Export limit exceeded: 16765 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16765 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38664 | 1 Linux | 1 Linux Kernel | 2025-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dpsub: Always register bridge We must always register the DRM bridge, since zynqmp_dp_hpd_work_func calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be initialized. We do this before zynqmp_dpsub_drm_init since that calls drm_bridge_attach. This fixes the following lockdep warning: [ 19.217084] ------------[ cut here ]------------ [ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550 [ 19.241696] Modules linked in: [ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96 [ 19.252046] Hardware name: xlnx,zynqmp (DT) [ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func [ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.269104] pc : __mutex_lock+0x4bc/0x550 [ 19.273364] lr : __mutex_lock+0x4bc/0x550 [ 19.277592] sp : ffffffc085c5bbe0 [ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8 [ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000 [ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000 [ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000 [ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720 [ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001 [ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888 [ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000 [ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000 [ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880 [ 19.356581] Call trace: [ 19.359160] __mutex_lock+0x4bc/0x550 [ 19.363032] mutex_lock_nested+0x24/0x30 [ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c [ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54 [ 19.376364] process_one_work+0x3ac/0x988 [ 19.380660] worker_thread+0x398/0x694 [ 19.384736] kthread+0x1bc/0x1c0 [ 19.388241] ret_from_fork+0x10/0x20 [ 19.392031] irq event stamp: 183 [ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4 [ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04 [ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.432614] ---[ end trace 0000000000000000 ]--- (cherry picked from commit 61ba791c4a7a09a370c45b70a81b8c7d4cf6b2ae) | ||||
| CVE-2024-23848 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-30 | 5.5 Medium |
| In the Linux kernel through 6.7.1, there is a use-after-free in cec_queue_msg_fh, related to drivers/media/cec/core/cec-adap.c and drivers/media/cec/core/cec-api.c. | ||||
| CVE-2023-40683 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-05-30 | 8.8 High |
| IBM OpenPages with Watson 8.3 and 9.0 could allow remote attacker to bypass security restrictions, caused by insufficient authorization checks. By authenticating as an OpenPages user and using non-public APIs, an attacker could exploit this vulnerability to bypass security and gain unauthorized administrative access to the application. IBM X-Force ID: 264005. | ||||
| CVE-2023-47152 | 3 Ibm, Linux, Microsoft | 5 Aix, Db2, Linux On Ibm Z and 2 more | 2025-05-30 | 5.9 Medium |
| IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5 is vulnerable to an insecure cryptographic algorithm and to information disclosure in stack trace under exceptional conditions. | ||||
| CVE-2023-47158 | 5 Hp, Ibm, Linux and 2 more | 7 Hp-ux, Aix, Db2 and 4 more | 2025-05-30 | 5.3 Medium |
| IBM DB2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1 and 11.5 could allow an authenticated user with CONNECT privileges to cause a denial of service using a specially crafted query. IBM X-Force ID: 270750. | ||||
| CVE-2023-4554 | 3 Linux, Microsoft, Opentext | 3 Linux Kernel, Windows, Appbuilder | 2025-05-29 | 4.9 Medium |
| Improper Restriction of XML External Entity Reference vulnerability in OpenText AppBuilder on Windows, Linux allows Server Side Request Forgery, Probe System Files. AppBuilder's XML processor is vulnerable to XML External Entity Processing (XXE), allowing an authenticated user to upload specially crafted XML files to induce server-side request forgery, disclose files local to the server that processes them. This issue affects AppBuilder: from 21.2 before 23.2. | ||||
| CVE-2024-1085 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-29 | 7.8 High |
| A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. The nft_setelem_catchall_deactivate() function checks whether the catch-all set element is active in the current generation instead of the next generation before freeing it, but only flags it inactive in the next generation, making it possible to free the element multiple times, leading to a double free vulnerability. We recommend upgrading past commit b1db244ffd041a49ecc9618e8feb6b5c1afcdaa7. | ||||
| CVE-2022-41222 | 5 Canonical, Debian, Linux and 2 more | 7 Ubuntu Linux, Debian Linux, Linux Kernel and 4 more | 2025-05-28 | 7 High |
| mm/mremap.c in the Linux kernel before 5.13.3 has a use-after-free via a stale TLB because an rmap lock is not held during a PUD move. | ||||
| CVE-2022-41218 | 3 Debian, Linux, Redhat | 5 Debian Linux, Linux Kernel, Enterprise Linux and 2 more | 2025-05-28 | 5.5 Medium |
| In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release. | ||||
