Export limit exceeded: 16229 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16229 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54266 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer() 'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. | ||||
| CVE-2023-54267 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] | ||||
| CVE-2023-54271 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init blk-iocost sometimes causes the following crash: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... RIP: 0010:_raw_spin_lock+0x17/0x30 Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 <f0> 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00 RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001 RDX: ffffc900023b3d20 RSI: ffffc900023b3cf0 RDI: 00000000000000e0 RBP: ffffc900023b3d40 R08: ffffc900023b3c10 R09: 0000000000000003 R10: 0000000000000064 R11: 000000000000000a R12: ffff888102337000 R13: fffffffffffffff2 R14: ffff88810af408c8 R15: ffff8881070c3600 FS: 00007faaaf364fc0(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 00000001097b1000 CR4: 0000000000350ea0 Call Trace: <TASK> ioc_weight_write+0x13d/0x410 cgroup_file_write+0x7a/0x130 kernfs_fop_write_iter+0xf5/0x170 vfs_write+0x298/0x370 ksys_write+0x5f/0xb0 __x64_sys_write+0x1b/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This happens because iocg->ioc is NULL. The field is initialized by ioc_pd_init() and never cleared. The NULL deref is caused by blkcg_activate_policy() installing blkg_policy_data before initializing it. blkcg_activate_policy() was doing the following: 1. Allocate pd's for all existing blkg's and install them in blkg->pd[]. 2. Initialize all pd's. 3. Online all pd's. blkcg_activate_policy() only grabs the queue_lock and may release and re-acquire the lock as allocation may need to sleep. ioc_weight_write() grabs blkcg->lock and iterates all its blkg's. The two can race and if ioc_weight_write() runs during #1 or between #1 and #2, it can encounter a pd which is not initialized yet, leading to crash. The crash can be reproduced with the following script: #!/bin/bash echo +io > /sys/fs/cgroup/cgroup.subtree_control systemd-run --unit touch-sda --scope dd if=/dev/sda of=/dev/null bs=1M count=1 iflag=direct echo 100 > /sys/fs/cgroup/system.slice/io.weight bash -c "echo '8:0 enable=1' > /sys/fs/cgroup/io.cost.qos" & sleep .2 echo 100 > /sys/fs/cgroup/system.slice/io.weight with the following patch applied: > diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c > index fc49be622e05..38d671d5e10c 100644 > --- a/block/blk-cgroup.c > +++ b/block/blk-cgroup.c > @@ -1553,6 +1553,12 @@ int blkcg_activate_policy(struct gendisk *disk, const struct blkcg_policy *pol) > pd->online = false; > } > > + if (system_state == SYSTEM_RUNNING) { > + spin_unlock_irq(&q->queue_lock); > + ssleep(1); > + spin_lock_irq(&q->queue_lock); > + } > + > /* all allocated, init in the same order */ > if (pol->pd_init_fn) > list_for_each_entry_reverse(blkg, &q->blkg_list, q_node) I don't see a reason why all pd's should be allocated, initialized and onlined together. The only ordering requirement is that parent blkgs to be initialized and onlined before children, which is guaranteed from the walking order. Let's fix the bug by allocating, initializing and onlining pd for each blkg and holding blkcg->lock over initialization and onlining. This ensures that an installed blkg is always fully initialized and onlined removing the the race window. | ||||
| CVE-2023-54270 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: usb: siano: Fix use after free bugs caused by do_submit_urb There are UAF bugs caused by do_submit_urb(). One of the KASan reports is shown below: [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890 [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49 [ 36.408316] [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8 [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.416157] Workqueue: 0x0 (events) [ 36.417654] Call Trace: [ 36.418546] <TASK> [ 36.419320] dump_stack_lvl+0x96/0xd0 [ 36.420522] print_address_description+0x75/0x350 [ 36.421992] print_report+0x11b/0x250 [ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0 [ 36.424806] ? __virt_addr_valid+0xcf/0x170 [ 36.426069] ? worker_thread+0x4a2/0x890 [ 36.427355] kasan_report+0x131/0x160 [ 