| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/hdcp: Check GSC structure validity
Sometimes xe_gsc is not initialized when checked at HDCP capability
check. Add gsc structure check to avoid null pointer error. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add refcnt to ksmbd_conn struct
When sending an oplock break request, opinfo->conn is used,
But freed ->conn can be used on multichannel.
This patch add a reference count to the ksmbd_conn struct
so that it can be freed when it is no longer used. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Prevent out of bounds access in performance query extensions
Check that the number of perfmons userspace is passing in the copy and
reset extensions is not greater than the internal kernel storage where
the ids will be copied into. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free
When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(),
the 'ppath' is updated but it is the 'path' that is freed, thus potentially
triggering a double-free in the following process:
ext4_ext_replay_update_ex
ppath = path
ext4_force_split_extent_at(&ppath)
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
ext4_find_extent
if (depth > path[0].p_maxdepth)
kfree(path) ---> path First freed
*orig_path = path = NULL ---> null ppath
kfree(path) ---> path double-free !!!
So drop the unnecessary ppath and use path directly to avoid this problem.
And use ext4_find_extent() directly to update path, avoiding unnecessary
memory allocation and freeing. Also, propagate the error returned by
ext4_find_extent() instead of using strange error codes. |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: fix use after free bug in venus_remove due to race condition
in venus_probe, core->work is bound with venus_sys_error_handler, which is
used to handle error. The code use core->sys_err_done to make sync work.
The core->work is started in venus_event_notify.
If we call venus_remove, there might be an unfished work. The possible
sequence is as follows:
CPU0 CPU1
|venus_sys_error_handler
venus_remove |
hfi_destroy |
venus_hfi_destroy |
kfree(hdev); |
|hfi_reinit
|venus_hfi_queues_reinit
|//use hdev
Fix it by canceling the work in venus_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853.
dev_queue_xmit_nit is expected to be called with BH disabled.
__dev_queue_xmit has the following:
/* Disable soft irqs for various locks below. Also
* stops preemption for RCU.
*/
rcu_read_lock_bh();
VRF must follow this invariant. The referenced commit removed this
protection. Which triggered a lockdep warning:
================================
WARNING: inconsistent lock state
6.11.0 #1 Tainted: G W
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x19a/0x4f0
_raw_spin_lock+0x27/0x40
packet_rcv+0xa33/0x1320
__netif_receive_skb_core.constprop.0+0xcb0/0x3a90
__netif_receive_skb_list_core+0x2c9/0x890
netif_receive_skb_list_internal+0x610/0xcc0
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(rlock-AF_PACKET);
<Interrupt>
lock(rlock-AF_PACKET);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x73/0xa0
mark_lock+0x102e/0x16b0
__lock_acquire+0x9ae/0x6170
lock_acquire+0x19a/0x4f0
_raw_spin_lock+0x27/0x40
tpacket_rcv+0x863/0x3b30
dev_queue_xmit_nit+0x709/0xa40
vrf_finish_direct+0x26e/0x340 [vrf]
vrf_l3_out+0x5f4/0xe80 [vrf]
__ip_local_out+0x51e/0x7a0
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
gso: fix udp gso fraglist segmentation after pull from frag_list
Detect gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.
In extreme cases they pull all data into skb linear. For UDP, this
causes a NULL ptr deref in __udpv4_gso_segment_list_csum at
udp_hdr(seg->next)->dest.
Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/timerlat: Drop interface_lock in stop_kthread()
stop_kthread() is the offline callback for "trace/osnoise:online", since
commit 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing
of kthread in stop_kthread()"), the following ABBA deadlock scenario is
introduced:
T1 | T2 [BP] | T3 [AP]
osnoise_hotplug_workfn() | work_for_cpu_fn() | cpuhp_thread_fun()
| _cpu_down() | osnoise_cpu_die()
mutex_lock(&interface_lock) | | stop_kthread()
| cpus_write_lock() | mutex_lock(&interface_lock)
cpus_read_lock() | cpuhp_kick_ap() |
As the interface_lock here in just for protecting the "kthread" field of
the osn_var, use xchg() instead to fix this issue. Also use
for_each_online_cpu() back in stop_per_cpu_kthreads() as it can take
cpu_read_lock() again. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: fix kernel info leak via "[uprobes]" vma
xol_add_vma() maps the uninitialized page allocated by __create_xol_area()
into userspace. On some architectures (x86) this memory is readable even
without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ,
although this doesn't really matter, debugger can read this memory anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
r8169: add tally counter fields added with RTL8125
RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Increase array size of dummy_boolean
[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.
