Export limit exceeded: 16770 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16770 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-41743 | 2 Ibm, Linux | 2 Txseries For Multiplatforms, Linux Kernel | 2025-07-16 | 7.5 High |
| IBM TXSeries for Multiplatforms 10.1 could allow a remote attacker to cause a denial of service using persistent connections due to improper allocation of resources. | ||||
| CVE-2024-41742 | 2 Ibm, Linux | 2 Txseries For Multiplatforms, Linux Kernel | 2025-07-16 | 7.5 High |
| IBM TXSeries for Multiplatforms 10.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. | ||||
| CVE-2024-45654 | 2 Ibm, Linux | 2 Security Qradar Edr, Linux Kernel | 2025-07-16 | 4.3 Medium |
| IBM Security ReaQta 3.12 could allow an authenticated user to perform unauthorized actions due to reliance on untrusted inputs. | ||||
| CVE-2024-45100 | 2 Ibm, Linux | 2 Security Qradar Edr, Linux Kernel | 2025-07-16 | 4.9 Medium |
| IBM Security ReaQta 3.12 could allow a privileged user to cause a denial of service by sending multiple administration requests due to improper allocation of resources. | ||||
| CVE-2024-45640 | 2 Ibm, Linux | 2 Security Qradar Edr, Linux Kernel | 2025-07-15 | 5.3 Medium |
| IBM Security ReaQta 3.12 returns sensitive information in an HTTP response that could be used in further attacks against the system. | ||||
| CVE-2024-58091 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Add shadow buffering for deferred I/O DMA areas are not necessarily backed by struct page, so we cannot rely on it for deferred I/O. Allocate a shadow buffer for drivers that require deferred I/O and use it as framebuffer memory. Fixes driver errors about being "Unable to handle kernel NULL pointer dereference at virtual address" or "Unable to handle kernel paging request at virtual address". The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial allocation, which creates the DMA-backed buffer object, and a tail that sets up the fbdev data structures. There is a tail function for direct memory mappings and a tail function for deferred I/O with the shadow buffer. It is no longer possible to use deferred I/O without shadow buffer. It can be re-added if there exists a reliably test for usable struct page in the allocated DMA-backed buffer object. | ||||
| CVE-2024-35882 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP Jan Schunk reports that his small NFS servers suffer from memory exhaustion after just a few days. A bisect shows that commit e18e157bb5c8 ("SUNRPC: Send RPC message on TCP with a single sock_sendmsg() call") is the first bad commit. That commit assumed that sock_sendmsg() releases all the pages in the underlying bio_vec array, but the reality is that it doesn't. svc_xprt_release() releases the rqst's response pages, but the record marker page fragment isn't one of those, so it is never released. This is a narrow fix that can be applied to stable kernels. A more extensive fix is in the works. | ||||
| CVE-2022-49490 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected mdp5_get_global_state runs the risk of hitting a -EDEADLK when acquiring the modeset lock, but currently mdp5_pipe_release doesn't check for if an error is returned. Because of this, there is a possibility of mdp5_pipe_release hitting a NULL dereference error. To avoid this, let's have mdp5_pipe_release check if mdp5_get_global_state returns an error and propogate that error. Changes since v1: - Separated declaration and initialization of *new_state to avoid compiler warning - Fixed some spelling mistakes in commit message Changes since v2: - Return 0 in case where hwpipe is NULL as this is considered normal behavior - Added 2nd patch in series to fix a similar NULL dereference issue in mdp5_mixer_release Patchwork: https://patchwork.freedesktop.org/patch/485179/ | ||||
| CVE-2022-49360 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on total_data_blocks As Yanming reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215916 The kernel message is shown below: kernel BUG at fs/f2fs/segment.c:2560! Call Trace: allocate_segment_by_default+0x228/0x440 f2fs_allocate_data_block+0x13d1/0x31f0 do_write_page+0x18d/0x710 f2fs_outplace_write_data+0x151/0x250 f2fs_do_write_data_page+0xef9/0x1980 move_data_page+0x6af/0xbc0 do_garbage_collect+0x312f/0x46f0 f2fs_gc+0x6b0/0x3bc0 f2fs_balance_fs+0x921/0x2260 f2fs_write_single_data_page+0x16be/0x2370 f2fs_write_cache_pages+0x428/0xd00 f2fs_write_data_pages+0x96e/0xd50 do_writepages+0x168/0x550 __writeback_single_inode+0x9f/0x870 writeback_sb_inodes+0x47d/0xb20 __writeback_inodes_wb+0xb2/0x200 wb_writeback+0x4bd/0x660 wb_workfn+0x5f3/0xab0 process_one_work+0x79f/0x13e0 worker_thread+0x89/0xf60 kthread+0x26a/0x300 ret_from_fork+0x22/0x30 RIP: 0010:new_curseg+0xe8d/0x15f0 The root cause is: ckpt.valid_block_count is inconsistent with SIT table, stat info indicates filesystem has free blocks, but SIT table indicates filesystem has no free segment. So that during garbage colloection, it triggers panic when LFS allocator fails to find free segment. This patch tries to fix this issue by checking consistency in between ckpt.valid_block_count and block accounted from SIT. | ||||
| CVE-2022-49173 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fsi: Implement a timeout for polling status The data transfer routines must poll the status register to determine when more data can be shifted in or out. If the hardware gets into a bad state, these polling loops may never exit. Prevent this by returning an error if a timeout is exceeded. | ||||