36.428556] ? worker_thread+0x4a2/0x890 [ 36.430053] worker_thread+0x4a2/0x890 [ 36.431297] ? worker_clr_flags+0x90/0x90 [ 36.432479] kthread+0x166/0x190 [ 36.433493] ? kthread_blkcg+0x50/0x50 [ 36.434669] ret_from_fork+0x22/0x30 [ 36.435923] </TASK> [ 36.436684] [ 36.437215] Allocated by task 24: [ 36.438289] kasan_set_track+0x50/0x80 [ 36.439436] __kasan_kmalloc+0x89/0xa0 [ 36.440566] smsusb_probe+0x374/0xc90 [ 36.441920] usb_probe_interface+0x2d1/0x4c0 [ 36.443253] really_probe+0x1d5/0x580 [ 36.444539] __driver_probe_device+0xe3/0x130 [ 36.446085] driver_probe_device+0x49/0x220 [ 36.447423] __device_attach_driver+0x19e/0x1b0 [ 36.448931] bus_for_each_drv+0xcb/0x110 [ 36.450217] __device_attach+0x132/0x1f0 [ 36.451470] bus_probe_device+0x59/0xf0 [ 36.452563] device_add+0x4ec/0x7b0 [ 36.453830] usb_set_configuration+0xc63/0xe10 [ 36.455230] usb_generic_driver_probe+0x3b/0x80 [ 36.456166] printk: console [ttyGS0] disabled [ 36.456569] usb_probe_device+0x90/0x110 [ 36.459523] really_probe+0x1d5/0x580 [ 36.461027] __driver_probe_device+0xe3/0x130 [ 36.462465] driver_probe_device+0x49/0x220 [ 36.463847] __device_attach_driver+0x19e/0x1b0 [ 36.465229] bus_for_each_drv+0xcb/0x110 [ 36.466466] __device_attach+0x132/0x1f0 [ 36.467799] bus_probe_device+0x59/0xf0 [ 36.469010] device_add+0x4ec/0x7b0 [ 36.470125] usb_new_device+0x863/0xa00 [ 36.471374] hub_event+0x18c7/0x2220 [ 36.472746] process_one_work+0x34c/0x5b0 [ 36.474041] worker_thread+0x4b7/0x890 [ 36.475216] kthread+0x166/0x190 [ 36.476267] ret_from_fork+0x22/0x30 [ 36.477447] [ 36.478160] Freed by task 24: [ 36.479239] kasan_set_track+0x50/0x80 [ 36.480512] kasan_save_free_info+0x2b/0x40 [ 36.481808] ____kasan_slab_free+0x122/0x1a0 [ 36.483173] __kmem_cache_free+0xc4/0x200 [ 36.484563] smsusb_term_device+0xcd/0xf0 [ 36.485896] smsusb_probe+0xc85/0xc90 [ 36.486976] usb_probe_interface+0x2d1/0x4c0 [ 36.488303] really_probe+0x1d5/0x580 [ 36.489498] __driver_probe_device+0xe3/0x130 [ 36.491140] driver_probe_device+0x49/0x220 [ 36.492475] __device_attach_driver+0x19e/0x1b0 [ 36.493988] bus_for_each_drv+0xcb/0x110 [ 36.495171] __device_attach+0x132/0x1f0 [ 36.496617] bus_probe_device+0x59/0xf0 [ 36.497875] device_add+0x4ec/0x7b0 [ 36.498972] usb_set_configuration+0xc63/0xe10 [ 36.500264] usb_generic_driver_probe+0x3b/0x80 [ 36.501740] usb_probe_device+0x90/0x110 [ 36.503084] really_probe+0x1d5/0x580 [ 36.504241] __driver_probe_device+0xe3/0x130 [ 36.505548] driver_probe_device+0x49/0x220 [ 36.506766] __device_attach_driver+0x19e/0x1b0 [ 36.508368] bus_for_each_drv+0xcb/0x110 [ 36.509646] __device_attach+0x132/0x1f0 [ 36.510911] bus_probe_device+0x59/0xf0 [ 36.512103] device_add+0x4ec/0x7b0 [ 36.513215] usb_new_device+0x863/0xa00 [ 36.514736] hub_event+0x18c7/0x2220 [ 36.516130] process_one_work+ ---truncated--- | ||||
| CVE-2023-54269 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: double free xprt_ctxt while still in use When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out of the svc_rqst into the svc_deferred_req. When the deferred request is revisited, the pointer is copied into the new svc_rqst - and also remains in the svc_deferred_req. In the (rare?) case that the request is deferred a second time, the old svc_deferred_req is reused - it still has all the correct content. However in that case the rq_xprt_ctxt pointer is NOT cleared so that when xpo_release_xprt is called, the ctxt is freed (UDP) or possible added to a free list (RDMA). When the deferred request is revisited for a second time, it will reference this ctxt which may be invalid, and the free the object a second time which is likely to oops. So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that the value is now stored in the svc_deferred_req. | ||||
| CVE-2023-54268 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't wake up kswapd from fill_pool() syzbot is reporting a lockdep warning in fill_pool() because the allocation from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM) and therefore tries to wake up kswapd, which acquires kswapd_wait::lock. Since fill_pool() might be called with arbitrary locks held, fill_pool() should not assume that acquiring kswapd_wait::lock is safe. Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for !__GFP_DIRECT_RECLAIM allocation. | ||||
