| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: Do not mark ACPI devices as irq safe
On ACPI machines, the tegra i2c module encounters an issue due to a
mutex being called inside a spinlock. This leads to the following bug:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
...
Call trace:
__might_sleep
__mutex_lock_common
mutex_lock_nested
acpi_subsys_runtime_resume
rpm_resume
tegra_i2c_xfer
The problem arises because during __pm_runtime_resume(), the spinlock
&dev->power.lock is acquired before rpm_resume() is called. Later,
rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on
mutexes, triggering the error.
To address this issue, devices on ACPI are now marked as not IRQ-safe,
considering the dependency of acpi_subsys_runtime_resume() on mutexes. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mmc_test: Fix NULL dereference on allocation failure
If the "test->highmem = alloc_pages()" allocation fails then calling
__free_pages(test->highmem) will result in a NULL dereference. Also
change the error code to -ENOMEM instead of returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: fix error recovery leading to data corruption on ESE devices
Extent Space Efficient (ESE) or thin provisioned volumes need to be
formatted on demand during usual IO processing.
The dasd_ese_needs_format function checks for error codes that signal
the non existence of a proper track format.
The check for incorrect length is to imprecise since other error cases
leading to transport of insufficient data also have this flag set.
This might lead to data corruption in certain error cases for example
during a storage server warmstart.
Fix by removing the check for incorrect length and replacing by
explicitly checking for invalid track format in transport mode.
Also remove the check for file protected since this is not a valid
ESE handling case. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb vs. core-mm PT locking
We recently made GUP's common page table walking code to also walk hugetlb
VMAs without most hugetlb special-casing, preparing for the future of
having less hugetlb-specific page table walking code in the codebase.
Turns out that we missed one page table locking detail: page table locking
for hugetlb folios that are not mapped using a single PMD/PUD.
Assume we have hugetlb folio that spans multiple PTEs (e.g., 64 KiB
hugetlb folios on arm64 with 4 KiB base page size). GUP, as it walks the
page tables, will perform a pte_offset_map_lock() to grab the PTE table
lock.
However, hugetlb that concurrently modifies these page tables would
actually grab the mm->page_table_lock: with USE_SPLIT_PTE_PTLOCKS, the
locks would differ. Something similar can happen right now with hugetlb
folios that span multiple PMDs when USE_SPLIT_PMD_PTLOCKS.
This issue can be reproduced [1], for example triggering:
[ 3105.936100] ------------[ cut here ]------------
[ 3105.939323] WARNING: CPU: 31 PID: 2732 at mm/gup.c:142 try_grab_folio+0x11c/0x188
[ 3105.944634] Modules linked in: [...]
[ 3105.974841] CPU: 31 PID: 2732 Comm: reproducer Not tainted 6.10.0-64.eln141.aarch64 #1
[ 3105.980406] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-4.fc40 05/24/2024
[ 3105.986185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3105.991108] pc : try_grab_folio+0x11c/0x188
[ 3105.994013] lr : follow_page_pte+0xd8/0x430
[ 3105.996986] sp : ffff80008eafb8f0
[ 3105.999346] x29: ffff80008eafb900 x28: ffffffe8d481f380 x27: 00f80001207cff43
[ 3106.004414] x26: 0000000000000001 x25: 0000000000000000 x24: ffff80008eafba48
[ 3106.009520] x23: 0000ffff9372f000 x22: ffff7a54459e2000 x21: ffff7a546c1aa978
[ 3106.014529] x20: ffffffe8d481f3c0 x19: 0000000000610041 x18: 0000000000000001
[ 3106.019506] x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000000
[ 3106.024494] x14: ffffb85477fdfe08 x13: 0000ffff9372ffff x12: 0000000000000000
[ 3106.029469] x11: 1fffef4a88a96be1 x10: ffff7a54454b5f0c x9 : ffffb854771b12f0
[ 3106.034324] x8 : 0008000000000000 x7 : ffff7a546c1aa980 x6 : 0008000000000080
[ 3106.038902] x5 : 00000000001207cf x4 : 0000ffff9372f000 x3 : ffffffe8d481f000
[ 3106.043420] x2 : 0000000000610041 x1 : 0000000000000001 x0 : 0000000000000000
[ 3106.047957] Call trace:
[ 3106.049522] try_grab_folio+0x11c/0x188
[ 3106.051996] follow_pmd_mask.constprop.0.isra.0+0x150/0x2e0
[ 3106.055527] follow_page_mask+0x1a0/0x2b8
[ 3106.058118] __get_user_pages+0xf0/0x348
[ 3106.060647] faultin_page_range+0xb0/0x360
[ 3106.063651] do_madvise+0x340/0x598
Let's make huge_pte_lockptr() effectively use the same PT locks as any
core-mm page table walker would. Add ptep_lockptr() to obtain the PTE
page table lock using a pte pointer -- unfortunately we cannot convert
pte_lockptr() because virt_to_page() doesn't work with kmap'ed page tables
we can have with CONFIG_HIGHPTE.
