| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/debugfs - Fix debugfs uninit process issue
During the zip probe process, the debugfs failure does not stop
the probe. When debugfs initialization fails, jumping to the
error branch will also release regs, in addition to its own
rollback operation.
As a result, it may be released repeatedly during the regs
uninit process. Therefore, the null check needs to be added to
the regs uninit process. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: sar: drop lockdep assertion in rtw89_set_sar_from_acpi
The following assertion is triggered on the rtw89 driver startup. It
looks meaningless to hold wiphy lock on the early init stage so drop the
assertion.
WARNING: CPU: 7 PID: 629 at drivers/net/wireless/realtek/rtw89/sar.c:502 rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core]
CPU: 7 UID: 0 PID: 629 Comm: (udev-worker) Not tainted 6.15.0+ #29 PREEMPT(lazy)
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024
RIP: 0010:rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core]
Call Trace:
<TASK>
rtw89_sar_init+0x68/0x2c0 [rtw89_core]
rtw89_core_init+0x188e/0x1e50 [rtw89_core]
rtw89_pci_probe+0x530/0xb50 [rtw89_pci]
local_pci_probe+0xd9/0x190
pci_call_probe+0x183/0x540
pci_device_probe+0x171/0x2c0
really_probe+0x1e1/0x890
__driver_probe_device+0x18c/0x390
driver_probe_device+0x4a/0x120
__driver_attach+0x1a0/0x530
bus_for_each_dev+0x10b/0x190
bus_add_driver+0x2eb/0x540
driver_register+0x1a3/0x3a0
do_one_initcall+0xd5/0x450
do_init_module+0x2cc/0x8f0
init_module_from_file+0xe1/0x150
idempotent_init_module+0x226/0x760
__x64_sys_finit_module+0xcd/0x150
do_syscall_64+0x94/0x380
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
zloop: fix KASAN use-after-free of tag set
When a zoned loop device, or zloop device, is removed, KASAN enabled
kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The
BUG happens because zloop_ctl_remove() calls put_disk(), which invokes
zloop_free_disk(). The zloop_free_disk() frees the memory allocated for
the zlo pointer. However, after the memory is freed, zloop_ctl_remove()
calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo.
Hence the KASAN use-after-free.
zloop_ctl_remove()
put_disk(zlo->disk)
put_device()
kobject_put()
...
zloop_free_disk()
kvfree(zlo)
blk_mq_free_tag_set(&zlo->tag_set)
To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set)
from zloop_ctl_remove() into zloop_free_disk(). This ensures that
the tag_set is freed before the call to kvfree(zlo). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix potential double remove of hotplug slot
In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the
device") the zpci_exit_slot() was moved from zpci_device_reserved() to
zpci_release_device() with the intention of keeping the hotplug slot
around until the device is actually removed.
Now zpci_release_device() is only called once all references are
dropped. Since the zPCI subsystem only drops its reference once the
device is in the reserved state it follows that zpci_release_device()
must only deal with devices in the reserved state. Despite that it
contains code to tear down from both configured and standby state. For
the standby case this already includes the removal of the hotplug slot
so would cause a double removal if a device was ever removed in
either configured or standby state.
Instead of causing a potential double removal in a case that should
never happen explicitly WARN_ON() if a device in non-reserved state is
released and get rid of the dead code cases. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double put of @cfile in smb2_rename_path()
If smb2_set_path_attr() is called with a valid @cfile and returned
-EINVAL, we need to call cifs_get_writable_path() again as the
reference of @cfile was already dropped by previous smb2_compound_op()
call. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix inode number range checks
Patch series "nilfs2: fix potential issues related to reserved inodes".
This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.
This patch (of 3):
In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.
As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.
In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.
Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.
Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Set object to close if ondemand_id < 0 in copen
If copen is maliciously called in the user mode, it may delete the request
corresponding to the random id. And the request may have not been read yet.
Note that when the object is set to reopen, the open request will be done
with the still reopen state in above case. As a result, the request
corresponding to this object is always skipped in select_req function, so
the read request is never completed and blocks other process.
Fix this issue by simply set object to close if its id < 0 in copen. |
| A DMA reentrancy issue leading to a use-after-free error was found in the e1000e NIC emulation code in QEMU. This issue could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. |
| Use After Free vulnerability in Silicon Labs Bluetooth SDK on 32 bit, ARM may allow an attacker with precise timing capabilities to intercept a small number of packets intended for a recipient that has left the network.This issue affects Silabs Bluetooth SDK: through 8.0.0. |
| Insufficient clearing of GPU global memory could allow a malicious process running on the same GPU to read left over memory values potentially leading to loss of confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Defer work in bpf_timer_cancel_and_free
Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.
It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.
However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.
Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).
