| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump
Syzkaller has reported a NULL pointer dereference when accessing
rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating
rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in
gfs2_rgrp_dump() to prevent that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pvrusb2: fix use after free on context disconnection
Upon module load, a kthread is created targeting the
pvr2_context_thread_func function, which may call pvr2_context_destroy
and thus call kfree() on the context object. However, that might happen
before the usb hub_event handler is able to notify the driver. This
patch adds a sanity check before the invalid read reported by syzbot,
within the context disconnection call stack. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix use after free in lec_send()
The ->send() operation frees skb so save the length before calling
->send() to avoid a use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Fix UAF in key_put()
Once a key's reference count has been reduced to 0, the garbage collector
thread may destroy it at any time and so key_put() is not allowed to touch
the key after that point. The most key_put() is normally allowed to do is
to touch key_gc_work as that's a static global variable.
However, in an effort to speed up the reclamation of quota, this is now
done in key_put() once the key's usage is reduced to 0 - but now the code
is looking at the key after the deadline, which is forbidden.
Fix this by using a flag to indicate that a key can be gc'd now rather than
looking at the key's refcount in the garbage collector. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array
The loop that detects/populates cache information already has a bounds
check on the array size but does not account for cache levels with
separate data/instructions cache. Fix this by incrementing the index
for any populated leaf (instead of any populated level). |
| In the Linux kernel, the following vulnerability has been resolved:
ndisc: use RCU protection in ndisc_alloc_skb()
ndisc_alloc_skb() can be called without RTNL or RCU being held.
Add RCU protection to avoid possible UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: extend RCU protection in igmp6_send()
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection. |
| In the Linux kernel, the following vulnerability has been resolved:
padata: fix UAF in padata_reorder
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ |
| In the Linux kernel, the following vulnerability has been resolved:
can: etas_es58x: es58x_rx_err_msg(): fix memory leak in error path
In es58x_rx_err_msg(), if can->do_set_mode() fails, the function
directly returns without calling netif_rx(skb). This means that the
skb previously allocated by alloc_can_err_skb() is not freed. In other
terms, this is a memory leak.
This patch simply removes the return statement in the error branch and
let the function continue.
Issue was found with GCC -fanalyzer, please follow the link below for
details. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Revert "block, bfq: honor already-setup queue merges""
A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").
So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU
Zap both valid and invalid roots when zapping/unmapping a gfn range, as
KVM must ensure it holds no references to the freed page after returning
from the unmap operation. Most notably, the TDP MMU doesn't zap invalid
roots in mmu_notifier callbacks. This leads to use-after-free and other
issues if the mmu_notifier runs to completion while an invalid root
zapper yields as KVM fails to honor the requirement that there must be
_no_ references to the page after the mmu_notifier returns.
The bug is most easily reproduced by hacking KVM to cause a collision
between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug
exists between kvm_mmu_notifier_invalidate_range_start() and memslot
updates as well. Invalidating a root ensures pages aren't accessible by
the guest, and KVM won't read or write page data itself, but KVM will
trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing
a zap of an invalid root _after_ the mmu_notifier returns is fatal.
WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm]
RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm]
Call Trace:
<TASK>
kvm_set_pfn_dirty+0xa8/0xe0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
zap_gfn_range+0x1f3/0x310 [kvm]
kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm]
kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm]
set_nx_huge_pages+0xb4/0x190 [kvm]
param_attr_store+0x70/0x100
module_attr_store+0x19/0x30
kernfs_fop_write_iter+0x119/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1cc/0x270
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix a user-after-free in add_pble_prm
When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE
info list.
Add the chunk entry to the PBLE info list only after successful setting of
the SD in irdma_hmc_sd_one. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Fix string overflow in SCPI genpd driver
Without the bound checks for scpi_pd->name, it could result in the buffer
overflow when copying the SCPI device name from the corresponding device
tree node as the name string is set at maximum size of 30.
Let us fix it by using devm_kasprintf so that the string buffer is
allocated dynamically. |
| In the Linux kernel, the following vulnerability has been resolved:
net: netlink: af_netlink: Prevent empty skb by adding a check on len.