| CVE-2024-58093 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix link state exit during switch upstream function removal Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free"), we would free the ASPM link only after the last function on the bus pertaining to the given link was removed. That was too late. If function 0 is removed before sibling function, link->downstream would point to free'd memory after. After above change, we freed the ASPM parent link state upon any function removal on the bus pertaining to a given link. That is too early. If the link is to a PCIe switch with MFD on the upstream port, then removing functions other than 0 first would free a link which still remains parent_link to the remaining downstream ports. The resulting GPFs are especially frequent during hot-unplug, because pciehp removes devices on the link bus in reverse order. On that switch, function 0 is the virtual P2P bridge to the internal bus. Free exactly when function 0 is removed -- before the parent link is obsolete, but after all subordinate links are gone. [kwilczynski: commit log] | ||||
| CVE-2022-49151 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. We should check that in endpoint is actually present to prevent this warning. Found pipes are now saved to struct mcba_priv and code uses them directly instead of making pipes in place. Fail log: | usb 5-1: BOGUS urb xfer, pipe 3 != type 1 | WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | Modules linked in: | CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0 | Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 | Workqueue: usb_hub_wq hub_event | RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | ... | Call Trace: | <TASK> | mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline] | mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858 | usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 | call_driver_probe drivers/base/dd.c:517 [inline] | ||||
| CVE-2022-49432 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xics: fix refcount leak in icp_opal_init() The of_find_compatible_node() function returns a node pointer with refcount incremented, use of_node_put() on it when done. | ||||
| CVE-2024-26999 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial/pmac_zilog: Remove flawed mitigation for rx irq flood The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. | ||||
| CVE-2022-49553 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate BOOT sectors_per_clusters When the NTFS BOOT sectors_per_clusters field is > 0x80, it represents a shift value. Make sure that the shift value is not too large before using it (NTFS max cluster size is 2MB). Return -EVINVAL if it too large. This prevents negative shift values and shift values that are larger than the field size. Prevents this UBSAN error: UBSAN: shift-out-of-bounds in ../fs/ntfs3/super.c:673:16 shift exponent -192 is negative | ||||
| CVE-2022-49613 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix PM usage_count for console handover When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). | ||||
| CVE-2022-49425 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dereference of stale list iterator after loop body The list iterator variable will be a bogus pointer if no break was hit. Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined value making it unsafe to use that in the comparision to determine if the specific element was found. Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that by chance (or intention of an attacker) it matches the value of 'page' even though the correct element was not found. This is fixed by using a separate list iterator variable for the loop and only setting the original variable if a suitable element was found. Then determing if the element was found is simply checking if the variable is set. | ||||
| CVE-2022-49034 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected, cpu_max_bits_warn() generates a runtime warning similar as below when showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000 [ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430 [ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff [ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890 [ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa [ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000 [ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000 [ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000 [ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286 [ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c [ 3.195868] ... [ 3.199917] Call Trace: [ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c [ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88 [ 3.217625] [<900000000023d268>] __warn+0xd0/0x100 [ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc [ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0 [ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4 [ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4 [ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0 [ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100 [ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94 [ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160 [ 3.281824] ---[ end trace 8b484262b4b8c24c ]--- | ||||
| CVE-2022-49243 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. | ||||
| CVE-2022-49427 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Remove clk_disable in mtk_iommu_remove After the commit b34ea31fe013 ("iommu/mediatek: Always enable the clk on resume"), the iommu clock is controlled by the runtime callback. thus remove the clk control in the mtk_iommu_remove. Otherwise, it will warning like: echo 14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind [ 51.413044] ------------[ cut here ]------------ [ 51.413648] vpp0_smi_iommu already disabled [ 51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/ drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 51.417174] Hardware name: MT8195V/C(ENG) (DT) [ 51.418635] pc : clk_core_disable+0xb0/0xb8 [ 51.419177] lr : clk_core_disable+0xb0/0xb8 ... [ 51.429375] Call trace: [ 51.429694] clk_core_disable+0xb0/0xb8 [ 51.430193] clk_core_disable_lock+0x24/0x40 [ 51.430745] clk_disable+0x20/0x30 [ 51.431189] mtk_iommu_remove+0x58/0x118 [ 51.431705] platform_remove+0x28/0x60 [ 51.432197] device_release_driver_internal+0x110/0x1f0 [ 51.432873] device_driver_detach+0x18/0x28 [ 51.433418] unbind_store+0xd4/0x108 [ 51.433886] drv_attr_store+0x24/0x38 [ 51.434363] sysfs_kf_write+0x40/0x58 [ 51.434843] kernfs_fop_write_iter+0x164/0x1e0 | ||||