Update existing code comments to reflect the new state of affairs. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: cyclic allocation of msg_id to avoid reuse
Reusing the msg_id after a maliciously completed reopen request may cause
a read request to remain unprocessed and result in a hung, as shown below:
t1 | t2 | t3
-------------------------------------------------
cachefiles_ondemand_select_req
cachefiles_ondemand_object_is_close(A)
cachefiles_ondemand_set_object_reopening(A)
queue_work(fscache_object_wq, &info->work)
ondemand_object_worker
cachefiles_ondemand_init_object(A)
cachefiles_ondemand_send_req(OPEN)
// get msg_id 6
wait_for_completion(&req_A->done)
cachefiles_ondemand_daemon_read
// read msg_id 6 req_A
cachefiles_ondemand_get_fd
copy_to_user
// Malicious completion msg_id 6
copen 6,-1
cachefiles_ondemand_copen
complete(&req_A->done)
// will not set the object to close
// because ondemand_id && fd is valid.
// ondemand_object_worker() is done
// but the object is still reopening.
// new open req_B
cachefiles_ondemand_init_object(B)
cachefiles_ondemand_send_req(OPEN)
// reuse msg_id 6
process_open_req
copen 6,A.size
// The expected failed copen was executed successfully
Expect copen to fail, and when it does, it closes fd, which sets the
object to close, and then close triggers reopen again. However, due to
msg_id reuse resulting in a successful copen, the anonymous fd is not
closed until the daemon exits. Therefore read requests waiting for reopen
to complete may trigger hung task.
To avoid this issue, allocate the msg_id cyclically to avoid reusing the
msg_id for a very short duration of time. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: wait for ondemand_object_worker to finish when dropping object
When queuing ondemand_object_worker() to re-open the object,
cachefiles_object is not pinned. The cachefiles_object may be freed when
the pending read request is completed intentionally and the related
erofs is umounted. If ondemand_object_worker() runs after the object is
freed, it will incur use-after-free problem as shown below.
process A processs B process C process D
cachefiles_ondemand_send_req()
// send a read req X
// wait for its completion
// close ondemand fd
cachefiles_ondemand_fd_release()
// set object as CLOSE
cachefiles_ondemand_daemon_read()
// set object as REOPENING
queue_work(fscache_wq, &info->ondemand_work)
// close /dev/cachefiles
cachefiles_daemon_release
cachefiles_flush_reqs
complete(&req->done)
// read req X is completed
// umount the erofs fs
cachefiles_put_object()
// object will be freed
cachefiles_ondemand_deinit_obj_info()
kmem_cache_free(object)
// both info and object are freed
ondemand_object_worker()
When dropping an object, it is no longer necessary to reopen the object,
so use cancel_work_sync() to cancel or wait for ondemand_object_worker()
to finish. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: avoid double fput() on failed usercopy
If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.
Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.
Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid. |
| A use-after-free vulnerability was found in the siano smsusb module in the Linux kernel. The bug occurs during device initialization when the siano device is plugged in. This flaw allows a local user to crash the system, causing a denial of service condition. |
| A use-after-free vulnerability was found in the cxgb4 driver in the Linux kernel. The bug occurs when the cxgb4 device is detaching due to a possible rearming of the flower_stats_timer from the work queue. This flaw allows a local user to crash the system, causing a denial of service condition. |
| A use-after-free flaw was found in vcs_read in drivers/tty/vt/vc_screen.c in vc_screen in the Linux Kernel. This issue may allow an attacker with local user access to cause a system crash or leak internal kernel information. |
| A vulnerability was found in libssh, where an uninitialized variable exists under certain conditions in the privatekey_from_file() function. This flaw can be triggered if the file specified by the filename doesn't exist and may lead to possible signing failures or heap corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix use-after-free in rtl8712_dl_fw
Syzbot reported use-after-free in rtl8712_dl_fw(). The problem was in
race condition between r871xu_dev_remove() ->ndo_open() callback.
It's easy to see from crash log, that driver accesses released firmware
in ->ndo_open() callback. It may happen, since driver was releasing
firmware _before_ unregistering netdev. Fix it by moving
unregister_netdev() before cleaning up resources.
Call Trace:
...
rtl871x_open_fw drivers/staging/rtl8712/hal_init.c:83 [inline]
rtl8712_dl_fw+0xd95/0xe10 drivers/staging/rtl8712/hal_init.c:170
rtl8712_hal_init drivers/staging/rtl8712/hal_init.c:330 [inline]
rtl871x_hal_init+0xae/0x180 drivers/staging/rtl8712/hal_init.c:394
netdev_open+0xe6/0x6c0 drivers/staging/rtl8712/os_intfs.c:380
__dev_open+0x2bc/0x4d0 net/core/dev.c:1484
Freed by task 1306:
...
release_firmware+0x1b/0x30 drivers/base/firmware_loader/main.c:1053
r871xu_dev_remove+0xcc/0x2c0 drivers/staging/rtl8712/usb_intf.c:599
usb_unbind_interface+0x1d8/0x8d0 drivers/usb/core/driver.c:458 |
| A vulnerability was determined in axboe fio up to 3.41. This impacts the function __parse_jobs_ini of the file init.c. Executing manipulation can lead to use after free. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. |