| CVE-2022-48733 | 1 Linux | 1 Linux Kernel | 2025-05-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free after failure to create a snapshot At ioctl.c:create_snapshot(), we allocate a pending snapshot structure and then attach it to the transaction's list of pending snapshots. After that we call btrfs_commit_transaction(), and if that returns an error we jump to 'fail' label, where we kfree() the pending snapshot structure. This can result in a later use-after-free of the pending snapshot: 1) We allocated the pending snapshot and added it to the transaction's list of pending snapshots; 2) We call btrfs_commit_transaction(), and it fails either at the first call to btrfs_run_delayed_refs() or btrfs_start_dirty_block_groups(). In both cases, we don't abort the transaction and we release our transaction handle. We jump to the 'fail' label and free the pending snapshot structure. We return with the pending snapshot still in the transaction's list; 3) Another task commits the transaction. This time there's no error at all, and then during the transaction commit it accesses a pointer to the pending snapshot structure that the snapshot creation task has already freed, resulting in a user-after-free. This issue could actually be detected by smatch, which produced the following warning: fs/btrfs/ioctl.c:843 create_snapshot() warn: '&pending_snapshot->list' not removed from list So fix this by not having the snapshot creation ioctl directly add the pending snapshot to the transaction's list. Instead add the pending snapshot to the transaction handle, and then at btrfs_commit_transaction() we add the snapshot to the list only when we can guarantee that any error returned after that point will result in a transaction abort, in which case the ioctl code can safely free the pending snapshot and no one can access it anymore. | ||||
| CVE-2024-38577 | 1 Linux | 1 Linux Kernel | 2025-05-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38581 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix use-after-free issue Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c | ||||
| CVE-2022-48740 | 1 Linux | 1 Linux Kernel | 2025-05-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix double free of cond_list on error paths On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. [PM: fix line lengths in the description] | ||||
| CVE-2025-37838 | 1 Linux | 1 Linux Kernel | 2025-05-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition In the ssi_protocol_probe() function, &ssi->work is bound with ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function within the ssip_pn_ops structure is capable of starting the work. If we remove the module which will call ssi_protocol_remove() to make a cleanup, it will free ssi through kfree(ssi), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ssip_xmit_work ssi_protocol_remove | kfree(ssi); | | struct hsi_client *cl = ssi->cl; | // use ssi Fix it by ensuring that the work is canceled before proceeding with the cleanup in ssi_protocol_remove(). | ||||
| CVE-2025-37785 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix OOB read when checking dotdot dir Mounting a corrupted filesystem with directory which contains '.' dir entry with rec_len == block size results in out-of-bounds read (later on, when the corrupted directory is removed). ext4_empty_dir() assumes every ext4 directory contains at least '.' and '..' as directory entries in the first data block. It first loads the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry() and then uses its rec_len member to compute the location of '..' dir entry (in ext4_next_entry). It assumes the '..' dir entry fits into the same data block. If the rec_len of '.' is precisely one block (4KB), it slips through the sanity checks (it is considered the last directory entry in the data block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the memory slot allocated to the data block. The following call to ext4_check_dir_entry() on new value of de then dereferences this pointer which results in out-of-bounds mem access. Fix this by extending __ext4_check_dir_entry() to check for '.' dir entries that reach the end of data block. Make sure to ignore the phony dir entries for checksum (by checking name_len for non-zero). Note: This is reported by KASAN as use-after-free in case another structure was recently freed from the slot past the bound, but it is really an OOB read. This issue was found by syzkaller tool. Call Trace: [ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710 [ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375 [ 38.595158] [ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1 [ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 38.595304] Call Trace: [ 38.595308] <TASK> [ 38.595311] dump_stack_lvl+0xa7/0xd0 [ 38.595325] print_address_description.constprop.0+0x2c/0x3f0 [ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595349] print_report+0xaa/0x250 [ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595368] ? kasan_addr_to_slab+0x9/0x90 [ 38.595378] kasan_report+0xab/0xe0 [ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595400] __ext4_check_dir_entry+0x67e/0x710 [ 38.595410] ext4_empty_dir+0x465/0x990 [ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10 [ 38.595432] ext4_rmdir.part.0+0x29a/0xd10 [ 38.595441] ? __dquot_initialize+0x2a7/0xbf0 [ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10 [ 38.595464] ? __pfx___dquot_initialize+0x10/0x10 [ 38.595478] ? down_write+0xdb/0x140 [ 38.595487] ? __pfx_down_write+0x10/0x10 [ 38.595497] ext4_rmdir+0xee/0x140 [ 38.595506] vfs_rmdir+0x209/0x670 [ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190 [ 38.595529] do_rmdir+0x363/0x3c0 [ 38.595537] ? __pfx_do_rmdir+0x10/0x10 [ 38.595544] ? strncpy_from_user+0x1ff/0x2e0 [ 38.595561] __x64_sys_unlinkat+0xf0/0x130 [ 38.595570] do_syscall_64+0x5b/0x180 [ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-22097 | 1 Linux | 1 Linux Kernel | 2025-05-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix use after free and double free on init error If the driver initialization fails, the vkms_exit() function might access an uninitialized or freed default_config pointer and it might double free it. Fix both possible errors by initializing default_config only when the driver initialization succeeded. | ||||
| CVE-2025-22085 | 1 Linux | 1 Linux Kernel | 2025-05-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix use-after-free when rename device name Syzbot reported a slab-use-after-free with the following call trace: ================================================================== BUG: KASAN: slab-use-after-free in nla_put+0xd3/0x150 lib/nlattr.c:1099 Read of size 5 at addr ffff888140ea1c60 by task syz.0.988/10025 CPU: 0 UID: 0 PID: 10025 Comm: syz.0.988 Not tainted 6.14.0-rc4-syzkaller-00859-gf77f12010f67 #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0x16e/0x5b0 mm/kasan/report.c:521 kasan_report+0x143/0x180 mm/kasan/report.c:634 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 nla_put+0xd3/0x150 lib/nlattr.c:1099 nla_put_string include/net/netlink.h:1621 [inline] fill_nldev_handle+0x16e/0x200 drivers/infiniband/core/nldev.c:265 rdma_nl_notify_event+0x561/0xef0 drivers/infiniband/core/nldev.c:2857 ib_device_notify_register+0x22/0x230 drivers/infiniband/core/device.c:1344 ib_register_device+0x1292/0x1460 drivers/infiniband/core/device.c:1460 rxe_register_device+0x233/0x350 drivers/infiniband/sw/rxe/rxe_verbs.c:1540 rxe_net_add+0x74/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0xde/0x1a0 drivers/infiniband/sw/rxe/rxe.c:212 nldev_newlink+0x5ea/0x680 drivers/infiniband/core/nldev.c:1795 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x6dd/0x9e0 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:709 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:724 ____sys_sendmsg+0x53a/0x860 net/socket.c:2564 ___sys_sendmsg net/socket.c:2618 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2650 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f42d1b8d169 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 ... RSP: 002b:00007f42d2960038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f42d1da6320 RCX: 00007f42d1b8d169 RDX: 0000000000000000 RSI: 00004000000002c0 RDI: 000000000000000c RBP: 00007f42d1c0e2a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f42d1da6320 R15: 00007ffe399344a8 </TASK> Allocated by task 10025: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4294 [inline] __kmalloc_node_track_caller_noprof+0x28b/0x4c0 mm/slub.c:4313 __kmemdup_nul mm/util.c:61 [inline] kstrdup+0x42/0x100 mm/util.c:81 kobject_set_name_vargs+0x61/0x120 lib/kobject.c:274 dev_set_name+0xd5/0x120 drivers/base/core.c:3468 assign_name drivers/infiniband/core/device.c:1202 [inline] ib_register_device+0x178/0x1460 drivers/infiniband/core/device.c:1384 rxe_register_device+0x233/0x350 drivers/infiniband/sw/rxe/rxe_verbs.c:1540 rxe_net_add+0x74/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0xde/0x1a0 drivers/infiniband/sw/rxe/rxe.c:212 nldev_newlink+0x5ea/0x680 drivers/infiniband/core/nldev.c:1795 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x6dd/0x9e0 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8de/0xcb0 net ---truncated--- | ||||
| CVE-2025-22062 | 1 Linux | 1 Linux Kernel | 2025-05-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: add mutual exclusion in proc_sctp_do_udp_port() We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start() or risk a crash as syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653 Call Trace: <TASK> udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181 sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930 proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553 proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601 iter_file_splice_write+0x91c/0x1150 fs/splice.c:738 do_splice_from fs/splice.c:935 [inline] direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158 splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102 do_splice_direct_actor fs/splice.c:1201 [inline] do_splice_direct+0x174/0x240 fs/splice.c:1227 do_sendfile+0xafd/0xe50 fs/read_write.c:1368 __do_sys_sendfile64 fs/read_write.c:1429 [inline] __se_sys_sendfile64 fs/read_write.c:1415 [inline] __x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] | ||||
| CVE-2025-22052 | 1 Linux | 1 Linux Kernel | 2025-05-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in ni_usb If the usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL. | ||||
| CVE-2025-22051 | 1 Linux | 1 Linux Kernel | 2025-05-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in agilent usb If the agilent usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL. | ||||