Export limit exceeded: 334425 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (334425 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31968 | 2 Htslib, Samtools | 2 Htslib, Htslib | 2026-03-19 | 8.1 High |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. For the `VARINT` and `CONST` encodings, incomplete validation of the context in which the encodings were used could result in up to eight bytes being written beyond the end of a heap allocation, or up to eight bytes being written to the location of a one byte variable on the stack, possibly causing the values to adjacent variables to change unexpectedly. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-31962 | 2 Htslib, Samtools | 2 Htslib, Htslib | 2026-03-19 | 8.8 High |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `cram_decode_seq()` did not handle this correctly in some cases. Where this happened it could result in reading a single byte from beyond the end of a heap allocation, followed by writing a single attacker-controlled byte to the same location. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. | ||||
| CVE-2026-2880 | 2 Fastify, Openjsf | 2 Middie, \@fastify\/middie | 2026-03-19 | 9.1 Critical |
| A vulnerability in @fastify/middie versions < 9.2.0 can result in authentication/authorization bypass when using path-scoped middleware (for example, app.use('/secret', auth)). When Fastify router normalization options are enabled (such as ignoreDuplicateSlashes, useSemicolonDelimiter, and related trailing-slash behavior), crafted request paths may bypass middleware checks while still being routed to protected handlers. | ||||
| CVE-2026-1525 | 2 Nodejs, Undici | 2 Undici, Undici | 2026-03-19 | 6.5 Medium |
| Undici allows duplicate HTTP Content-Length headers when they are provided in an array with case-variant names (e.g., Content-Length and content-length). This produces malformed HTTP/1.1 requests with multiple conflicting Content-Length values on the wire. Who is impacted: * Applications using undici.request(), undici.Client, or similar low-level APIs with headers passed as flat arrays * Applications that accept user-controlled header names without case-normalization Potential consequences: * Denial of Service: Strict HTTP parsers (proxies, servers) will reject requests with duplicate Content-Length headers (400 Bad Request) * HTTP Request Smuggling: In deployments where an intermediary and backend interpret duplicate headers inconsistently (e.g., one uses the first value, the other uses the last), this can enable request smuggling attacks leading to ACL bypass, cache poisoning, or credential hijacking | ||||
| CVE-2026-32878 | 2 Parse Community, Parseplatform | 2 Parse Server, Parse-server | 2026-03-19 | 7.5 High |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.20 and 8.6.44, an attacker can bypass the default request keyword denylist protection and the class-level permission for adding fields by sending a crafted request that exploits prototype pollution in the deep copy mechanism. This allows injecting fields into class schemas that have field addition locked down, and can cause permanent schema type conflicts that cannot be resolved even with the master key. In 9.6.0-alpha.20 and 8.6.44, the vulnerable third-party deep copy library has been replaced with a built-in deep clone mechanism that handles prototype properties safely, allowing the existing denylist check to correctly detect and reject the prohibited keyword. No known workarounds are available. | ||||
| CVE-2026-32886 | 2 Parse Community, Parseplatform | 2 Parse Server, Parse-server | 2026-03-19 | 7.5 High |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.24 and 8.6.47, remote clients can crash the Parse Server process by calling a cloud function endpoint with a crafted function name that traverses the JavaScript prototype chain of a registered cloud function handler, causing a stack overflow. The fix in versions 9.6.0-alpha.24 and 8.6.47 restricts property lookups during cloud function name resolution to own properties only, preventing prototype chain traversal from stored function handlers. There is no known workaround. | ||||
| CVE-2026-25769 | 1 Wazuh | 1 Wazuh | 2026-03-19 | 9.1 Critical |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Versions 4.0.0 through 4.14.2 have a Remote Code Execution (RCE) vulnerability due to Deserialization of Untrusted Data). All Wazuh deployments using cluster mode (master/worker architecture) and any organization with a compromised worker node (e.g., through initial access, insider threat, or supply chain attack) are impacted. An attacker who gains access to a worker node (through any means) can achieve full RCE on the master node with root privileges. Version 4.14.3 fixes the issue. | ||||
