| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Apache Solr, the DataImportHandler, an optional but popular module to pull in data from databases and other sources, has a feature in which the whole DIH configuration can come from a request's "dataConfig" parameter. The debug mode of the DIH admin screen uses this to allow convenient debugging / development of a DIH config. Since a DIH config can contain scripts, this parameter is a security risk. Starting with version 8.2.0 of Solr, use of this parameter requires setting the Java System property "enable.dih.dataConfigParam" to true. |
| Apache Solr 5.0.0 to Apache Solr 8.3.1 are vulnerable to a Remote Code Execution through the VelocityResponseWriter. A Velocity template can be provided through Velocity templates in a configset `velocity/` directory or as a parameter. A user defined configset could contain renderable, potentially malicious, templates. Parameter provided templates are disabled by default, but can be enabled by setting `params.resource.loader.enabled` by defining a response writer with that setting set to `true`. Defining a response writer requires configuration API access. Solr 8.4 removed the params resource loader entirely, and only enables the configset-provided template rendering when the configset is `trusted` (has been uploaded by an authenticated user). |
| When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations. |
| An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable. |
| A change introduced in Apache Flink 1.11.0 (and released in 1.11.1 and 1.11.2 as well) allows attackers to read any file on the local filesystem of the JobManager through the REST interface of the JobManager process. Access is restricted to files accessible by the JobManager process. All users should upgrade to Flink 1.11.3 or 1.12.0 if their Flink instance(s) are exposed. The issue was fixed in commit b561010b0ee741543c3953306037f00d7a9f0801 from apache/flink:master. |
| It was found that the fix for CVE-2021-41773 in Apache HTTP Server 2.4.50 was insufficient. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue only affects Apache 2.4.49 and Apache 2.4.50 and not earlier versions. |
| It was found that the fix to address CVE-2021-44228 in Apache Log4j 2.15.0 was incomplete in certain non-default configurations. This could allows attackers with control over Thread Context Map (MDC) input data when the logging configuration uses a non-default Pattern Layout with either a Context Lookup (for example, $${ctx:loginId}) or a Thread Context Map pattern (%X, %mdc, or %MDC) to craft malicious input data using a JNDI Lookup pattern resulting in an information leak and remote code execution in some environments and local code execution in all environments. Log4j 2.16.0 (Java 8) and 2.12.2 (Java 7) fix this issue by removing support for message lookup patterns and disabling JNDI functionality by default. |
| An attacker can abuse the batch-requests plugin to send requests to bypass the IP restriction of Admin API. A default configuration of Apache APISIX (with default API key) is vulnerable to remote code execution. When the admin key was changed or the port of Admin API was changed to a port different from the data panel, the impact is lower. But there is still a risk to bypass the IP restriction of Apache APISIX's data panel. There is a check in the batch-requests plugin which overrides the client IP with its real remote IP. But due to a bug in the code, this check can be bypassed. |
| In Apache CouchDB prior to 3.2.2, an attacker can access an improperly secured default installation without authenticating and gain admin privileges. The CouchDB documentation has always made recommendations for properly securing an installation, including recommending using a firewall in front of all CouchDB installations. |
| For RocketMQ versions 5.1.0 and below, under certain conditions, there is a risk of remote command execution.
Several components of RocketMQ, including NameServer, Broker, and Controller, are leaked on the extranet and lack permission verification, an attacker can exploit this vulnerability by using the update configuration function to execute commands as the system users that RocketMQ is running as. Additionally, an attacker can achieve the same effect by forging the RocketMQ protocol content.
To prevent these attacks, users are recommended to upgrade to version 5.1.1 or above for using RocketMQ 5.x or 4.9.6 or above for using RocketMQ 4.x . |
| The Java OpenWire protocol marshaller is vulnerable to Remote Code
Execution. This vulnerability may allow a remote attacker with network
access to either a Java-based OpenWire broker or client to run arbitrary
shell commands by manipulating serialized class types in the OpenWire
protocol to cause either the client or the broker (respectively) to
instantiate any class on the classpath.
Users are recommended to upgrade
both brokers and clients to version 5.15.16, 5.16.7, 5.17.6, or 5.18.3
which fixes this issue. |
| Incorrect Authorization vulnerability in Apache OFBiz.
This issue affects Apache OFBiz: through 18.12.14.
Users are recommended to upgrade to version 18.12.15, which fixes the issue.
Unauthenticated endpoints could allow execution of screen rendering code of screens if some preconditions are met (such as when the screen definitions don't explicitly check user's permissions because they rely on the configuration of their endpoints). |
| Direct Request ('Forced Browsing') vulnerability in Apache OFBiz.
This issue affects Apache OFBiz: before 18.12.16.
Users are recommended to upgrade to version 18.12.16, which fixes the issue. |
| Server-Side Request Forgery (SSRF) in Apache HTTP Server on Windows allows to potentially leak NTLM hashes to a malicious server via
mod_rewrite or apache expressions that pass unvalidated request input.
This issue affects Apache HTTP Server: from 2.4.0 through 2.4.63.
Note: The Apache HTTP Server Project will be setting a higher bar for accepting vulnerability reports regarding SSRF via UNC paths.
The server offers limited protection against administrators directing the server to open UNC paths.
Windows servers should limit the hosts they will connect over via SMB based on the nature of NTLM authentication. |
| In some mod_ssl configurations on Apache HTTP Server versions through to 2.4.63, an HTTP desynchronisation attack allows a man-in-the-middle attacker to hijack an HTTP session via a TLS upgrade.
Only configurations using "SSLEngine optional" to enable TLS upgrades are affected. Users are recommended to upgrade to version 2.4.64, which removes support for TLS upgrade. |
| The attacker can use the raft server protocol in an unauthenticated way. The attacker can see the server's resources, including directories and files.
This issue affects Apache Zeppelin: from 0.10.1 up to 0.12.0.
Users are recommended to upgrade to version 0.12.0, which fixes the issue by removing the Cluster Interpreter. |
| Users with administrator access can create databases files outside the files area of the Fuseki server.
This issue affects Apache Jena version up to 5.4.0.
Users are recommended to upgrade to version 5.5.0, which fixes the issue. |
| Blind XXE Vulnerabilities in jackrabbit-spi-commons and jackrabbit-core in Apache Jackrabbit < 2.23.2 due to usage of an unsecured document build to load privileges.
Users are recommended to upgrade to versions 2.20.17 (Java 8), 2.22.1 (Java 11) or 2.23.2 (Java 11, beta versions), which fix this issue. Earlier versions (up to 2.20.16) are not supported anymore, thus users should update to the respective supported version. |
| File access paths in configuration files uploaded by users with administrator access are not validated.
This issue affects Apache Jena version up to 5.4.0.
Users are recommended to upgrade to version 5.5.0, which does not allow arbitrary configuration upload. |
| Improper Input Validation vulnerability in Parquet-MR of Apache Parquet allows an attacker to DoS by malicious Parquet files. This issue affects Apache Parquet-MR version 1.9.0 and later versions. |
