| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap buffer overflow write vulnerability exists in ReadYUVImage() (coders/yuv.c) when processing malicious YUV 4:2:2 (NoInterlace) images. The pixel-pair loop writes one pixel beyond the allocated row buffer. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, a buffer overread in `freerdp_image_copy_from_icon_data()` (libfreerdp/codec/color.c) can be triggered by crafted RDP Window Icon (TS_ICON_INFO) data. The bug is reachable over the network when a client processes icon data from an RDP server (or from a man-in-the-middle). Version 3.23.0 fixes the issue. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, a malicious RDP server can trigger a heap buffer overflow in FreeRDP clients using the GDI surface pipeline (e.g., `xfreerdp`) by sending an RDPGFX ClearCodec surface command with an out-of-bounds destination rectangle. The `gdi_SurfaceCommand_ClearCodec()` handler does not call `is_within_surface()` to validate the command rectangle against the destination surface dimensions, allowing attacker-controlled `cmd->left`/`cmd->top` (and subcodec rectangle offsets) to reach image copy routines that write into `surface->data` without bounds enforcement. The OOB write corrupts an adjacent `gdiGfxSurface` struct's `codecs*` pointer with attacker-controlled pixel data, and corruption of `codecs*` is sufficient to reach an indirect function pointer call (`NSC_CONTEXT.decode` at `nsc.c:500`) on a subsequent codec command — full instruction pointer (RIP) control demonstrated in exploitability harness. Users should upgrade to version 3.23.0 to receive a patch. |
| A vulnerability in Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient validation when processing specific Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to the management interface of an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
Note: Only the out-of-band (OOB) management interface is affected. |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the LLDP process to restart, which could cause an affected device to reload unexpectedly.
This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). |
| Dell iDRAC Service Module (iSM), versions prior to 6.0.3.0, contains a Buffer Access with Incorrect Length Value vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution and Elevation of privileges. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 2 (`WBIO_USH_GET_IDENTITY`) with an improper `ReceiveBuferSize` value. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 0 (`WBIO_USH_GET_TEMPLATE`) and with either and an invalid `ReceiveBuferSize` and/or an invalid `SendBufferSize`. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 3 (`WBIO_USH_CREATE_CHALLENGE`) with an invalid `ReceiveBuferSize`. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 4 (`WBIO_USH_ADD_RECORD`) and with an invalid `SendBufferSize`. |
| A specially-crafted file can cause libjxl's decoder to write pixel data to uninitialized unallocated memory. Soon after that data from another uninitialized unallocated region is copied to pixel data.
This can be done by requesting color transformation of grayscale images to another grayscale color space. Buffers allocated for 1-float-per-pixel are used as if they are allocated for 3-float-per-pixel. That happens only if LCMS2 is used as CMS engine. There is another CMS engine available (selected by build flags). |
| libtiff up to v4.7.1 was discovered to contain a stack overflow via the readSeparateStripsIntoBuffer function. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Avoid stack buffer overflow from kernel cmdline
While the kernel command line is considered trusted in most environments,
avoid writing 1 byte past the end of "acpiid" if the "str" argument is
maximum length. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu: Avoid running off the end of an AMD erratum table
The NULL array terminator at the end of erratum_1386_microcode was
removed during the switch from x86_cpu_desc to x86_cpu_id. This
causes readers to run off the end of the array.
Replace the NULL. |
| A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, causing a denial of service (DoS) condition.
