| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix netif state handling
mlx5e_suspend cleans resources only if netif_device_present() returns
true. However, mlx5e_resume changes the state of netif, via
mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED.
In the below case, the above leads to NULL-ptr Oops[1] and memory
leaks:
mlx5e_probe
_mlx5e_resume
mlx5e_attach_netdev
mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach()
register_netdev <-- failed for some reason.
ERROR_FLOW:
_mlx5e_suspend <-- netif_device_present return false, resources aren't freed :(
Hence, clean resources in this case as well.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP
CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at0xffffffffffffffd6.
RSP: 0018:ffff888178aaf758 EFLAGS: 00010246
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x14c/0x3c0
? exc_page_fault+0x75/0x140
? asm_exc_page_fault+0x22/0x30
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core]
mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib]
mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib]
__mlx5_ib_add+0x34/0xd0 [mlx5_ib]
mlx5r_probe+0xe1/0x210 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x38/0x80
? driver_sysfs_add+0x51/0x80
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x637/0x840
__auxiliary_device_add+0x3b/0xa0
add_adev+0xc9/0x140 [mlx5_core]
mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core]
mlx5_register_device+0x53/0xa0 [mlx5_core]
mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core]
mlx5_init_one+0x3b/0x60 [mlx5_core]
probe_one+0x44c/0x730 [mlx5_core]
local_pci_probe+0x3e/0x90
pci_device_probe+0xbf/0x210
? kernfs_create_link+0x5d/0xa0
? sysfs_do_create_link_sd+0x60/0xc0
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
pci_bus_add_device+0x54/0x80
pci_iov_add_virtfn+0x2e6/0x320
sriov_enable+0x208/0x420
mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core]
sriov_numvfs_store+0xae/0x1a0
kernfs_fop_write_iter+0x10c/0x1a0
vfs_write+0x291/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
CR2: 0000000000000000
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate slices count returned by FW
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix NULL module pointer assignment at card init
The commit 81033c6b584b ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action()
fails, the irq vector is not freed, which leads to a memory leak.
Replace the devm_add_action with devm_add_action_or_reset to ensure
the irq vector can be destroyed when it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: sungem: remove .ndo_poll_controller to avoid deadlocks
Erhard reports netpoll warnings from sungem:
netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398)
WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c
gem_poll_controller() disables interrupts, which may sleep.
We can't sleep in netpoll, it has interrupts disabled completely.
Strangely, gem_poll_controller() doesn't even poll the completions,
and instead acts as if an interrupt has fired so it just schedules
NAPI and exits. None of this has been necessary for years, since
netpoll invokes NAPI directly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix deadlock on SRQ async events.
xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/
xa_erase_irq() to avoid deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Modify the print level of CQE error
Too much print may lead to a panic in kernel. Change ibdev_err() to
ibdev_err_ratelimited(), and change the printing level of cqe dump
to debug level. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: fix possible dead-lock in nr_rt_ioctl()
syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1]
Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node)
[1]
WARNING: possible circular locking dependency detected
6.9.0-rc7-syzkaller-02147-g654de42f3fc6 #0 Not tainted
------------------------------------------------------
syz-executor350/5129 is trying to acquire lock:
ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_node_lock include/net/netrom.h:152 [inline]
ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:464 [inline]
ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697
but task is already holding lock:
ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline]
ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (nr_node_list_lock){+...}-{2:2}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
nr_remove_node net/netrom/nr_route.c:299 [inline]
nr_del_node+0x4b4/0x820 net/netrom/nr_route.c:355
nr_rt_ioctl+0xa95/0x1090 net/netrom/nr_route.c:683
sock_do_ioctl+0x158/0x460 net/socket.c:1222
sock_ioctl+0x629/0x8e0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&nr_node->node_lock){+...}-{2:2}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline]
_raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:356 [inline]
nr_node_lock include/net/netrom.h:152 [inline]
nr_dec_obs net/netrom/nr_route.c:464 [inline]
nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697
sock_do_ioctl+0x158/0x460 net/socket.c:1222
sock_ioctl+0x629/0x8e0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(nr_node_list_lock);
lock(&nr_node->node_lock);
lock(nr_node_list_lock);
lock(&nr_node->node_lock);
*** DEADLOCK ***
1 lock held by syz-executor350/5129:
#0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline]
#0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline]
#0: ffffffff8f70
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix possible use-after-free issue in ftrace_location()
KASAN reports a bug:
BUG: KASAN: use-after-free in ftrace_location+0x90/0x120
Read of size 8 at addr ffff888141d40010 by task insmod/424
CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcf/0x610
kasan_report+0xb5/0xe0
ftrace_location+0x90/0x120
register_kprobe+0x14b/0xa40
kprobe_init+0x2d/0xff0 [kprobe_example]
do_one_initcall+0x8f/0x2d0
do_init_module+0x13a/0x3c0
load_module+0x3082/0x33d0
init_module_from_file+0xd2/0x130
__x64_sys_finit_module+0x306/0x440
do_syscall_64+0x68/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79
The root cause is that, in lookup_rec(), ftrace record of some address
is being searched in ftrace pages of some module, but those ftrace pages
at the same time is being freed in ftrace_release_mod() as the
corresponding module is being deleted:
CPU1 | CPU2
register_kprobes() { | delete_module() {
check_kprobe_address_safe() { |
arch_check_ftrace_location() { |
ftrace_location() { |
lookup_rec() // USE! | ftrace_release_mod() // Free!
