Export limit exceeded: 334477 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (334477 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23262 | 1 Linux | 1 Linux Kernel | 2026-03-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gve: Fix stats report corruption on queue count change The driver and the NIC share a region in memory for stats reporting. The NIC calculates its offset into this region based on the total size of the stats region and the size of the NIC's stats. When the number of queues is changed, the driver's stats region is resized. If the queue count is increased, the NIC can write past the end of the allocated stats region, causing memory corruption. If the queue count is decreased, there is a gap between the driver and NIC stats, leading to incorrect stats reporting. This change fixes the issue by allocating stats region with maximum size, and the offset calculation for NIC stats is changed to match with the calculation of the NIC. | ||||
| CVE-2026-23263 | 1 Linux | 1 Linux Kernel | 2026-03-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix page array leak d9f595b9a65e ("io_uring/zcrx: fix leaking pages on sg init fail") fixed a page leakage but didn't free the page array, release it as well. | ||||
| CVE-2026-23264 | 1 Linux | 1 Linux Kernel | 2026-03-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem" This reverts commit 7294863a6f01248d72b61d38478978d638641bee. This commit was erroneously applied again after commit 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device") removed it, leading to very hard to debug crashes, when used with a system with two AMD GPUs of which only one supports ASPM. (cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080) | ||||
| CVE-2026-23266 | 1 Linux | 1 Linux Kernel | 2026-03-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: rivafb: fix divide error in nv3_arb() A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 | ||||
| CVE-2026-23267 | 1 Linux | 1 Linux Kernel | 2026-03-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes During SPO tests, when mounting F2FS, an -EINVAL error was returned from f2fs_recover_inode_page. The issue occurred under the following scenario Thread A Thread B f2fs_ioc_commit_atomic_write - f2fs_do_sync_file // atomic = true - f2fs_fsync_node_pages : last_folio = inode folio : schedule before folio_lock(last_folio) f2fs_write_checkpoint - block_operations// writeback last_folio - schedule before f2fs_flush_nat_entries : set_fsync_mark(last_folio, 1) : set_dentry_mark(last_folio, 1) : folio_mark_dirty(last_folio) - __write_node_folio(last_folio) : f2fs_down_read(&sbi->node_write)//block - f2fs_flush_nat_entries : {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED) - unblock_operations : f2fs_up_write(&sbi->node_write) f2fs_write_checkpoint//return : f2fs_do_write_node_page() f2fs_ioc_commit_atomic_write//return SPO Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has already been written once. However, the {struct nat_entry}->flag did not have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and write last_folio again after Thread B finishes f2fs_write_checkpoint. After SPO and reboot, it was detected that {struct node_info}->blk_addr was not NULL_ADDR because Thread B successfully write the checkpoint. This issue only occurs in atomic write scenarios. For regular file fsync operations, the folio must be dirty. If block_operations->f2fs_sync_node_pages successfully submit the folio write, this path will not be executed. Otherwise, the f2fs_write_checkpoint will need to wait for the folio write submission to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the situation where f2fs_need_dentry_mark checks that the {struct nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has already been submitted, will not occur. Therefore, for atomic file fsync, sbi->node_write should be acquired through __write_node_folio to ensure that the IS_CHECKPOINTED flag correctly indicates that the checkpoint write has been completed. | ||||
| CVE-2026-32632 | 1 Nicolargo | 1 Glances | 2026-03-19 | 5.9 Medium |
| Glances is an open-source system cross-platform monitoring tool. Glances recently added DNS rebinding protection for the MCP endpoint, but prior to version 4.5.2, the main REST/WebUI FastAPI application still accepts arbitrary `Host` headers and does not apply `TrustedHostMiddleware` or an equivalent host allowlist. As a result, the REST API, WebUI, and token endpoint remain reachable through attacker-controlled domains in classic DNS rebinding scenarios. Once the victim browser has rebound the attacker domain to the Glances service, same-origin policy no longer protects the API because the browser considers the rebinding domain to be the origin. This is a distinct issue from the previously reported default CORS weakness. CORS is not required for exploitation here because DNS rebinding causes the victim browser to treat the malicious domain as same-origin with the rebinding target. Version 4.5.2 contains a patch for the issue. | ||||