Adding a check on len parameter to avoid empty skb. This prevents a
division error in netem_enqueue function which is caused when skb->len=0
and skb->data_len=0 in the randomized corruption step as shown below.
skb->data[prandom_u32() % skb_headlen(skb)] ^= 1<<(prandom_u32() % 8);
Crash Report:
[ 343.170349] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family
0 port 6081 - 0
[ 343.216110] netem: version 1.3
[ 343.235841] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 343.236680] CPU: 3 PID: 4288 Comm: reproducer Not tainted 5.16.0-rc1+
[ 343.237569] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-2.el7 04/01/2014
[ 343.238707] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[ 343.239499] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[ 343.241883] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[ 343.242589] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[ 343.243542] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[ 343.244474] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[ 343.245403] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[ 343.246355] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[ 343.247291] FS: 00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[ 343.248350] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 343.249120] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[ 343.250076] Call Trace:
[ 343.250423] <TASK>
[ 343.250713] ? memcpy+0x4d/0x60
[ 343.251162] ? netem_init+0xa0/0xa0 [sch_netem]
[ 343.251795] ? __sanitizer_cov_trace_pc+0x21/0x60
[ 343.252443] netem_enqueue+0xe28/0x33c0 [sch_netem]
[ 343.253102] ? stack_trace_save+0x87/0xb0
[ 343.253655] ? filter_irq_stacks+0xb0/0xb0
[ 343.254220] ? netem_init+0xa0/0xa0 [sch_netem]
[ 343.254837] ? __kasan_check_write+0x14/0x20
[ 343.255418] ? _raw_spin_lock+0x88/0xd6
[ 343.255953] dev_qdisc_enqueue+0x50/0x180
[ 343.256508] __dev_queue_xmit+0x1a7e/0x3090
[ 343.257083] ? netdev_core_pick_tx+0x300/0x300
[ 343.257690] ? check_kcov_mode+0x10/0x40
[ 343.258219] ? _raw_spin_unlock_irqrestore+0x29/0x40
[ 343.258899] ? __kasan_init_slab_obj+0x24/0x30
[ 343.259529] ? setup_object.isra.71+0x23/0x90
[ 343.260121] ? new_slab+0x26e/0x4b0
[ 343.260609] ? kasan_poison+0x3a/0x50
[ 343.261118] ? kasan_unpoison+0x28/0x50
[ 343.261637] ? __kasan_slab_alloc+0x71/0x90
[ 343.262214] ? memcpy+0x4d/0x60
[ 343.262674] ? write_comp_data+0x2f/0x90
[ 343.263209] ? __kasan_check_write+0x14/0x20
[ 343.263802] ? __skb_clone+0x5d6/0x840
[ 343.264329] ? __sanitizer_cov_trace_pc+0x21/0x60
[ 343.264958] dev_queue_xmit+0x1c/0x20
[ 343.265470] netlink_deliver_tap+0x652/0x9c0
[ 343.266067] netlink_unicast+0x5a0/0x7f0
[ 343.266608] ? netlink_attachskb+0x860/0x860
[ 343.267183] ? __sanitizer_cov_trace_pc+0x21/0x60
[ 343.267820] ? write_comp_data+0x2f/0x90
[ 343.268367] netlink_sendmsg+0x922/0xe80
[ 343.268899] ? netlink_unicast+0x7f0/0x7f0
[ 343.269472] ? __sanitizer_cov_trace_pc+0x21/0x60
[ 343.270099] ? write_comp_data+0x2f/0x90
[ 343.270644] ? netlink_unicast+0x7f0/0x7f0
[ 343.271210] sock_sendmsg+0x155/0x190
[ 343.271721] ____sys_sendmsg+0x75f/0x8f0
[ 343.272262] ? kernel_sendmsg+0x60/0x60
[ 343.272788] ? write_comp_data+0x2f/0x90
[ 343.273332] ? write_comp_data+0x2f/0x90
[ 343.273869] ___sys_sendmsg+0x10f/0x190
[ 343.274405] ? sendmsg_copy_msghdr+0x80/0x80
[ 343.274984] ? slab_post_alloc_hook+0x70/0x230
[ 343.275597] ? futex_wait_setup+0x240/0x240
[ 343.276175] ? security_file_alloc+0x3e/0x170
[ 343.276779] ? write_comp_d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix use-after-free bug in hclgevf_send_mbx_msg
Currently, the hns3_remove function firstly uninstall client instance,
and then uninstall acceletion engine device. The netdevice is freed in
client instance uninstall process, but acceletion engine device uninstall
process still use it to trace runtime information. This causes a use after
free problem.