[HOW]
Increase dummy_boolean's array size to 3.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cancel dqi_sync_work before freeing oinfo
ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the
end, if error occurs after successfully reading global quota, it will
trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled:
ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c
This reports that there is an active delayed work when freeing oinfo in
error handling, so cancel dqi_sync_work first. BTW, return status instead
of -1 when .read_file_info fails. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix memfd_pin_folios free_huge_pages leak
memfd_pin_folios followed by unpin_folios fails to restore free_huge_pages
if the pages were not already faulted in, because the folio refcount for
pages created by memfd_alloc_folio never goes to 0. memfd_pin_folios
needs another folio_put to undo the folio_try_get below:
memfd_alloc_folio()
alloc_hugetlb_folio_nodemask()
dequeue_hugetlb_folio_nodemask()
dequeue_hugetlb_folio_node_exact()
folio_ref_unfreeze(folio, 1); ; adds 1 refcount
folio_try_get() ; adds 1 refcount
hugetlb_add_to_page_cache() ; adds 512 refcount (on x86)
With the fix, after memfd_pin_folios + unpin_folios, the refcount for the
(unfaulted) page is 512, which is correct, as the refcount for a faulted
unpinned page is 513. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: bcm2835: Fix timeout during suspend mode
During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].
Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.
[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ar0521: Use cansleep version of gpiod_set_value()
If we use GPIO reset from I2C port expander, we must use *_cansleep()
variant of GPIO functions.
This was not done in ar0521_power_on()/ar0521_power_off() functions.
Let's fix that.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c
Modules linked in:
CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53
Hardware name: Diasom DS-RK3568-SOM-EVB (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : gpiod_set_value+0x74/0x7c
lr : ar0521_power_on+0xcc/0x290
sp : ffffff8001d7ab70
x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000
x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088
x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088
x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80
x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000
x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930
x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0
x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780
x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
gpiod_set_value+0x74/0x7c
ar0521_power_on+0xcc/0x290
... |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix null-ptr-deref when journal load failed.
During the mounting process, if journal_reset() fails because of too short
journal, then lead to jbd2_journal_load() fails with NULL j_sb_buffer.
Subsequently, ocfs2_journal_shutdown() calls
jbd2_journal_flush()->jbd2_cleanup_journal_tail()->
__jbd2_update_log_tail()->jbd2_journal_update_sb_log_tail()
->lock_buffer(journal->j_sb_buffer), resulting in a null-pointer
dereference error.
To resolve this issue, we should check the JBD2_LOADED flag to ensure the
journal was properly loaded. Additionally, use journal instead of
osb->journal directly to simplify the code. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix double destroy_workqueue error
When gfs2_fill_super() fails, destroy_workqueue() is called within
gfs2_gl_hash_clear(), and the subsequent code path calls
destroy_workqueue() on the same work queue again.
This issue can be fixed by setting the work queue pointer to NULL after
the first destroy_workqueue() call and checking for a NULL pointer
before attempting to destroy the work queue again. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: battery: Fix possible crash when unregistering a battery hook
When a battery hook returns an error when adding a new battery, then
the battery hook is automatically unregistered.
However the battery hook provider cannot know that, so it will later
call battery_hook_unregister() on the already unregistered battery
hook, resulting in a crash.
Fix this by using the list head to mark already unregistered battery
hooks as already being unregistered so that they can be ignored by
battery_hook_unregister(). |