| CVE-2024-7557 | 1 Redhat | 2 Openshift Ai, Openshift Data Science | 2026-03-19 | 8.8 High |
| A vulnerability was found in OpenShift AI that allows for authentication bypass and privilege escalation across models within the same namespace. When deploying AI models, the UI provides the option to protect models with authentication. However, credentials from one model can be used to access other models and APIs within the same namespace. The exposed ServiceAccount tokens, visible in the UI, can be utilized with oc --token={token} to exploit the elevated view privileges associated with the ServiceAccount, leading to unauthorized access to additional resources. | ||||
| CVE-2024-44731 | 2026-03-19 | 4.7 Medium | ||
| Mirotalk before commit 9de226 was discovered to contain a DOM-based cross-site scripting (XSS) vulnerability which allows attackers to execute arbitrary code via sending crafted payloads in messages to other users over RTC connections. | ||||
| CVE-2026-25772 | 1 Wazuh | 1 Wazuh | 2026-03-19 | 4.9 Medium |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.4.0 and prior to version 4.14.3, a stack-based buffer overflow vulnerability exists in the Wazuh Database synchronization module (`wdb_delta_event.c`). The SQL query construction logic allows for an integer underflow when calculating the remaining buffer size. This occurs because the code incorrectly aggregates the return value of `snprintf`. If a specific database synchronization payload exceeds the size of the query buffer (2048 bytes), the size calculation wraps around to a massive integer, effectively removing bounds checking for subsequent writes. This allows an attacker to corrupt the stack, leading to a Denial of Service (DoS) or potentially RCE. Version 4.14.3 fixes the issue. | ||||
| CVE-2026-25790 | 1 Wazuh | 1 Wazuh | 2026-03-19 | 4.9 Medium |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, multiple stack-based buffer overflows exist in the Security Configuration Assessment (SCA) decoder (`wazuh-analysisd`). The use of `sprintf` with a floating-point (`%lf`) format specifier on a fixed-size 128-byte buffer allows a remote attacker to overflow the stack. A specially crafted JSON event can trigger this overflow, leading to a denial of service (crash) or potential RCE on the Wazuh manager. The vulnerability is located in `/src/analysisd/decoders/security_configuration_assessment.c`, within the `FillScanInfo` and `FillCheckEventInfo` functions. In multiple locations, a 128-byte buffer (`char value[OS_SIZE_128];`) is allocated on the stack to hold the string representation of a number from a JSON event. The code checks if the number is an integer or a double. If it's a double, it uses `sprintf(value, "%lf", ...)` to perform the conversion. This `sprintf` call is unbounded. If a floating-point number with a large exponent (e.g., `1.0e150`) is provided, `sprintf` will attempt to write its full string representation (a "1" followed by 150 zeros), which is larger than the 128-byte buffer, corrupting the stack. Version 4.14.3 patches the issue. | ||||
| CVE-2026-25770 | 1 Wazuh | 1 Wazuh | 2026-03-19 | 9.1 Critical |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, a privilege escalation vulnerability exists in the Wazuh Manager's cluster synchronization protocol. The `wazuh-clusterd` service allows authenticated nodes to write arbitrary files to the manager’s file system with the permissions of the `wazuh` system user. Due to insecure default permissions, the `wazuh` user has write access to the manager's main configuration file (`/var/ossec/etc/ossec.conf`). By leveraging the cluster protocol to overwrite `ossec.conf`, an attacker can inject a malicious `<localfile>` command block. The `wazuh-logcollector` service, which runs as root, parses this configuration and executes the injected command. This chain allows an attacker with cluster credentials to gain full Root Remote Code Execution, violating the principle of least privilege and bypassing the intended security model. Version 4.14.3 fixes the issue. | ||||
| CVE-2025-53711 | 1 Tp-link | 5 Tl-wr841n, Tl-wr841n(eu), Tl-wr841n Firmware and 2 more | 2026-03-19 | 7.5 High |
