| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: don't hold ni_lock when calling truncate_setsize()
syzbot is reporting hung task at do_user_addr_fault() [1], for there is
a silent deadlock between PG_locked bit and ni_lock lock.
Since filemap_update_page() calls filemap_read_folio() after calling
folio_trylock() which will set PG_locked bit, ntfs_truncate() must not
call truncate_setsize() which will wait for PG_locked bit to be cleared
when holding ni_lock lock. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Fix use after free for wext
Key information in wext.connect is not reset on (re)connect and can hold
data from a previous connection.
Reset key data to avoid that drivers or mac80211 incorrectly detect a
WEP connection request and access the freed or already reused memory.
Additionally optimize cfg80211_sme_connect() and avoid an useless
schedule of conn_work. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix calltrace warning in amddrm_buddy_fini
The following call trace is observed when removing the amdgpu driver, which
is caused by that BOs allocated for psp are not freed until removing.
[61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy]
[61811.450577] Call Trace:
[61811.450577] <TASK>
[61811.450579] amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu]
[61811.450728] amdgpu_ttm_fini+0x207/0x290 [amdgpu]
[61811.450870] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[61811.451012] gmc_v9_0_sw_fini+0x4a/0x60 [amdgpu]
[61811.451166] amdgpu_device_fini_sw+0x117/0x520 [amdgpu]
[61811.451306] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[61811.451447] devm_drm_dev_init_release+0x4d/0x80 [drm]
[61811.451466] devm_action_release+0x15/0x20
[61811.451469] release_nodes+0x40/0xb0
[61811.451471] devres_release_all+0x9b/0xd0
[61811.451473] __device_release_driver+0x1bb/0x2a0
[61811.451476] driver_detach+0xf3/0x140
[61811.451479] bus_remove_driver+0x6c/0xf0
[61811.451481] driver_unregister+0x31/0x60
[61811.451483] pci_unregister_driver+0x40/0x90
[61811.451486] amdgpu_exit+0x15/0x447 [amdgpu]
For smu v13_0_2, if the GPU supports xgmi, refer to
commit f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2"),
it will run gpu recover in AMDGPU_RESET_FOR_DEVICE_REMOVE mode when removing,
which makes all devices in hive list have hw reset but no resume except the
basic ip blocks, then other ip blocks will not call .hw_fini according to
ip_block.status.hw.
Since psp_free_shared_bufs just includes some software operations, so move
it to psp_sw_fini. |
| The Featured Image from URL (FIFU) plugin for WordPress is vulnerable to SQL Injection via the get_posts_with_internal_featured_image() function in all versions up to, and including, 5.2.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Featured Image from URL (FIFU) plugin for WordPress is vulnerable to SQL Injection via the get_all_urls() function in all versions up to, and including, 5.2.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Wp cycle text announcement plugin for WordPress is vulnerable to SQL Injection via the 'cycle-text' shortcode in all versions up to, and including, 8.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Woo superb slideshow transition gallery with random effect plugin for WordPress is vulnerable to SQL Injection via the 'woo-superb-slideshow' shortcode in all versions up to, and including, 9.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Charitable – Donation Plugin for WordPress – Fundraising with Recurring Donations & More plugin for WordPress is vulnerable to SQL Injection via the donation_ids parameter in all versions up to, and including, 1.8.8.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation of the vulnerability requires a paid donation. |
| Nagios XI versions prior to 2012R1.3 contain a SQL injection vulnerability in the legacy Core Configuration Manager (CCM) interface. Authenticated users could manipulate SQL queries by supplying crafted input to specific CCM parameters, potentially allowing access to configuration data stored in the application database. Successful exploitation could disclose or modify notification data and, in some cases, impact the application database more broadly. |
| Nagios XI versions prior to 5.6.14 contain a post-authentication SQL injection vulnerability in the SNMP Trap Interface page. Exploitation requires an account with administrative privileges to access the affected interface. A user with administrative access could supply crafted input that is not properly sanitized, allowing SQL injection that may lead to unauthorized disclosure or modification of application data or execution of arbitrary SQL commands against the backend database. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp
needs to be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: handle the error returned from sctp_auth_asoc_init_active_key
When it returns an error from sctp_auth_asoc_init_active_key(), the
active_key is actually not updated. The old sh_key will be freeed
while it's still used as active key in asoc. Then an use-after-free
will be triggered when sending patckets, as found by syzbot:
sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
sctp_set_owner_w net/sctp/socket.c:132 [inline]
sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863
sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
This patch is to fix it by not replacing the sh_key when it returns
errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key().
For sctp_auth_set_active_key(), old active_key_id will be set back
to asoc->active_key_id when the same thing happens. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: fix possible UAF when kfifo_alloc() fails
If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free
priv. But priv is still in the chdev->file_list, then list traversal
may cause UAF. This fixes the following smatch warning:
drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@34/tcpc/connector
The 'fwnode' set in tcpci_parse_config() which is called
in tcpci_register_port(), its node refcount is increased
in device_get_named_child_node(). It needs be put while
exiting, so call fwnode_handle_put() in the error path of
tcpci_register_port() and in tcpci_unregister_port() to
avoid leak. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
Can not set the @shared_hcd to NULL before decrease the usage count
by usb_put_hcd(), this will cause the shared hcd not released. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry
When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with
obtaining a folio and accessing it even though the entry is swp_entry_t.
Add the missing check and let split_huge_pmd() handle migration entries.
While at it also remove unnecessary folio check.
[surenb@google.com: remove extra folio check, per David] |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Prevent ALIGN() overflow
When allocating IOVA the candidate range gets aligned to the target
alignment. If the range is close to ULONG_MAX then the ALIGN() can
wrap resulting in a corrupted iova.
Open code the ALIGN() using get_add_overflow() to prevent this.
This simplifies the checks as we don't need to check for length earlier
either.
Consolidate the two copies of this code under a single helper.
This bug would allow userspace to create a mapping that overlaps with some
other mapping or a reserved range. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: add cluster chain loop check for dir
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop. |