Handle CONFIG_PGTABLE_LEVELS correctly by checking in reverse order, such
that when e.g., CONFIG_PGTABLE_LEVELS==2 with
PGDIR_SIZE==P4D_SIZE==PUD_SIZE==PMD_SIZE will work as expected. Document
why that works.
There is one ugly case: powerpc 8xx, whereby we have an 8 MiB hugetlb
folio being mapped using two PTE page tables. While hugetlb wants to take
the PMD table lock, core-mm would grab the PTE table lock of one of both
PTE page tables. In such corner cases, we have to make sure that both
locks match, which is (fortunately!) currently guaranteed for 8xx as it
does not support SMP and consequently doesn't use split PT locks.
[1] https://lore.kernel.org/all/1bbfcc7f-f222-45a5-ac44-c5a1381c596d@redhat.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: Fix data corruption for degraded array with slow disk
read_balance() will avoid reading from slow disks as much as possible,
however, if valid data only lands in slow disks, and a new normal disk
is still in recovery, unrecovered data can be read:
raid1_read_request
read_balance
raid1_should_read_first
-> return false
choose_best_rdev
-> normal disk is not recovered, return -1
choose_bb_rdev
-> missing the checking of recovery, return the normal disk
-> read unrecovered data
Root cause is that the checking of recovery is missing in
choose_bb_rdev(). Hence add such checking to fix the problem.
Also fix similar problem in choose_slow_rdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a kernel verifier crash in stacksafe()
Daniel Hodges reported a kernel verifier crash when playing with sched-ext.
Further investigation shows that the crash is due to invalid memory access
in stacksafe(). More specifically, it is the following code:
if (exact != NOT_EXACT &&
old->stack[spi].slot_type[i % BPF_REG_SIZE] !=
cur->stack[spi].slot_type[i % BPF_REG_SIZE])
return false;
The 'i' iterates old->allocated_stack.
If cur->allocated_stack < old->allocated_stack the out-of-bound
access will happen.
To fix the issue add 'i >= cur->allocated_stack' check such that if
the condition is true, stacksafe() should fail. Otherwise,
cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Take state lock during tx timeout reporter
mlx5e_safe_reopen_channels() requires the state lock taken. The
referenced changed in the Fixes tag removed the lock to fix another
issue. This patch adds it back but at a later point (when calling
mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the
Fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: initialise extack before use
Fix missing initialisation of extack in flow offload. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix IPsec RoCE MPV trace call
Prevent the call trace below from happening, by not allowing IPsec
creation over a slave, if master device doesn't support IPsec.
WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94
Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec
ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci]
CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2
Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021
Workqueue: events xfrm_state_gc_task
RIP: 0010:down_read+0x75/0x94
Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0
RSP: 0018:ffffb26387773da8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000
RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540
R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905
FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0
Call Trace:
<TASK>
? show_trace_log_lvl+0x1d6/0x2f9
? show_trace_log_lvl+0x1d6/0x2f9
? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core]
? down_read+0x75/0x94
? __warn+0x80/0x113
? down_read+0x75/0x94
? report_bug+0xa4/0x11d
? handle_bug+0x35/0x8b
? exc_invalid_op+0x14/0x75
? asm_exc_invalid_op+0x16/0x1b
? down_read+0x75/0x94
? down_read+0xe/0x94
mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core]
mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core]
tx_destroy+0x1b/0xc0 [mlx5_core]
tx_ft_put+0x53/0xc0 [mlx5_core]
mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core]
___xfrm_state_destroy+0x10f/0x1a2
xfrm_state_gc_task+0x81/0xa9
process_one_work+0x1f1/0x3c6
worker_thread+0x53/0x3e4
? process_one_work.cold+0x46/0x3c
kthread+0x127/0x144
? set_kthread_struct+0x60/0x52
ret_from_fork+0x22/0x2d
</TASK>
---[ end trace 5ef7896144d398e1 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable()
For cases where the crtc's connectors_changed was set without enable/active
getting toggled , there is an atomic_enable() call followed by an
atomic_disable() but without an atomic_mode_set().
