| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: add cluster chain loop check for dir
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Make dma-fences compliant with the safe access rules
Xe can free some of the data pointed to by the dma-fences it exports. Most
notably the timeline name can get freed if userspace closes the associated
submit queue. At the same time the fence could have been exported to a
third party (for example a sync_fence fd) which will then cause an use-
after-free on subsequent access.
To make this safe we need to make the driver compliant with the newly
documented dma-fence rules. Driver has to ensure a RCU grace period
between signalling a fence and freeing any data pointed to by said fence.
For the timeline name we simply make the queue be freed via kfree_rcu and
for the shared lock associated with multiple queues we add a RCU grace
period before freeing the per GT structure holding the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lapbether: ignore ops-locked netdevs
Syzkaller managed to trigger lock dependency in xsk_notify via
register_netdevice. As discussed in [0], using register_netdevice
in the notifiers is problematic so skip adding lapbeth for ops-locked
devices.
xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645
notifier_call_chain+0xbc/0x410 kernel/notifier.c:85
call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230
call_netdevice_notifiers_extack net/core/dev.c:2268 [inline]
call_netdevice_notifiers net/core/dev.c:2282 [inline]
unregister_netdevice_many_notify+0xf9d/0x2700 net/core/dev.c:12077
unregister_netdevice_many net/core/dev.c:12140 [inline]
unregister_netdevice_queue+0x305/0x3f0 net/core/dev.c:11984
register_netdevice+0x18f1/0x2270 net/core/dev.c:11149
lapbeth_new_device drivers/net/wan/lapbether.c:420 [inline]
lapbeth_device_event+0x5b1/0xbe0 drivers/net/wan/lapbether.c:462
notifier_call_chain+0xbc/0x410 kernel/notifier.c:85
call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230
call_netdevice_notifiers_extack net/core/dev.c:2268 [inline]
call_netdevice_notifiers net/core/dev.c:2282 [inline]
__dev_notify_flags+0x12c/0x2e0 net/core/dev.c:9497
netif_change_flags+0x108/0x160 net/core/dev.c:9526
dev_change_flags+0xba/0x250 net/core/dev_api.c:68
devinet_ioctl+0x11d5/0x1f50 net/ipv4/devinet.c:1200
inet_ioctl+0x3a7/0x3f0 net/ipv4/af_inet.c:1001
0: https://lore.kernel.org/netdev/20250625140357.6203d0af@kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: arm/poly1305: Fix register corruption in no-SIMD contexts
Restore the SIMD usability check that was removed by commit 773426f4771b
("crypto: arm/poly1305 - Add block-only interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use may_use_simd() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl()
The UIC completion interrupt may be disabled while an UIC command is
being processed. When the UIC completion interrupt is reenabled, an UIC
interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit.
Hence this patch that removes this kernel warning. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: arm64/poly1305: Fix register corruption in no-SIMD contexts
Restore the SIMD usability check that was removed by commit a59e5468a921
("crypto: arm64/poly1305 - Add block-only interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use may_use_simd() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/af_unix: defer registered files gc to io_uring release
Instead of putting io_uring's registered files in unix_gc() we want it
to be done by io_uring itself. The trick here is to consider io_uring
registered files for cycle detection but not actually putting them down.
Because io_uring can't register other ring instances, this will remove
all refs to the ring file triggering the ->release path and clean up
with io_ring_ctx_free().
[axboe: add kerneldoc comment to skb, fold in skb leak fix] |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Drupal core allows Forceful Browsing.This issue affects Drupal core: from 8.0.0 before 10.4.9, from 10.5.0 before 10.5.6, from 11.0.0 before 11.1.9, from 11.2.0 before 11.2.8. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Protect against send buffer overflow in NFSv2 READDIR
Restore the previous limit on the @count argument to prevent a
buffer overflow attack. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Fix crash on isr after kexec()
If the system is rebooted via isr(), the IRQ handler might
be triggered before the domain is initialized. Resulting on
an invalid memory access error.
Fix:
[ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070
[ 0.501166] Call trace:
[ 0.501174] report_iommu_fault+0x28/0xfc
[ 0.501180] mtk_iommu_isr+0x10c/0x1c0
[ joro: Fixed spelling in commit message ] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom: fix writes in read-only memory region
This commit fixes a kernel oops because of a write in some read-only memory:
[ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[ 9.269161] Call trace:
[ 9.276271] __memcpy+0x5c/0x230
[ 9.278531] snprintf+0x58/0x80
[ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190
[ 9.284869] qcom_cpufreq_probe+0xc8/0x39c
..snip..
