| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Intel EPT paging code uses an optimization to defer flushing of any cached
EPT state until the p2m lock is dropped, so that multiple modifications done
under the same locked region only issue a single flush.
Freeing of paging structures however is not deferred until the flushing is
done, and can result in freed pages transiently being present in cached state.
Such stale entries can point to memory ranges not owned by the guest, thus
allowing access to unintended memory regions. |
| Any guest issuing a Xenstore command accessing a node using the
(illegal) node path "/local/domain/", will crash xenstored due to a
clobbered error indicator in xenstored when verifying the node path.
Note that the crash is forced via a failing assert() statement in
xenstored. In case xenstored is being built with NDEBUG #defined,
an unprivileged guest trying to access the node path "/local/domain/"
will result in it no longer being serviced by xenstored, other guests
(including dom0) will still be serviced, but xenstored will use up
all cpu time it can get. |
| Shadow mode tracing code uses a set of per-CPU variables to avoid
cumbersome parameter passing. Some of these variables are written to
with guest controlled data, of guest controllable size. That size can
be larger than the variable, and bounding of the writes was missing. |
| In the context switch logic Xen attempts to skip an IBPB in the case of
a vCPU returning to a CPU on which it was the previous vCPU to run.
While safe for Xen's isolation between vCPUs, this prevents the guest
kernel correctly isolating between tasks. Consider:
1) vCPU runs on CPU A, running task 1.
2) vCPU moves to CPU B, idle gets scheduled on A. Xen skips IBPB.
3) On CPU B, guest kernel switches from task 1 to 2, issuing IBPB.
4) vCPU moves back to CPU A. Xen skips IBPB again.
Now, task 2 is running on CPU A with task 1's training still in the BTB. |
| When passing through PCI devices, the detach logic in libxl won't remove
access permissions to any 64bit memory BARs the device might have. As a
result a domain can still have access any 64bit memory BAR when such
device is no longer assigned to the domain.
For PV domains the permission leak allows the domain itself to map the memory
in the page-tables. For HVM it would require a compromised device model or
stubdomain to map the leaked memory into the HVM domain p2m. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
Some Viridian hypercalls can specify a mask of vCPU IDs as an input, in
one of three formats. Xen has boundary checking bugs with all three
formats, which can cause out-of-bounds reads and writes while processing
the inputs.
* CVE-2025-58147. Hypercalls using the HV_VP_SET Sparse format can
cause vpmask_set() to write out of bounds when converting the bitmap
to Xen's format.
* CVE-2025-58148. Hypercalls using any input format can cause
send_ipi() to read d->vcpu[] out-of-bounds, and operate on a wild
vCPU pointer. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
Some Viridian hypercalls can specify a mask of vCPU IDs as an input, in
one of three formats. Xen has boundary checking bugs with all three
formats, which can cause out-of-bounds reads and writes while processing
the inputs.
* CVE-2025-58147. Hypercalls using the HV_VP_SET Sparse format can
cause vpmask_set() to write out of bounds when converting the bitmap
to Xen's format.
* CVE-2025-58148. Hypercalls using any input format can cause
send_ipi() to read d->vcpu[] out-of-bounds, and operate on a wild
vCPU pointer. |
| An optional feature of PCI MSI called "Multiple Message" allows a
device to use multiple consecutive interrupt vectors. Unlike for MSI-X,
the setting up of these consecutive vectors needs to happen all in one
go. In this handling an error path could be taken in different
situations, with or without a particular lock held. This error path
wrongly releases the lock even when it is not currently held.
|
| When setting up interrupt remapping for legacy PCI(-X) devices,
including PCI(-X) bridges, a lookup of the upstream bridge is required.
This lookup, itself involving acquiring of a lock, is done in a context
where acquiring that lock is unsafe. This can lead to a deadlock. |
| Certain instructions need intercepting and emulating by Xen. In some
cases Xen emulates the instruction by replaying it, using an executable
stub. Some instructions may raise an exception, which is supposed to be
handled gracefully. Certain replayed instructions have additional logic
to set up and recover the changes to the arithmetic flags.
For replayed instructions where the flags recovery logic is used, the
metadata for exception handling was incorrect, preventing Xen from
handling the the exception gracefully, treating it as fatal instead. |
| Unlike 32-bit PV guests, HVM guests may switch freely between 64-bit and
other modes. This in particular means that they may set registers used
to pass 32-bit-mode hypercall arguments to values outside of the range
32-bit code would be able to set them to.