| CVE-2026-23268 | 1 Linux | 1 Linux Kernel | 2026-03-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unprivileged local user can do privileged policy management An unprivileged local user can load, replace, and remove profiles by opening the apparmorfs interfaces, via a confused deputy attack, by passing the opened fd to a privileged process, and getting the privileged process to write to the interface. This does require a privileged target that can be manipulated to do the write for the unprivileged process, but once such access is achieved full policy management is possible and all the possible implications that implies: removing confinement, DoS of system or target applications by denying all execution, by-passing the unprivileged user namespace restriction, to exploiting kernel bugs for a local privilege escalation. The policy management interface can not have its permissions simply changed from 0666 to 0600 because non-root processes need to be able to load policy to different policy namespaces. Instead ensure the task writing the interface has privileges that are a subset of the task that opened the interface. This is already done via policy for confined processes, but unconfined can delegate access to the opened fd, by-passing the usual policy check. | ||||
| CVE-2026-23269 | 1 Linux | 1 Linux Kernel | 2026-03-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: validate DFA start states are in bounds in unpack_pdb Start states are read from untrusted data and used as indexes into the DFA state tables. The aa_dfa_next() function call in unpack_pdb() will access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds the number of states in the DFA, this results in an out-of-bound read. ================================================================== BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360 Read of size 4 at addr ffff88811956fb90 by task su/1097 ... Reject policies with out-of-bounds start states during unpacking to prevent the issue. | ||||
| CVE-2026-23270 | 1 Linux | 1 Linux Kernel | 2026-03-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ | ||||
| CVE-2026-4396 | 1 Devolutions | 1 Hub Reporting Service | 2026-03-19 | 8.3 High |
| Improper certificate validation in Devolutions Hub Reporting Service 2025.3.1.1 and earlier allows a network attacker to perform a man-in-the-middle attack via disabled TLS certificate verification. | ||||
| CVE-2025-13601 | 2 Gnome, Redhat | 40 Glib, Ceph Storage, Codeready Linux Builder and 37 more | 2026-03-19 | 7.7 High |
| A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string. | ||||
| CVE-2026-22730 | 1 Vmware | 1 Spring | 2026-03-19 | 8.8 High |
| A critical SQL injection vulnerability in Spring AI's MariaDBFilterExpressionConverter allows attackers to bypass metadata-based access controls and execute arbitrary SQL commands. The vulnerability exists due to missing input sanitization. | ||||
| CVE-2026-22727 | 1 Cloudfoundry | 1 Cloud Foundry | 2026-03-19 | 7.5 High |
| Unprotected internal endpoints in Cloud Foundry Capi Release 1.226.0 and below, and CF Deployment v54.9.0 and below on all platforms allows any user who has bypassed the firewall to potentially replace droplets and therefore applications allowing them to access secure application information. | ||||
| CVE-2026-25937 | 1 Glpi-project | 1 Glpi | 2026-03-19 | 6.5 Medium |
| GLPI is a free Asset and IT management software package. Starting in version 11.0.0 and prior to version 11.0.6, a malicious actor with knowledge of a user's credentials can bypass MFA and steal their account. Version 11.0.6 fixes the issue. | ||||
| CVE-2025-66376 | 2 Synacor, Zimbra | 2 Zimbra Collaboration Suite, Collaboration | 2026-03-19 | 7.2 High |
| Zimbra Collaboration (ZCS) 10 before 10.0.18 and 10.1 before 10.1.13 allows Classic UI stored XSS via Cascading Style Sheets (CSS) @import directives in an HTML e-mail message. | ||||
| CVE-2026-3181 | 2026-03-18 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2024-5042 | 1 Redhat | 2 Acm, Openshift Data Foundation | 2026-03-18 | 6.6 Medium |
| A flaw was found in the Submariner project. Due to unnecessary role-based access control permissions, a privileged attacker can run a malicious container on a node that may allow them to steal service account tokens and further compromise other nodes and potentially the entire cluster. | ||||
| CVE-2024-9355 | 1 Redhat | 22 Amq Streams, Ansible Automation Platform, Container Native Virtualization and 19 more | 2026-03-18 | 6.5 Medium |
| A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum. It is also possible to force a derived key to be all zeros instead of an unpredictable value. This may have follow-on implications for the Go TLS stack. | ||||
| CVE-2026-23208 | 1 Linux | 1 Linux Kernel | 2026-03-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Prevent excessive number of frames In this case, the user constructed the parameters with maxpacksize 40 for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer size for each data URB is maxpacksize * packets, which in this example is 40 * 6 = 240; When the user performs a write operation to send audio data into the ALSA PCM playback stream, the calculated number of frames is packsize[0] * packets = 264, which exceeds the allocated URB buffer size, triggering the out-of-bounds (OOB) issue reported by syzbot [1]. Added a check for the number of single data URB frames when calculating the number of frames to prevent [1]. [1] BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506 Call Trace: copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611 prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333 | ||||
| CVE-2026-23209 | 1 Linux | 1 Linux Kernel | 2026-03-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, ¶ms, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue. | ||||