This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in
the atomic_enable() as the dpu_encoder's connector was cleared in the
atomic_disable() but not re-assigned as there was no atomic_mode_set() call.
Fix the NULL ptr access by moving the assignment for atomic_enable() and also
use drm_atomic_get_new_connector_for_encoder() to get the connector from
the atomic_state.
Patchwork: https://patchwork.freedesktop.org/patch/606729/ |
| In the Linux kernel, the following vulnerability has been resolved:
s390/boot: Avoid possible physmem_info segment corruption
When physical memory for the kernel image is allocated it does not
consider extra memory required for offsetting the image start to
match it with the lower 20 bits of KASLR virtual base address. That
might lead to kernel access beyond its memory range. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: move stopping keep-alive into nvme_uninit_ctrl()
Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup")
moves starting keep-alive from nvme_start_ctrl() into
nvme_init_ctrl_finish(), but don't move stopping keep-alive into
nvme_uninit_ctrl(), so keep-alive work can be started and keep pending
after failing to start controller, finally use-after-free is triggered if
nvme host driver is unloaded.
This patch fixes kernel panic when running nvme/004 in case that connection
failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl().
This way is reasonable because keep-alive is now started in
nvme_init_ctrl_finish(). |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/firmware: use dma non-coherent allocator
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a
BUG() on startup, when the iommu is enabled:
kernel BUG at include/linux/scatterlist.h:187!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30
Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019
RIP: 0010:sg_init_one+0x85/0xa0
Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54
24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b
0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00
RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000
RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508
R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018
FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0
Call Trace:
<TASK>
? die+0x36/0x90
? do_trap+0xdd/0x100
? sg_init_one+0x85/0xa0
? do_error_trap+0x65/0x80
? sg_init_one+0x85/0xa0
? exc_invalid_op+0x50/0x70
? sg_init_one+0x85/0xa0
? asm_exc_invalid_op+0x1a/0x20
? sg_init_one+0x85/0xa0
nvkm_firmware_ctor+0x14a/0x250 [nouveau]
nvkm_falcon_fw_ctor+0x42/0x70 [nouveau]
ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau]
r535_gsp_oneinit+0xb3/0x15f0 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? nvkm_udevice_new+0x95/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? ktime_get+0x47/0xb0
Fix this by using the non-coherent allocator instead, I think there
might be a better answer to this, but it involve ripping up some of
APIs using sg lists. |
| In the Linux kernel, the following vulnerability has been resolved:
char: xillybus: Check USB endpoints when probing device
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
re-enumerating full-speed devices after a failed address device command
can trigger a NULL pointer dereference.
Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size
value during enumeration. Usb core calls usb_ep0_reinit() in this case,
which ends up calling xhci_configure_endpoint().
On Panther point xHC the xhci_configure_endpoint() function will
additionally check and reserve bandwidth in software. Other hosts do
this in hardware
If xHC address device command fails then a new xhci_virt_device structure
is allocated as part of re-enabling the slot, but the bandwidth table
pointers are not set up properly here.
This triggers the NULL pointer dereference the next time usb_ep0_reinit()
is called and xhci_configure_endpoint() tries to check and reserve
bandwidth
[46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd
[46710.713699] usb 3-1: Device not responding to setup address.
[46710.917684] usb 3-1: Device not responding to setup address.
[46711.125536] usb 3-1: device not accepting address 5, error -71
[46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008
[46711.125600] #PF: supervisor read access in kernel mode
[46711.125603] #PF: error_code(0x0000) - not-present page
[46711.125606] PGD 0 P4D 0
[46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI
[46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1
[46711.125620] Hardware name: Gigabyte Technology Co., Ltd.
[46711.125623] Workqueue: usb_hub_wq hub_event [usbcore]
[46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c
Fix this by making sure bandwidth table pointers are set up correctly
after a failed address device command, and additionally by avoiding
checking for bandwidth in cases like this where no actual endpoints are
added or removed, i.e. only context for default control endpoint 0 is
evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: fix validity interception issue when gisa is switched off
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: dcp: fix leak of blob encryption key
Trusted keys unseal the key blob on load, but keep the sealed payload in
the blob field so that every subsequent read (export) will simply
convert this field to hex and send it to userspace.
With DCP-based trusted keys, we decrypt the blob encryption key (BEK)
in the Kernel due hardware limitations and then decrypt the blob payload.
BEK decryption is done in-place which means that the trusted key blob
field is modified and it consequently holds the BEK in plain text.
Every subsequent read of that key thus send the plain text BEK instead
of the encrypted BEK to userspace.
