| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470 |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock()
Even though we check that we "should" be able to do lc_get_cumulative()
while holding the device->al_lock spinlock, it may still fail,
if some other code path decided to do lc_try_lock() with bad timing.
If that happened, we logged "LOGIC BUG for enr=...",
but still did not return an error.
The rest of the code now assumed that this request has references
for the relevant activity log extents.
The implcations are that during an active resync, mutual exclusivity of
resync versus application IO is not guaranteed. And a potential crash
at this point may not realizs that these extents could have been target
of in-flight IO and would need to be resynced just in case.
Also, once the request completes, it will give up activity log references it
does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put().
Fix:
Do not crash the kernel for a condition that is harmless during normal
operation: also catch "e->refcnt == 0", not only "e == NULL"
when being noisy about "al_complete_io() called on inactive extent %u\n".
And do not try to be smart and "guess" whether something will work, then
be surprised when it does not.
Deal with the fact that it may or may not work. If it does not, remember a
possible "partially in activity log" state (only possible for requests that
cross extent boundaries), and return an error code from
drbd_al_begin_io_nonblock().
A latter call for the same request will then resume from where we left off. |
| Squid is a caching proxy for the Web. Prior to version 7.5, due to premature release of resource during expected lifetime and heap Use-After-Free bugs, Squid is vulnerable to Denial of Service when handling ICP traffic. This problem allows a remote attacker to perform a reliable and repeatable Denial of Service attack against the Squid service using ICP protocol. This attack is limited to Squid deployments that explicitly enable ICP support (i.e. configure non-zero `icp_port`). This problem _cannot_ be mitigated by denying ICP queries using `icp_access` rules. This bug is fixed in Squid version 7.5. |
| A race condition vulnerability was found in the vmwgfx driver in the Linux kernel. The flaw exists within the handling of GEM objects. The issue results from improper locking when performing operations on an object. This flaw allows a local privileged user to disclose information in the context of the kernel. |
| Pterodactyl is a free, open-source game server management panel. Pterodactyl implements rate limits that are applied to the total number of resources (e.g. databases, port allocations, or backups) that can exist for an individual server. These resource limits are applied on a per-server basis, and validated during the request cycle. However, in versions prior to 1.12.0, it is possible for a malicious user to send a massive volume of requests at the same time that would create more resources than the server is allotted. This is because the validation occurs early in the request cycle and does not lock the target resource while it is processing. As a result sending a large volume of requests at the same time would lead all of those requests to validate as not using any of the target resources, and then all creating the resources at the same time. As a result a server would be able to create more databases, allocations, or backups than configured. A malicious user is able to deny resources to other users on the system, and may be able to excessively consume the limited allocations for a node, or fill up backup space faster than is allowed by the system. Version 1.12.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
reiserfs: Avoid touching renamed directory if parent does not change
The VFS will not be locking moved directory if its parent does not
change. Change reiserfs rename code to avoid touching renamed directory
if its parent does not change as without locking that can corrupt the
filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: Avoid touching renamed directory if parent does not change
The VFS will not be locking moved directory if its parent does not
change. Change ocfs2 rename code to avoid touching renamed directory if
its parent does not change as without locking that can corrupt the
filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: use a dedicated spinlock for trans_fd
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine) |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: avoid kernel hung in hinic_get_stats64()
When using hinic device as a bond slave device, and reading device stats
of master bond device, the kernel may hung.
The kernel panic calltrace as follows:
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
native_queued_spin_lock_slowpath+0x1ec/0x31c
dev_get_stats+0x60/0xcc
dev_seq_printf_stats+0x40/0x120
dev_seq_show+0x1c/0x40
seq_read_iter+0x3c8/0x4dc
seq_read+0xe0/0x130
proc_reg_read+0xa8/0xe0
vfs_read+0xb0/0x1d4
ksys_read+0x70/0xfc
__arm64_sys_read+0x20/0x30
el0_svc_common+0x88/0x234
do_el0_svc+0x2c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
And the calltrace of task that actually caused kernel hungs as follows:
__switch_to+124
__schedule+548
schedule+72
schedule_timeout+348
__down_common+188
__down+24
down+104
hinic_get_stats64+44 [hinic]
dev_get_stats+92
bond_get_stats+172 [bonding]
dev_get_stats+92
dev_seq_printf_stats+60
dev_seq_show+24
seq_read_iter+964
seq_read+220
proc_reg_read+164
vfs_read+172
ksys_read+108
__arm64_sys_read+28
el0_svc_common+132
do_el0_svc+40
el0_svc+24
el0_sync_handler+164
el0_sync+324
When getting device stats from bond, kernel will call bond_get_stats().
It first holds the spinlock bond->stats_lock, and then call
hinic_get_stats64() to collect hinic device's stats.
However, hinic_get_stats64() calls `down(&nic_dev->mgmt_lock)` to
protect its critical section, which may schedule current task out.
And if system is under high pressure, the task cannot be woken up
immediately, which eventually triggers kernel hung panic.
