer overflow was found in Shim in the 32-bit system. The overflow happens due to an addition operation involving a user-controlled value parsed from the PE binary being used by Shim. This value is further used for memory allocation operations, leading to a heap-based buffer overflow. This flaw causes memory corruption and can lead to a crash or data integrity issues during the boot phase. | ||||
| CVE-2023-40546 | 2 Fedoraproject, Redhat | 7 Fedora, Enterprise Linux, Rhel Aus and 4 more | 2025-10-01 | 6.2 Medium |
| A flaw was found in Shim when an error happened while creating a new ESL variable. If Shim fails to create the new variable, it tries to print an error message to the user; however, the number of parameters used by the logging function doesn't match the format string used by it, leading to a crash under certain circumstances. | ||||
| CVE-2024-9050 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2025-10-01 | 7.8 High |
| A flaw was found in the libreswan client plugin for NetworkManager (NetkworkManager-libreswan), where it fails to properly sanitize the VPN configuration from the local unprivileged user. In this configuration, composed by a key-value format, the plugin fails to escape special characters, leading the application to interpret values as keys. One of the most critical parameters that could be abused by a malicious user is the `leftupdown`key. This key takes an executable command as a value and is used to specify what executes as a callback in NetworkManager-libreswan to retrieve configuration settings back to NetworkManager. As NetworkManager uses Polkit to allow an unprivileged user to control the system's network configuration, a malicious actor could achieve local privilege escalation and potential code execution as root in the targeted machine by creating a malicious configuration. | ||||
| CVE-2024-5564 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2025-10-01 | 8.1 High |
| A vulnerability was found in libndp. This flaw allows a local malicious user to cause a buffer overflow in NetworkManager, triggered by sending a malformed IPv6 router advertisement packet. This issue occurred as libndp was not correctly validating the route length information. | ||||
| CVE-2023-5557 | 2 Gnome, Redhat | 6 Tracker Miners, Enterprise Linux, Rhel Aus and 3 more | 2025-10-01 | 7.5 High |
| A flaw was found in the tracker-miners package. A weakness in the sandbox allows a maliciously-crafted file to execute code outside the sandbox if the tracker-extract process has first been compromised by a separate vulnerability. | ||||
| CVE-2023-3972 | 1 Redhat | 23 Enterprise Linux, Enterprise Linux Aus, Enterprise Linux Desktop and 20 more | 2025-10-01 | 7.8 High |
| A vulnerability was found in insights-client. This security issue occurs because of insecure file operations or unsafe handling of temporary files and directories that lead to local privilege escalation. Before the insights-client has been registered on the system by root, an unprivileged local user or attacker could create the /var/tmp/insights-client directory (owning the directory with read, write, and execute permissions) on the system. After the insights-client is registered by root, an attacker could then control the directory content that insights are using by putting malicious scripts into it and executing arbitrary code as root (trivially bypassing SELinux protections because insights processes are allowed to disable SELinux system-wide). | ||||
| CVE-2024-10306 | 1 Redhat | 4 Enterprise Linux, Jboss Core Services, Rhel Eus and 1 more | 2025-10-01 | 5.4 Medium |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. | ||||
| CVE-2024-36880 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: add missing firmware sanity checks Add the missing sanity checks when parsing the firmware files before downloading them to avoid accessing and corrupting memory beyond the vmalloced buffer. | ||||
| CVE-2025-21614 | 2 Go-git Project, Redhat | 8 Go-git, Advanced Cluster Security, Enterprise Linux and 5 more | 2025-09-30 | 7.5 High |
| go-git is a highly extensible git implementation library written in pure Go. A denial of service (DoS) vulnerability was discovered in go-git versions prior to v5.13. This vulnerability allows an attacker to perform denial of service attacks by providing specially crafted responses from a Git server which triggers resource exhaustion in go-git clients. Users running versions of go-git from v4 and above are recommended to upgrade to v5.13 in order to mitigate this vulnerability. | ||||
| CVE-2025-40907 | 2 Fastcgi, Redhat | 7 Fcgi, Enterprise Linux, Rhel Aus and 4 more | 2025-09-29 | 5.3 Medium |
| FCGI versions 0.44 through 0.82, for Perl, include a vulnerable version of the FastCGI fcgi2 (aka fcgi) library. The included FastCGI library is affected by CVE-2025-23016, causing an integer overflow (and resultant heap-based buffer overflow) via crafted nameLen or valueLen values in data to the IPC socket. This occurs in ReadParams in fcgiapp.c. | ||||
| CVE-2022-48738 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Reject out of bounds values in snd_soc_put_volsw() We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. | ||||
| CVE-2022-48765 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: LAPIC: Also cancel preemption timer during SET_LAPIC The below warning is splatting during guest reboot. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1931 at arch/x86/kvm/x86.c:10322 kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] CPU: 0 PID: 1931 Comm: qemu-system-x86 Tainted: G I 5.17.0-rc1+ #5 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] Call Trace: <TASK> kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd39797350b This can be triggered by not exposing tsc-deadline mode and doing a reboot in the guest. The lapic_shutdown() function which is called in sys_reboot path will not disarm the flying timer, it just masks LVTT. lapic_shutdown() clears APIC state w/ LVT_MASKED and timer-mode bit is 0, this can trigger timer-mode switch between tsc-deadline and oneshot/periodic, which can result in preemption timer be cancelled in apic_update_lvtt(). However, We can't depend on this when not exposing tsc-deadline mode and oneshot/periodic modes emulated by preemption timer. Qemu will synchronise states around reset, let's cancel preemption timer under KVM_SET_LAPIC. | ||||
| CVE-2024-31076 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline The absence of IRQD_MOVE_PCNTXT prevents immediate effectiveness of interrupt affinity reconfiguration via procfs. Instead, the change is deferred until the next instance of the interrupt being triggered on the original CPU. When the interrupt next triggers on the original CPU, the new affinity is enforced within __irq_move_irq(). A vector is allocated from the new CPU, but the old vector on the original CPU remains and is not immediately reclaimed. Instead, apicd->move_in_progress is flagged, and the reclaiming process is delayed until the next trigger of the interrupt on the new CPU. Upon the subsequent triggering of the interrupt on the new CPU, irq_complete_move() adds a task to the old CPU's vector_cleanup list if it remains online. Subsequently, the timer on the old CPU iterates over its vector_cleanup list, reclaiming old vectors. However, a rare scenario arises if the old CPU is outgoing before the interrupt triggers again on the new CPU. In that case irq_force_complete_move() is not invoked on the outgoing CPU to reclaim the old apicd->prev_vector because the interrupt isn't currently affine to the outgoing CPU, and irq_needs_fixup() returns false. Even though __vector_schedule_cleanup() is later called on the new CPU, it doesn't reclaim apicd->prev_vector; instead, it simply resets both apicd->move_in_progress and apicd->prev_vector to 0. As a result, the vector remains unreclaimed in vector_matrix, leading to a CPU vector leak. To address this issue, move the invocation of irq_force_complete_move() before the irq_needs_fixup() call to reclaim apicd->prev_vector, if the interrupt is currently or used to be affine to the outgoing CPU. Additionally, reclaim the vector in __vector_schedule_cleanup() as well, following a warning message, although theoretically it should never see apicd->move_in_progress with apicd->prev_cpu pointing to an offline CPU. | ||||
| CVE-2024-36010 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igb: Fix string truncation warnings in igb_set_fw_version Commit 1978d3ead82c ("intel: fix string truncation warnings") fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf. drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32 kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fix this warning by using a larger space for adapter->fw_version, and then fall back and continue to use snprintf. | ||||