So fixes it by check the instance register state to avoid use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix tc flower deletion for VLAN priority Rx steering
To replicate the issue:-
1) Add 1 flower filter for VLAN Priority based frame steering:-
$ IFDEVNAME=eth0
$ tc qdisc add dev $IFDEVNAME ingress
$ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \
flower vlan_prio 0 hw_tc 0
2) Get the 'pref' id
$ tc filter show dev $IFDEVNAME ingress
3) Delete a specific tc flower record (say pref 49151)
$ tc filter del dev $IFDEVNAME parent ffff: pref 49151
From dmesg, we will observe kernel NULL pointer ooops
[ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 197.171367] #PF: supervisor read access in kernel mode
[ 197.171367] #PF: error_code(0x0000) - not-present page
[ 197.171367] PGD 0 P4D 0
[ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip>
[ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac]
<snip>
[ 197.171367] Call Trace:
[ 197.171367] <TASK>
[ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac]
[ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac]
[ 197.171367] tc_setup_cb_destroy+0xb3/0x180
[ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
The above issue is due to previous incorrect implementation of
tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule()
to get struct flow_rule *rule which is no longer valid for tc filter
delete operation.
struct flow_rule *rule = flow_cls_offload_flow_rule(cls);
struct flow_dissector *dissector = rule->match.dissector;
So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for
earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(),
this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload
record for 'RX frame steering' tc flower, currently used for VLAN
priority. The implementation has taken consideration for future extension
to include other type RX frame steering such as EtherType based.
v2:
- Clean up overly extensive backtrace and rewrite git message to better
explain the kernel NULL pointer issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix deadlock in __mptcp_push_pending()
__mptcp_push_pending() may call mptcp_flush_join_list() with subflow
socket lock held. If such call hits mptcp_sockopt_sync_all() then
subsequently __mptcp_sockopt_sync() could try to lock the subflow
socket for itself, causing a deadlock.
sysrq: Show Blocked State
task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x2d6/0x10c0
? __mod_memcg_state+0x4d/0x70
? csum_partial+0xd/0x20
? _raw_spin_lock_irqsave+0x26/0x50
schedule+0x4e/0xc0
__lock_sock+0x69/0x90
? do_wait_intr_irq+0xa0/0xa0
__lock_sock_fast+0x35/0x50
mptcp_sockopt_sync_all+0x38/0xc0
__mptcp_push_pending+0x105/0x200
mptcp_sendmsg+0x466/0x490
sock_sendmsg+0x57/0x60
__sys_sendto+0xf0/0x160
? do_wait_intr_irq+0xa0/0xa0
? fpregs_restore_userregs+0x12/0xd0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9ba546c2d0
RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0
RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234
RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060
R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8
</TASK>
Fix the issue by using __mptcp_flush_join_list() instead of plain
mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by
Florian. The sockopt sync will be deferred to the workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix type in min_t to avoid stack OOB
Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707
CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x23/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: fix null pointer dereference when IPv6 is not enabled
When we try to add an IPv6 nexthop and IPv6 is not enabled
(!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path
of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug
has been present since the beginning of IPv6 nexthop gateway support.
Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells
us that only fib6_nh_init has a dummy stub because fib6_nh_release should
not be called if fib6_nh_init returns an error, but the commit below added
a call to ipv6_stub->fib6_nh_release in its error path. To fix it return
the dummy stub's -EAFNOSUPPORT error directly without calling
ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path.
[1]
Output is a bit truncated, but it clearly shows the error.
BUG: kernel NULL pointer dereference, address: 000000000000000000
#PF: supervisor instruction fetch in kernel modede
#PF: error_code(0x0010) - not-present pagege
PGD 0 P4D 0
Oops: 0010 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac
RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860
RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000
R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f
R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840
FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0
Call Trace:
<TASK>
nh_create_ipv6+0xed/0x10c
rtm_new_nexthop+0x6d7/0x13f3
? check_preemption_disabled+0x3d/0xf2
? lock_is_held_type+0xbe/0xfd
rtnetlink_rcv_msg+0x23f/0x26a
? check_preemption_disabled+0x3d/0xf2
? rtnl_calcit.isra.0+0x147/0x147
netlink_rcv_skb+0x61/0xb2
netlink_unicast+0x100/0x187
netlink_sendmsg+0x37f/0x3a0
? netlink_unicast+0x187/0x187
sock_sendmsg_nosec+0x67/0x9b
____sys_sendmsg+0x19d/0x1f9
? copy_msghdr_from_user+0x4c/0x5e
? rcu_read_lock_any_held+0x2a/0x78
___sys_sendmsg+0x6c/0x8c
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? lockdep_hardirqs_on+0xd9/0x102
? sockfd_lookup_light+0x69/0x99
__sys_sendmsg+0x50/0x6e
do_syscall_64+0xcb/0xf2
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f98dea28914
Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53
RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e
RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914
RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008
R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001
R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0
</TASK>
Modules linked in: bridge stp llc bonding virtio_net |
