Export limit exceeded: 15077 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15077 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-8168 | 2 D-link, Dlink | 3 Dir-513, Dir-513, Dir-513 Firmware | 2025-07-31 | 8.8 High |
| A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2025-8169 | 2 D-link, Dlink | 3 Dir-513, Dir-513, Dir-513 Firmware | 2025-07-31 | 8.8 High |
| A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2025-8184 | 2 D-link, Dlink | 3 Dir-513, Dir-513, Dir-513 Firmware | 2025-07-31 | 8.8 High |
| A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2017-6743 | 1 Cisco | 2 Ios, Ios Xe | 2025-07-31 | 8.8 High |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | ||||
| CVE-2017-6741 | 1 Cisco | 1 Ios Xe | 2025-07-31 | N/A |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | ||||
| CVE-2017-6740 | 1 Cisco | 2 Ios, Ios Xe | 2025-07-31 | 8.8 High |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | ||||
| CVE-2025-3108 | 1 Llamaindex | 1 Llamaindex | 2025-07-30 | 7.5 High |
| A critical deserialization vulnerability exists in the run-llama/llama_index library's JsonPickleSerializer component, affecting versions v0.12.27 through v0.12.40. This vulnerability allows remote code execution due to an insecure fallback to Python's pickle module. JsonPickleSerializer prioritizes deserialization using pickle.loads(), which can execute arbitrary code when processing untrusted data. Attackers can exploit this by crafting malicious payloads to achieve full system compromise. The root cause includes an insecure fallback mechanism, lack of validation or safeguards, misleading design, and violation of Python security guidelines. | ||||
| CVE-2024-2004 | 5 Apple, Fedoraproject, Haxx and 2 more | 16 Macos, Fedora, Curl and 13 more | 2025-07-30 | 3.5 Low |
| When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled. curl --proto -all,-http http://curl.se The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug. | ||||
| CVE-2025-3820 | 1 Tenda | 4 I24, I24 Firmware, W12 and 1 more | 2025-07-30 | 8.8 High |
| A vulnerability was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644) and classified as critical. Affected by this issue is the function cgiSysUplinkCheckSet of the file /bin/httpd. The manipulation of the argument hostIp1/hostIp2 leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-3802 | 1 Tenda | 4 I24, I24 Firmware, W12 and 1 more | 2025-07-30 | 8.8 High |
| A vulnerability was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). It has been declared as critical. This vulnerability affects the function cgiPingSet of the file /bin/httpd. The manipulation of the argument pingIP leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-3803 | 1 Tenda | 4 I24, I24 Firmware, W12 and 1 more | 2025-07-30 | 8.8 High |
| A vulnerability was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). It has been rated as critical. This issue affects the function cgiSysScheduleRebootSet of the file /bin/httpd. The manipulation of the argument rebootDate leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-4007 | 1 Tenda | 4 I24, I24 Firmware, W12 and 1 more | 2025-07-30 | 8.8 High |
| A vulnerability classified as critical was found in Tenda W12 and i24 3.0.0.4(2887)/3.0.0.5(3644). Affected by this vulnerability is the function cgidhcpsCfgSet of the file /goform/modules of the component httpd. The manipulation of the argument json leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-54127 | 2 Haxtheweb, Psu | 2 Haxcms-nodejs, Haxcms-nodejs | 2025-07-30 | 9.8 Critical |
| HAXcms with nodejs backend allows users to start the server in any HAXsite or HAXcms instance. In versions 11.0.6 and below, the NodeJS version of HAXcms uses an insecure default configuration designed for local development. The default configuration does not perform authorization or authentication checks. If a user were to deploy haxcms-nodejs without modifying the default settings, ‘HAXCMS_DISABLE_JWT_CHECKS‘ would be set to ‘true‘ and their deployment would lack session authentication. This is fixed in version 11.0.7. | ||||
| CVE-2025-7546 | 1 Gnu | 1 Binutils | 2025-07-30 | 5.3 Medium |
| A vulnerability, which was classified as problematic, has been found in GNU Binutils 2.45. Affected by this issue is the function bfd_elf_set_group_contents of the file bfd/elf.c. The manipulation leads to out-of-bounds write. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The name of the patch is 41461010eb7c79fee7a9d5f6209accdaac66cc6b. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2025-7545 | 1 Gnu | 1 Binutils | 2025-07-30 | 5.3 Medium |
| A vulnerability classified as problematic was found in GNU Binutils 2.45. Affected by this vulnerability is the function copy_section of the file binutils/objcopy.c. The manipulation leads to heap-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The patch is named 08c3cbe5926e4d355b5cb70bbec2b1eeb40c2944. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2024-1681 | 1 Corydolphin | 1 Flask-cors | 2025-07-30 | 5.3 Medium |
| corydolphin/flask-cors is vulnerable to log injection when the log level is set to debug. An attacker can inject fake log entries into the log file by sending a specially crafted GET request containing a CRLF sequence in the request path. This vulnerability allows attackers to corrupt log files, potentially covering tracks of other attacks, confusing log post-processing tools, and forging log entries. The issue is due to improper output neutralization for logs. | ||||
| CVE-2013-1690 | 6 Canonical, Debian, Mozilla and 3 more | 17 Ubuntu Linux, Debian Linux, Firefox and 14 more | 2025-07-30 | 8.8 High |
| Mozilla Firefox before 22.0, Firefox ESR 17.x before 17.0.7, Thunderbird before 17.0.7, and Thunderbird ESR 17.x before 17.0.7 do not properly handle onreadystatechange events in conjunction with page reloading, which allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted web site that triggers an attempt to execute data at an unmapped memory location. | ||||
| CVE-2014-8439 | 5 Adobe, Apple, Linux and 2 more | 9 Air, Air Sdk, Air Sdk \& Compiler and 6 more | 2025-07-30 | 8.8 High |
| Adobe Flash Player before 13.0.0.258 and 14.x and 15.x before 15.0.0.239 on Windows and OS X and before 11.2.202.424 on Linux, Adobe AIR before 15.0.0.293, Adobe AIR SDK before 15.0.0.302, and Adobe AIR SDK & Compiler before 15.0.0.302 allow attackers to execute arbitrary code or cause a denial of service (invalid pointer dereference) via unspecified vectors. | ||||
| CVE-2015-2426 | 1 Microsoft | 9 Windows 10, Windows 7, Windows 8 and 6 more | 2025-07-30 | 8.8 High |
| Buffer underflow in atmfd.dll in the Windows Adobe Type Manager Library in Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2012 Gold and R2, and Windows RT Gold and 8.1 allows remote attackers to execute arbitrary code via a crafted OpenType font, aka "OpenType Font Driver Vulnerability." | ||||
| CVE-2015-2546 | 1 Microsoft | 9 Windows 10 1507, Windows 7, Windows 8 and 6 more | 2025-07-30 | 8.2 High |
| The kernel-mode driver in Microsoft Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT Gold and 8.1, and Windows 10 allows local users to gain privileges via a crafted application, aka "Win32k Memory Corruption Elevation of Privilege Vulnerability," a different vulnerability than CVE-2015-2511, CVE-2015-2517, and CVE-2015-2518. | ||||