The following line defines a pointer that point to a char buffer stored
in read-only memory:
char *pvs_name = "speedXX-pvsXX-vXX";
This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
speed, pvs, pvs_ver);
To fix this issue, we instead store the template name onto the stack by
using the following syntax:
char pvs_name_buffer[] = "speedXX-pvsXX-vXX";
Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable. |
| In the Linux kernel, the following vulnerability has been resolved:
android: binder: stop saving a pointer to the VMA
Do not record a pointer to a VMA outside of the mmap_lock for later use.
This is unsafe and there are a number of failure paths *after* the
recorded VMA pointer may be freed during setup. There is no callback to
the driver to clear the saved pointer from generic mm code. Furthermore,
the VMA pointer may become stale if any number of VMA operations end up
freeing the VMA so saving it was fragile to being with.
Instead, change the binder_alloc struct to record the start address of the
VMA and use vma_lookup() to get the vma when needed. Add lockdep
mmap_lock checks on updates to the vma pointer to ensure the lock is held
and depend on that lock for synchronization of readers and writers - which
was already the case anyways, so the smp_wmb()/smp_rmb() was not
necessary.
[akpm@linux-foundation.org: fix drivers/android/binder_alloc_selftest.c] |
| The Flock Safety Android Collins application (aka com.flocksafety.android.collins) 6.35.31 for Android lacks authentication. It is responsible for the camera feed on Falcon, Sparrow, and Bravo devices, but exposes administrative API endpoints on port 8080 without authentication. Endpoints include but are not limited to: /reboot, /logs, /crashpack, and /adb/enable. This results in multiple impacts including denial of service (DoS) via /reboot, information disclosure via /logs, and remote code execution (RCE) via /adb/enable. The latter specifically results in adb being started over TCP without debugging confirmation, providing an attacker in the LAN/WLAN with shell access. |
| The Flock Safety Peripheral com.flocksafety.android.peripheral application 7.38.3 for Android (installed on Falcon and Sparrow License Plate Readers and Bravo Edge AI Compute Devices) contains a cleartext DataDog API key within in its codebase. Because application binaries can be trivially decompiled or inspected, attackers can recover the OAuth secret without special privileges. This secret is intended to remain confidential and should never be embedded directly in client-side software. |
| Dataease is an open source data visualization analysis tool. Versions prior to 2.10.17 are vulnerable to JNDI injection. A blacklist was added in the patch for version 2.10.14. However, JNDI injection remains possible via the iiop, corbaname, and iiopname schemes. The vulnerability has been fixed in version 2.10.17. |
| A vulnerability was detected in Bdtask Pharmacy Management System up to 9.4. Affected is an unknown function of the file /user/edit_user/ of the component User Profile Handler. Performing manipulation results in authorization bypass. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The WP Directory Kit plugin for WordPress is vulnerable to SQL Injection via the 'columns_search' parameter of the select_2_ajax() function in all versions up to, and including, 1.4.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The LearnPress – WordPress LMS Plugin plugin for WordPress is vulnerable to Sensitive Information Disclosure in all versions up to, and including, 4.2.9.4. This is due to missing capability checks in the REST endpoint /wp-json/lp/v1/load_content_via_ajax which allows arbitrary callback execution of admin-only template methods. This makes it possible for unauthenticated attackers to retrieve admin curriculum HTML, quiz questions with correct answers, course materials, and other sensitive educational content via the REST API endpoint granted they can supply valid numeric IDs. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 18.4 before 18.4.3, and 18.5 before 18.5.1 that under certain conditions could have allowed authenticated users to gain unauthorized project access by exploiting the access request approval workflow. |
| A vulnerability was identified in Chengdu Everbrite Network Technology BeikeShop up to 1.5.5. This vulnerability affects the function exportZip of the file /admin/file_manager/export. Such manipulation of the argument path leads to path traversal. The attack can be launched remotely. The exploit is publicly available and might be used. Upgrading to version 1.6.0 is able to resolve this issue. It is suggested to upgrade the affected component. |