This vulnerability is due to improper handling of malformed Control and Provisioning of Wireless Access Points (CAPWAP) packets. An attacker could exploit this vulnerability by sending malformed CAPWAP packets through an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| The RandR extension in XFree86 4.2.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcRRQueryVersion, (2) SProcRRGetScreenInfo, (3) SProcRRSelectInput, or (4) SProcRRConfigureOutputProperty function. |
| The XVideo extension in XFree86 4.0.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcXvQueryExtension, (2) SProcXvQueryAdaptors, (3) SProcXvQueryEncodings, (4) SProcXvGrabPort, (5) SProcXvUngrabPort, (6) SProcXvPutVideo, (7) SProcXvPutStill, (8) SProcXvGetVideo, (9) SProcXvGetStill, (10) SProcXvPutImage, (11) SProcXvShmPutImage, (12) SProcXvSelectVideoNotify, (13) SProcXvSelectPortNotify, (14) SProcXvStopVideo, (15) SProcXvSetPortAttribute, (16) SProcXvGetPortAttribute, (17) SProcXvQueryBestSize, (18) SProcXvQueryPortAttributes, (19) SProcXvQueryImageAttributes, or (20) SProcXvListImageFormats function. |
| The GLX extension in XFree86 4.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) __glXDisp_Render, (2) __glXDisp_RenderLarge, (3) __glXDispSwap_VendorPrivate, (4) __glXDispSwap_VendorPrivateWithReply, (5) set_client_info, (6) __glXDispSwap_SetClientInfoARB, (7) DoSwapInterval, (8) DoGetProgramString, (9) DoGetString, (10) __glXDispSwap_RenderMode, (11) __glXDisp_GetCompressedTexImage, (12) __glXDispSwap_GetCompressedTexImage, (13) __glXDisp_FeedbackBuffer, (14) __glXDispSwap_FeedbackBuffer, (15) __glXDisp_SelectBuffer, (16) __glXDispSwap_SelectBuffer, (17) __glXDisp_Flush, (18) __glXDispSwap_Flush, (19) __glXDisp_Finish, (20) __glXDispSwap_Finish, (21) __glXDisp_ReadPixels, (22) __glXDispSwap_ReadPixels, (23) __glXDisp_GetTexImage, (24) __glXDispSwap_GetTexImage, (25) __glXDisp_GetPolygonStipple, (26) __glXDispSwap_GetPolygonStipple, (27) __glXDisp_GetSeparableFilter, (28) __glXDisp_GetSeparableFilterEXT, (29) __glXDisp_GetConvolutionFilter, (30) __glXDisp_GetConvolutionFilterEXT, (31) __glXDisp_GetHistogram, (32) __glXDisp_GetHistogramEXT, (33) __glXDisp_GetMinmax, (34) __glXDisp_GetMinmaxEXT, (35) __glXDisp_GetColorTable, (36) __glXDisp_GetColorTableSGI, (37) GetSeparableFilter, (38) GetConvolutionFilter, (39) GetHistogram, (40) GetMinmax, or (41) GetColorTable function. |
| The Render extension in XFree86 4.0.1, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) ProcRenderQueryVersion, (2) SProcRenderQueryVersion, (3) SProcRenderQueryPictFormats, (4) SProcRenderQueryPictIndexValues, (5) SProcRenderCreatePicture, (6) SProcRenderChangePicture, (7) SProcRenderSetPictureClipRectangles, (8) SProcRenderFreePicture, (9) SProcRenderComposite, (10) SProcRenderScale, (11) SProcRenderCreateGlyphSet, (12) SProcRenderReferenceGlyphSet, (13) SProcRenderFreeGlyphSet, (14) SProcRenderFreeGlyphs, or (15) SProcRenderCompositeGlyphs function. |
| X.Org Server (aka xserver and xorg-server) 1.15.0 through 1.16.x before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) sproc_dri3_query_version, (2) sproc_dri3_open, (3) sproc_dri3_pixmap_from_buffer, (4) sproc_dri3_buffer_from_pixmap, (5) sproc_dri3_fence_from_fd, (6) sproc_dri3_fd_from_fence, (7) proc_present_query_capabilities, (8) sproc_present_query_version, (9) sproc_present_pixmap, (10) sproc_present_notify_msc, (11) sproc_present_select_input, or (12) sproc_present_query_capabilities function in the (a) DRI3 or (b) Present extension. |