| A vulnerability has been found in TP-Link TL-WR841N v11, TL-WR842ND v2 and TL-WR494N v3. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-31996 | 1 Openclaw | 1 Openclaw | 2026-03-19 | 3.6 Low |
| OpenClaw versions prior to 2026.2.19 tools.exec.safeBins contains an input validation bypass vulnerability that allows attackers to execute unintended filesystem operations through sort output flags or recursive grep flags. Attackers with command execution access can leverage sort -o flag for arbitrary file writes or grep -R flag for recursive file reads, circumventing intended stdin-only restrictions. | ||||
| CVE-2026-1276 | 1 Ibm | 1 Qradar Security Information And Event Manager | 2026-03-19 | 5.4 Medium |
| IBM QRadar SIEM 7.5.0 through 7.5.0 Update Package 14 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | ||||
| CVE-2026-32736 | 1 Hytalemodding | 1 Wiki | 2026-03-19 | 4.3 Medium |
| The Hytale Modding Wiki is a free service for Hytale mods to host their documentation & wikis. An Insecure Direct Object Reference (IDOR) vulnerability in versions of the wiki prior to 1.0.0 exposes mod authors' personal information - including full names and email addresses - to any authenticated user who visits a mod page. Any user who creates an account can access sensitive author details by simply navigating to a mod's page via its slug. Version 1.0.0 fixes the issue. | ||||
| CVE-2026-32944 | 2 Parse Community, Parseplatform | 2 Parse Server, Parse-server | 2026-03-19 | 7.5 High |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.21 and 8.6.45, an unauthenticated attacker can crash the Parse Server process by sending a single request with deeply nested query condition operators. This terminates the server and denies service to all connected clients. Starting in version 9.6.0-alpha.21 and 8.6.45, a depth limit for query condition operator nesting has been added via the `requestComplexity.queryDepth` server option. The option is disabled by default to avoid a breaking change. To mitigate, upgrade and set the option to a value appropriate for your app. No known workarounds are available. | ||||
| CVE-2026-32943 | 2 Parse Community, Parseplatform | 2 Parse Server, Parse-server | 2026-03-19 | 3.1 Low |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.28 and 8.6.48, the password reset mechanism does not enforce single-use guarantees for reset tokens. When a user requests a password reset, the generated token can be consumed by multiple concurrent requests within a short time window. An attacker who has intercepted a password reset token can race the legitimate user's password reset request, causing both requests to succeed. This may result in the legitimate user believing their password was changed successfully while the attacker's password takes effect instead. All Parse Server deployments that use the password reset feature are affected. Starting in versions 9.6.0-alpha.28 and 8.6.48, the password reset token is now atomically validated and consumed as part of the password update operation. The database query that updates the password includes the reset token as a condition, ensuring that only one concurrent request can successfully consume the token. Subsequent requests using the same token will fail because the token has already been cleared. There is no known workaround other than upgrading. | ||||
| CVE-2026-33042 | 2 Parse Community, Parseplatform | 2 Parse Server, Parse-server | 2026-03-19 | 5.3 Medium |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 9.6.0-alpha.29 and 8.6.49, a user can sign up without providing credentials by sending an empty `authData` object, bypassing the username and password requirement. This allows the creation of authenticated sessions without proper credentials, even when anonymous users are disabled. The fix in 9.6.0-alpha.29 and 8.6.49 ensures that empty or non-actionable `authData` is treated the same as absent `authData` for the purpose of credential validation on new user creation. Username and password are now required when no valid auth provider data is present. As a workaround, use a Cloud Code `beforeSave` trigger on the `_User` class to reject signups where `authData` is empty and no username/password is provided. | ||||
| CVE-2026-23198 | 1 Linux | 1 Linux Kernel | 2026-03-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: <TASK> avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b </TASK> ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: <TASK> avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated--- | ||||