This issue only occurs when importing a trusted DCP-based key and
then exporting it again. This should rarely happen as the common use cases
are to either create a new trusted key and export it, or import a key
blob and then just use it without exporting it again.
Fix this by performing BEK decryption and encryption in a dedicated
buffer. Further always wipe the plain text BEK buffer to prevent leaking
the key via uninitialized memory. |
| In the Linux kernel, the following vulnerability has been resolved:
vfs: Don't evict inode under the inode lru traversing context
The inode reclaiming process(See function prune_icache_sb) collects all
reclaimable inodes and mark them with I_FREEING flag at first, at that
time, other processes will be stuck if they try getting these inodes
(See function find_inode_fast), then the reclaiming process destroy the
inodes by function dispose_list(). Some filesystems(eg. ext4 with
ea_inode feature, ubifs with xattr) may do inode lookup in the inode
evicting callback function, if the inode lookup is operated under the
inode lru traversing context, deadlock problems may happen.
Case 1: In function ext4_evict_inode(), the ea inode lookup could happen
if ea_inode feature is enabled, the lookup process will be stuck
under the evicting context like this:
1. File A has inode i_reg and an ea inode i_ea
2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea
3. Then, following three processes running like this:
PA PB
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// i_reg is added into lru, lru->i_ea->i_reg
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
i_ea->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(i_reg)
spin_unlock(&i_reg->i_lock)
spin_unlock(lru_lock)
rm file A
i_reg->nlink = 0
iput(i_reg) // i_reg->nlink is 0, do evict
ext4_evict_inode
ext4_xattr_delete_inode
ext4_xattr_inode_dec_ref_all
ext4_xattr_inode_iget
ext4_iget(i_ea->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(i_ea) ----→ AA deadlock
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&i_ea->i_state)
Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file
deleting process holds BASEHD's wbuf->io_mutex while getting the
xattr inode, which could race with inode reclaiming process(The
reclaiming process could try locking BASEHD's wbuf->io_mutex in
inode evicting function), then an ABBA deadlock problem would
happen as following:
1. File A has inode ia and a xattr(with inode ixa), regular file B has
inode ib and a xattr.
2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa
3. Then, following three processes running like this:
PA PB PC
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// ib and ia are added into lru, lru->ixa->ib->ia
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
ixa->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(ib)
spin_unlock(&ib->i_lock)
spin_unlock(lru_lock)
rm file B
ib->nlink = 0
rm file A
iput(ia)
ubifs_evict_inode(ia)
ubifs_jnl_delete_inode(ia)
ubifs_jnl_write_inode(ia)
make_reservation(BASEHD) // Lock wbuf->io_mutex
ubifs_iget(ixa->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(ixa)
| iput(ib) // ib->nlink is 0, do evict
| ubifs_evict_inode
| ubifs_jnl_delete_inode(ib)
↓ ubifs_jnl_write_inode
ABBA deadlock ←-----make_reservation(BASEHD)
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&ixa->i_state)
Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING
to pin the inode in memory while inode_lru_isolate(
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
rtla/osnoise: Prevent NULL dereference in error handling
If the "tool->data" allocation fails then there is no need to call
osnoise_free_top() and, in fact, doing so will lead to a NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix RX buf alloc_size alignment and atomic op panic
The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to
create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment
is affected by the alloc_size passed into napi_build_skb(). The size needs
to be aligned properly for better performance and atomic operations.
Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic
operations may panic on the skb_shinfo(skb)->dataref due to alignment fault.
To fix this bug, add proper alignment to the alloc_size calculation.
Sample panic info:
[ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce
[ 253.300900] Mem abort info:
[ 253.301760] ESR = 0x0000000096000021
[ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits
[ 253.304268] SET = 0, FnV = 0
[ 253.305172] EA = 0, S1PTW = 0
[ 253.306103] FSC = 0x21: alignment fault
Call trace:
__skb_clone+0xfc/0x198
skb_clone+0x78/0xe0
raw6_local_deliver+0xfc/0x228
ip6_protocol_deliver_rcu+0x80/0x500
ip6_input_finish+0x48/0x80
ip6_input+0x48/0xc0
ip6_sublist_rcv_finish+0x50/0x78
ip6_sublist_rcv+0x1cc/0x2b8
ipv6_list_rcv+0x100/0x150
__netif_receive_skb_list_core+0x180/0x220
netif_receive_skb_list_internal+0x198/0x2a8
__napi_poll+0x138/0x250
net_rx_action+0x148/0x330
handle_softirqs+0x12c/0x3a0 |
