| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, in the RLE planar decode path, `planar_decompress_plane_rle()` writes into `pDstData` at `((nYDst+y) * nDstStep) + (4*nXDst) + nChannel` without verifying that `(nYDst+nSrcHeight)` fits in the destination height or that `(nXDst+nSrcWidth)` fits in the destination stride. When `TempFormat != DstFormat`, `pDstData` becomes `planar->pTempData` (sized for the desktop), while `nYDst` is only validated against the **surface** by `is_within_surface()`. A malicious RDP server can exploit this to perform a heap out-of-bounds write with attacker-controlled offset and pixel data on any connecting FreeRDP client. The OOB write reaches up to 132,096 bytes past the temp buffer end, and on the brk heap (desktop ≤ 128×128), an adjacent `NSC_CONTEXT` struct's `decode` function pointer is overwritten with attacker-controlled pixel data — control-flow–relevant corruption (function pointer overwritten) demonstrated under deterministic heap layout (`nsc->decode = 0xFF414141FF414141`). Version 3.23.0 fixes the vulnerability. |
| seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 1.4.0
and below, overriding encoded array lengths by replacing them with an excessively large value causes the deserialization process to significantly increase processing time. This issue has been fixed in version 1.4.1. |
| Seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 1.4.0
and below, serialization of objects with extreme depth can exceed the maximum call stack limit. In version 1.4.1, Seroval introduces a `depthLimit` parameter in serialization/deserialization methods. An error will be thrown if the depth limit is reached. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0, an authorization bypass vulnerability in the patient portal signature endpoint allows authenticated portal users to upload and overwrite provider signatures by setting `type=admin-signature` and specifying any provider user ID. This could potentially lead to signature forgery on medical documents, legal compliance violations, and fraud. The issue occurs when portal users are allowed to modify provider signatures without proper authorization checks. Version 8.0.0 fixes the issue. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0, the REST API route table in `apis/routes/_rest_routes_standard.inc.php` does not call `RestConfig::request_authorization_check()` for the document and insurance routes. Other patient routes in the same file (e.g. encounters, patients/med) call it with the appropriate ACL. As a result, any valid API bearer token can access or modify every patient's documents and insurance data, regardless of the token’s OpenEMR ACLs—effectively exposing all document and insurance PHI to any authenticated API client. Version 8.0.0 patches the issue. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0, the DICOM viewer state API (e.g. upload or state save/load) accepts a document ID (`doc_id`) without verifying that the document belongs to the current user’s authorized patient or encounter. An authenticated user can read or modify DICOM viewer state (e.g. annotations, view settings) for any document by enumerating document IDs. Version 8.0.0 fixes the issue. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Versions prior to 8.0.0 contain a SQL injection vulnerability in prescription that can be exploited by authenticated attackers. The vulnerability exists due to insufficient input validation in the prescription listing functionality. Version 8.0.0 fixes the vulnerability. |
| Rufus is a utility that helps format and create bootable USB flash drives. Versions 4.11 and below contain a race condition (TOCTOU) in src/net.c during the creation, validation, and execution of the Fido PowerShell script. Since Rufus runs with elevated privileges (Administrator) but writes the script to the %TEMP% directory (writeable by standard users) without locking the file, a local attacker can replace the legitimate script with a malicious one between the file write operation and the execution step. This allows arbitrary code execution with Administrator privileges. This issue has been fixed in version 4.12_BETA. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, when a PCD file does not contain a valid Sync marker, the DecodeImage() function becomes trapped in an infinite loop while searching for the Sync marker, causing the program to become unresponsive and continuously consume CPU resources, ultimately leading to system resource exhaustion and denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| Due to an uncontrolled resource consumption (Denial of Service) vulnerability, an authenticated attacker with regular user privileges and network access can repeatedly invoke a remote-enabled function module with an excessively large loop-control parameter. This triggers prolonged loop execution that consumes excessive system resources, potentially rendering the system unavailable. Successful exploitation results in a denial-of-service condition that impacts availability, while confidentiality and integrity remain unaffected. |
| The User Registration & Membership plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.2. This is due to incorrect authentication in the 'register_member' function. This makes it possible for unauthenticated attackers to log in a newly registered user on the site who has the 'urm_user_just_created' user meta set. |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the LLDP process to restart, which could cause an affected device to reload unexpectedly.
This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). |
| The WP Responsive Images plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.0 via the 'src' parameter. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| Due to an improperly configured firewall rule, the router will accept any connection on the WAN port with the source port 5222, exposing all services which are normally only accessible through the local network.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| A vulnerability in Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient validation when processing specific Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to the management interface of an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
Note: Only the out-of-band (OOB) management interface is affected. |
| Buffer overflow in parallel HNSW index build in pgvector 0.6.0 through 0.8.1 allows a database user to leak sensitive data from other relations or crash the database server. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper processing when parsing SNMP requests. An attacker could exploit this vulnerability by continuously sending SNMP queries to a specific MIB of an affected device. A successful exploit could allow the attacker to cause a kernel panic on the device, resulting in a reload and a DoS condition.
Note: This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv1 or SNMPv2c, the attacker must have a valid read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| The Go MCP SDK used Go's standard encoding/json.Unmarshal for JSON-RPC and MCP protocol message parsing in versions prior to 1.3.1. Go's standard library performs case-insensitive matching of JSON keys to struct field tags — a field tagged json:"method" would also match "Method", "METHOD", etc. This violated the JSON-RPC 2.0 specification, which defines exact field names. A malicious MCP peer may have been able to send protocol messages with non-standard field casing that the SDK would silently accept. This had the potential for bypassing intermediary inspection and coss-implementation inconsistency. Go's standard JSON unmarshaling was replaced with a case-sensitive decoder in commit 7b8d81c. Users are advised to update to v1.3.1 to resolve this issue. |
| mchange-commons-java, a library that provides Java utilities, includes code that mirrors early implementations of JNDI functionality, including support for remote `factoryClassLocation` values, by which code can be downloaded and invoked within a running application. If an attacker can provoke an application to read a maliciously crafted `jaxax.naming.Reference` or serialized object, they can provoke the download and execution of malicious code. Implementations of this functionality within the JDK were disabled by default behind a System property that defaults to `false`, `com.sun.jndi.ldap.object.trustURLCodebase`. However, since mchange-commons-java includes an independent implementation of JNDI derefencing, libraries (such as c3p0) that resolve references via that implementation could be provoked to download and execute malicious code even after the JDK was hardened. Mirroring the JDK patch, mchange-commons-java's JNDI functionality is gated by configuration parameters that default to restrictive values starting in version 0.4.0. No known workarounds are available. Versions prior to 0.4.0 should be avoided on application CLASSPATHs. |