When processing of hypercalls takes a considerable amount of time,
the hypervisor may choose to invoke a hypercall continuation. Doing so
involves putting (perhaps updated) hypercall arguments in respective
registers. For guests not running in 64-bit mode this further involves
a certain amount of translation of the values.
Unfortunately internal sanity checking of these translated values
assumes high halves of registers to always be clear when invoking a
hypercall. When this is found not to be the case, it triggers a
consistency check in the hypervisor and causes a crash.
|
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
There are two issues related to the mapping of pages belonging to other
domains: For one, an assertion is wrong there, where the case actually
needs handling. A NULL pointer de-reference could result on a release
build. This is CVE-2025-58144.
And then the P2M lock isn't held until a page reference was actually
obtained (or the attempt to do so has failed). Otherwise the page can
not only change type, but even ownership in between, thus allowing
domain boundaries to be violated. This is CVE-2025-58145. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
There are two issues related to the mapping of pages belonging to other
domains: For one, an assertion is wrong there, where the case actually
needs handling. A NULL pointer de-reference could result on a release
build. This is CVE-2025-58144.
And then the P2M lock isn't held until a page reference was actually
obtained (or the attempt to do so has failed). Otherwise the page can
not only change type, but even ownership in between, thus allowing
domain boundaries to be violated. This is CVE-2025-58145. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
There are multiple issues related to the handling and accessing of guest
memory pages in the viridian code:
1. A NULL pointer dereference in the updating of the reference TSC area.
This is CVE-2025-27466.
2. A NULL pointer dereference by assuming the SIM page is mapped when
a synthetic timer message has to be delivered. This is
CVE-2025-58142.
3. A race in the mapping of the reference TSC page, where a guest can
get Xen to free a page while still present in the guest physical to
machine (p2m) page tables. This is CVE-2025-58143. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
There are multiple issues related to the handling and accessing of guest
memory pages in the viridian code:
1. A NULL pointer dereference in the updating of the reference TSC area.
This is CVE-2025-27466.
2. A NULL pointer dereference by assuming the SIM page is mapped when
a synthetic timer message has to be delivered. This is
CVE-2025-58142.
3. A race in the mapping of the reference TSC page, where a guest can
get Xen to free a page while still present in the guest physical to
machine (p2m) page tables. This is CVE-2025-58143. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
There are multiple issues related to the handling and accessing of guest
memory pages in the viridian code:
1. A NULL pointer dereference in the updating of the reference TSC area.
This is CVE-2025-27466.
2. A NULL pointer dereference by assuming the SIM page is mapped when
a synthetic timer message has to be delivered. This is
CVE-2025-58142.
3. A race in the mapping of the reference TSC page, where a guest can
get Xen to free a page while still present in the guest physical to
machine (p2m) page tables. This is CVE-2025-58143. |
| Closing of an event channel in the Linux kernel can result in a deadlock.
This happens when the close is being performed in parallel to an unrelated
Xen console action and the handling of a Xen console interrupt in an
unprivileged guest.
The closing of an event channel is e.g. triggered by removal of a
paravirtual device on the other side. As this action will cause console
messages to be issued on the other side quite often, the chance of
triggering the deadlock is not neglectable.
Note that 32-bit Arm-guests are not affected, as the 32-bit Linux kernel
on Arm doesn't use queued-RW-locks, which are required to trigger the
issue (on Arm32 a waiting writer doesn't block further readers to get
the lock). |
| The fix for XSA-423 added logic to Linux'es netback driver to deal with
a frontend splitting a packet in a way such that not all of the headers
would come in one piece. Unfortunately the logic introduced there
didn't account for the extreme case of the entire packet being split
into as many pieces as permitted by the protocol, yet still being
smaller than the area that's specially dealt with to keep all (possible)
headers together. Such an unusual packet would therefore trigger a
buffer overrun in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: fix crash when removing device
When removing a netfront device directly after a suspend/resume cycle
it might happen that the queues have not been setup again, causing a
crash during the attempt to stop the queues another time.
Fix that by checking the queues are existing before trying to stop
them.
This is XSA-465 / CVE-2024-53240. |
| PVH guests have their ACPI tables constructed by the toolstack. The
construction involves building the tables in local memory, which are
then copied into guest memory. While actually used parts of the local
memory are filled in correctly, excess space that is being allocated is
left with its prior contents. |