To fix this issue:
1. Hold rcu lock as accessing ftrace pages in ftrace_location_range();
2. Use ftrace_location_range() instead of lookup_rec() in
ftrace_location();
3. Call synchronize_rcu() before freeing any ftrace pages both in
ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem(). |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: Fix sizeof() vs ARRAY_SIZE() bug
The "buf" pointer is an array of u16 values. This code should be
using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512),
otherwise it can the still got out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix use-after-free of timer for log writer thread
Patch series "nilfs2: fix log writer related issues".
This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.
This patch (of 3):
A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.
The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.
Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential hang in nilfs_detach_log_writer()
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
nilfs_detach_log_writer
nilfs_segctor_destroy
nilfs_segctor_kill_thread --> Shut down log writer thread
flush_work
nilfs_iput_work_func
nilfs_dispose_list
iput
nilfs_evict_inode
nilfs_transaction_commit
nilfs_construct_segment (if inode needs sync)
nilfs_segctor_sync --> Attempt to synchronize with
log writer thread
*** DEADLOCK ***
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix buffer overflow in print_cpu_stall_info()
The rcuc-starvation output from print_cpu_stall_info() might overflow the
buffer if there is a huge difference in jiffies difference. The situation
might seem improbable, but computers sometimes get very confused about
time, which can result in full-sized integers, and, in this case,
buffer overflow.
Also, the unsigned jiffies difference is printed using %ld, which is
normally for signed integers. This is intentional for debugging purposes,
but it is not obvious from the code.
This commit therefore changes sprintf() to snprintf() and adds a
clarifying comment about intention of %ld format.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Prevent null-pointer dereference when prog to load has no BTF
In bpf_objec_load_prog(), there's no guarantee that obj->btf is non-NULL
when passing it to btf__fd(), and this function does not perform any
check before dereferencing its argument (as bpf_object__btf_fd() used to
do). As a consequence, we get segmentation fault errors in bpftool (for
example) when trying to load programs that come without BTF information.
v2: Keep btf__fd() in the fix instead of reverting to bpf_object__btf_fd(). |
| In the Linux kernel, the following vulnerability has been resolved:
cppc_cpufreq: Fix possible null pointer dereference
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/tsens: Fix null pointer dereference
compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c)
as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null
pointer dereference (if DEBUG or DYNAMIC_DEBUG set).
Fix this bug by adding null pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix potential glock use-after-free on unmount
When a DLM lockspace is released and there ares still locks in that
lockspace, DLM will unlock those locks automatically. Commit
fb6791d100d1b started exploiting this behavior to speed up filesystem
unmount: gfs2 would simply free glocks it didn't want to unlock and then
release the lockspace. This didn't take the bast callbacks for
asynchronous lock contention notifications into account, which remain
active until until a lock is unlocked or its lockspace is released.
To prevent those callbacks from accessing deallocated objects, put the
glocks that should not be unlocked on the sd_dead_glocks list, release
the lockspace, and only then free those glocks.
As an additional measure, ignore unexpected ast and bast callbacks if
the receiving glock is dead. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}' |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out
of bounds when writing data to the event_group array. If the number of
events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the
memory write overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/} |