| CVE-2022-49950 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix memory corruption on open The probe session-duplication overflow check incremented the session count also when there were no more available sessions so that memory beyond the fixed-size slab-allocated session array could be corrupted in fastrpc_session_alloc() on open(). | ||||
| CVE-2022-49949 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix memory leak in firmware upload In the case of firmware-upload, an instance of struct fw_upload is allocated in firmware_upload_register(). This data needs to be freed in fw_dev_release(). Create a new fw_upload_free() function in sysfs_upload.c to handle the firmware-upload specific memory frees and incorporate the missing kfree call for the fw_upload structure. | ||||
| CVE-2021-22555 | 4 Brocade, Linux, Netapp and 1 more | 43 Fabric Operating System, Linux Kernel, Aff 500f and 40 more | 2025-12-30 | 8.3 High |
| A heap out-of-bounds write affecting Linux since v2.6.19-rc1 was discovered in net/netfilter/x_tables.c. This allows an attacker to gain privileges or cause a DoS (via heap memory corruption) through user name space | ||||
| CVE-2022-50707 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session() 'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(), and should be freed in the invalid ctrl_status->status error handling case. Otherwise there is a memory leak. | ||||
| CVE-2022-50703 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() There are two refcount leak bugs in qcom_smsm_probe(): (1) The 'local_node' is escaped out from for_each_child_of_node() as the break of iteration, we should call of_node_put() for it in error path or when it is not used anymore. (2) The 'node' is escaped out from for_each_available_child_of_node() as the 'goto', we should call of_node_put() for it in goto target. | ||||
| CVE-2022-50698 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: da7219: Fix an error handling path in da7219_register_dai_clks() If clk_hw_register() fails, the corresponding clk should not be unregistered. To handle errors from loops, clean up partial iterations before doing the goto. So add a clk_hw_unregister(). Then use a while (--i >= 0) loop in the unwind section. | ||||
| CVE-2022-50711 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe() If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called in error path or removing module to free the memory allocated in mtk_wed_add_hw(). | ||||
| CVE-2023-53994 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ionic: remove WARN_ON to prevent panic_on_warn Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. | ||||
| CVE-2023-53987 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ping: Fix potentail NULL deref for /proc/net/icmp. After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. | ||||
| CVE-2023-53997 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: of: fix double-free on unregistration Since commit 3d439b1a2ad3 ("thermal/core: Alloc-copy-free the thermal zone parameters structure"), thermal_zone_device_register() allocates a copy of the tzp argument and frees it when unregistering, so thermal_of_zone_register() now ends up leaking its original tzp and double-freeing the tzp copy. Fix this by locating tzp on stack instead. | ||||
| CVE-2023-54001 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: r8712: Fix memory leak in _r8712_init_xmit_priv() In the above mentioned routine, memory is allocated in several places. If the first succeeds and a later one fails, the routine will leak memory. This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel"). A potential memory leak in r8712_xmit_resource_alloc() is also addressed. | ||||
| CVE-2023-54003 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix GID entry ref leak when create_ah fails If AH create request fails, release sgid_attr to avoid GID entry referrence leak reported while releasing GID table | ||||
| CVE-2023-54004 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 ---truncated--- | ||||
| CVE-2023-54005 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix memory leak in binder_init() In binder_init(), the destruction of binder_alloc_shrinker_init() is not performed in the wrong path, which will cause memory leaks. So this commit introduces binder_alloc_shrinker_exit() and calls it in the wrong path to fix that. | ||||