Since previous patch has replaced hinic_dev.tx_stats/rx_stats with local
variable in hinic_get_stats64(), there is nothing need to be protected
by lock, so just removing down()/up() is ok. |
| Inadequate lock protection within Xilinx Run time may allow a local attacker to trigger a Use-After-Free condition potentially resulting in loss of confidentiality or availability |
| A flaw was found in the Linux kernel's ksmbd component. A deadlock is triggered by sending multiple concurrent session setup requests, possibly leading to a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix locking in rxrpc's sendmsg
Fix three bugs in the rxrpc's sendmsg implementation:
(1) rxrpc_new_client_call() should release the socket lock when returning
an error from rxrpc_get_call_slot().
(2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
held in the event that we're interrupted by a signal whilst waiting
for tx space on the socket or relocking the call mutex afterwards.
Fix this by: (a) moving the unlock/lock of the call mutex up to
rxrpc_send_data() such that the lock is not held around all of
rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
whether we're return with the lock dropped. Note that this means
recvmsg() will not block on this call whilst we're waiting.
(3) After dropping and regaining the call mutex, rxrpc_send_data() needs
to go and recheck the state of the tx_pending buffer and the
tx_total_len check in case we raced with another sendmsg() on the same
call.
Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait
for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.
Without fix (2), something like the following can be induced:
WARNING: bad unlock balance detected!
5.16.0-rc6-syzkaller #0 Not tainted
-------------------------------------
syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor011/3597.
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
__lock_release kernel/locking/lockdep.c:5306 [inline]
lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
__mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pci: Fix get_phb_number() locking
The recent change to get_phb_number() causes a DEBUG_ATOMIC_SLEEP
warning on some systems:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
1 lock held by swapper/1:
#0: c157efb0 (hose_spinlock){+.+.}-{2:2}, at: pcibios_alloc_controller+0x64/0x220
Preemption disabled at:
[<00000000>] 0x0
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0-yocto-standard+ #1
Call Trace:
[d101dc90] [c073b264] dump_stack_lvl+0x50/0x8c (unreliable)
[d101dcb0] [c0093b70] __might_resched+0x258/0x2a8
[d101dcd0] [c0d3e634] __mutex_lock+0x6c/0x6ec
[d101dd50] [c0a84174] of_alias_get_id+0x50/0xf4
[d101dd80] [c002ec78] pcibios_alloc_controller+0x1b8/0x220
[d101ddd0] [c140c9dc] pmac_pci_init+0x198/0x784
[d101de50] [c140852c] discover_phbs+0x30/0x4c
[d101de60] [c0007fd4] do_one_initcall+0x94/0x344
[d101ded0] [c1403b40] kernel_init_freeable+0x1a8/0x22c
[d101df10] [c00086e0] kernel_init+0x34/0x160
[d101df30] [c001b334] ret_from_kernel_thread+0x5c/0x64
This is because pcibios_alloc_controller() holds hose_spinlock but
of_alias_get_id() takes of_mutex which can sleep.
The hose_spinlock protects the phb_bitmap, and also the hose_list, but
it doesn't need to be held while get_phb_number() calls the OF routines,
because those are only looking up information in the device tree.
So fix it by having get_phb_number() take the hose_spinlock itself, only
where required, and then dropping the lock before returning.
pcibios_alloc_controller() then needs to take the lock again before the
list_add() but that's safe, the order of the list is not important. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: trans_fd/p9_conn_cancel: drop client lock earlier
syzbot reported a double-lock here and we no longer need this
lock after requests have been moved off to local list:
just drop the lock earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()
Lockdep detects the following issue on led-backlight removal:
[ 142.315935] ------------[ cut here ]------------
[ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80
...
[ 142.500725] Call trace:
[ 142.503176] led_sysfs_enable+0x54/0x80 (P)
[ 142.507370] led_bl_remove+0x80/0xa8 [led_bl]
[ 142.511742] platform_remove+0x30/0x58
[ 142.515501] device_remove+0x54/0x90
...
Indeed, led_sysfs_enable() has to be called with the led_access
lock held.
Hold the lock when calling led_sysfs_disable(). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: avoid possible crash when edev->pdev changes
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix sleeping in invalid context in die()
die() can be called in exception handler, and therefore cannot sleep.
However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled.
That causes the following warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex
preempt_count: 110001, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
dump_backtrace+0x1c/0x24
show_stack+0x2c/0x38
dump_stack_lvl+0x5a/0x72
dump_stack+0x14/0x1c
__might_resched+0x130/0x13a
rt_spin_lock+0x2a/0x5c
die+0x24/0x112
do_trap_insn_illegal+0xa0/0xea
_new_vmalloc_restore_context_a0+0xcc/0xd8
Oops - illegal instruction [#1]
Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT
enabled. |
| An Improper Resource Locking vulnerability in the SDM component of B&R Automation Runtime versions before 6.3 and before Q4.93 may allow an unauthenticated network-based attacker to delete data causing denial of service conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: max3100: Lock port->lock when calling uart_handle_cts_change()
uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:
WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
...
Workqueue: max3100-0 max3100_work [max3100]
RIP: 0010:uart_handle_cts_change+0xa6/0xb0
...
max3100_handlerx+0xc5/0x110 [max3100]
max3100_work+0x12a/0x340 [max3100] |
