| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A memory leak in the fsl_lpspi_probe() function in drivers/spi/spi-fsl-lpspi.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering pm_runtime_get_sync() failures, aka CID-057b8945f78f. NOTE: third parties dispute the relevance of this because an attacker cannot realistically control these failures at probe time |
| In drivers/char/virtio_console.c in the Linux kernel before 5.13.4, data corruption or loss can be triggered by an untrusted device that supplies a buf->len value exceeding the buffer size. NOTE: the vendor indicates that the cited data corruption is not a vulnerability in any existing use case; the length validation was added solely for robustness in the face of anomalous host OS behavior |
| drivers/bluetooth/virtio_bt.c in the Linux kernel before 5.16.3 has a memory leak (socket buffers have memory allocated but not freed). |
| Incorrect Default Permissions vulnerability in Hitachi Infrastructure Analytics Advisor on Linux (Analytics probe component), Hitachi Ops Center Analyzer on Linux (Analyzer probe component), Hitachi Ops Center Viewpoint on Linux (Viewpoint RAID Agent component) allows local users to read and write specific files.
This issue affects Hitachi Infrastructure Analytics Advisor: from 2.0.0-00 through 4.4.0-00; Hitachi Ops Center Analyzer: from 10.0.0-00 before 10.9.0-00; Hitachi Ops Center Viewpoint: from 10.8.0-00 before 10.9.0-00.
|
| An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU. |
| The Linux kernel before 6.5.4 has an es1 use-after-free in fs/ext4/extents_status.c, related to ext4_es_insert_extent. |
| Insertion of Sensitive Information into Temporary File vulnerability in Hitachi Infrastructure Analytics Advisor on Linux (Analytics probe component), Hitachi Ops Center Analyzer on Linux (Hitachi Ops Center Analyzer probe component) allows local users to gain sensitive information.
This issue affects Hitachi Infrastructure Analytics Advisor: from 2.0.0-00 through 4.4.0-00; Hitachi Ops Center Analyzer: from 10.0.0-00 before 10.9.0-00.
|
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up
The issue was caused by dput(upper) being called before
ovl_dentry_update_reval(), while upper->d_flags was still
accessed in ovl_dentry_remote().
Move dput(upper) after its last use to prevent use-after-free.
BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
ovl_link_up fs/overlayfs/copy_up.c:610 [inline]
ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170
ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223
ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136
vfs_rename+0xf84/0x20a0 fs/namei.c:4893
...
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: rcu protect dev->ax25_ptr
syzbot found a lockdep issue [1].
We should remove ax25 RTNL dependency in ax25_setsockopt()
This should also fix a variety of possible UAF in ax25.
[1]
WARNING: possible circular locking dependency detected
6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted
------------------------------------------------------
syz.5.1818/12806 is trying to acquire lock:
ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
but task is already holding lock:
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_AX25){+.+.}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x100 net/core/sock.c:3642
lock_sock include/net/sock.h:1618 [inline]
ax25_kill_by_device net/ax25/af_ax25.c:101 [inline]
ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146
notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026
dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563
dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820
sock_do_ioctl+0x240/0x460 net/socket.c:1234
sock_ioctl+0x626/0x8e0 net/socket.c:1339
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (rtnl_mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904
__lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735
ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680
do_sock_setsockopt+0x3af/0x720 net/socket.c:2324
__sys_setsockopt net/socket.c:2349 [inline]
__do_sys_setsockopt net/socket.c:2355 [inline]
__se_sys_setsockopt net/socket.c:2352 [inline]
__x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
lock(sk_lock-AF_AX25);
lock(rtnl_mutex);
*** DEADLOCK ***
1 lock held by syz.5.1818/12806:
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline]
#0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574
stack backtrace:
CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074
check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/lockin
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: davicom: fix UAF in dm9000_drv_remove
dm is netdev private data and it cannot be
used after free_netdev() call. Using dm after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
This is similar to the issue fixed in commit
ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove").
This bug is detected by our static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Explicitly verify target vCPU is online in kvm_get_vcpu()
Explicitly verify the target vCPU is fully online _prior_ to clamping the
index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will
generate '0', i.e. KVM will return vCPU0 instead of NULL.
In practice, the bug is unlikely to cause problems, as it will only come
into play if userspace or the guest is buggy or misbehaving, e.g. KVM may
send interrupts to vCPU0 instead of dropping them on the floor.
However, returning vCPU0 when it shouldn't exist per online_vcpus is
problematic now that KVM uses an xarray for the vCPUs array, as KVM needs
to insert into the xarray before publishing the vCPU to userspace (see
commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")),
i.e. before vCPU creation is guaranteed to succeed.
As a result, incorrectly providing access to vCPU0 will trigger a
use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu()
bails out of vCPU creation due to an error and frees vCPU0. Commit
afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but
in doing so introduced an unsolvable teardown conundrum. Preventing
accesses to vCPU0 before it's fully online will allow reverting commit
afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Add NULL check in mt_input_configured
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fix double free in atmel_pmecc_create_user()
The "user" pointer was converted from being allocated with kzalloc() to
being allocated by devm_kzalloc(). Calling kfree(user) will lead to a
double free. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential deadlock in f2fs_record_stop_reason()
syzbot reports deadlock issue of f2fs as below:
======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc3-syzkaller-00087-gc964ced77262 #0 Not tainted
------------------------------------------------------
kswapd0/79 is trying to acquire lock:
ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_down_write fs/f2fs/f2fs.h:2199 [inline]
ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_record_stop_reason+0x52/0x1d0 fs/f2fs/super.c:4068
but task is already holding lock:
ffff88804bd92610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (sb_internal#2){.+.+}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write include/linux/fs.h:1716 [inline]
sb_start_intwrite+0x4d/0x1c0 include/linux/fs.h:1899
f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842
evict+0x4e8/0x9b0 fs/inode.c:725
f2fs_evict_inode+0x1a4/0x15c0 fs/f2fs/inode.c:807
evict+0x4e8/0x9b0 fs/inode.c:725
dispose_list fs/inode.c:774 [inline]
prune_icache_sb+0x239/0x2f0 fs/inode.c:963
super_cache_scan+0x38c/0x4b0 fs/super.c:223
do_shrink_slab+0x701/0x1160 mm/shrinker.c:435
shrink_slab+0x1093/0x14d0 mm/shrinker.c:662
shrink_one+0x43b/0x850 mm/vmscan.c:4818
shrink_many mm/vmscan.c:4879 [inline]
lru_gen_shrink_node mm/vmscan.c:4957 [inline]
shrink_node+0x3799/0x3de0 mm/vmscan.c:5937
kswapd_shrink_node mm/vmscan.c:6765 [inline]
balance_pgdat mm/vmscan.c:6957 [inline]
kswapd+0x1ca3/0x3700 mm/vmscan.c:7226
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #1 (fs_reclaim){+.+.}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__fs_reclaim_acquire mm/page_alloc.c:3834 [inline]
fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3848
might_alloc include/linux/sched/mm.h:318 [inline]
prepare_alloc_pages+0x147/0x5b0 mm/page_alloc.c:4493
__alloc_pages_noprof+0x16f/0x710 mm/page_alloc.c:4722
alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265
alloc_pages_noprof mm/mempolicy.c:2345 [inline]
folio_alloc_noprof+0x128/0x180 mm/mempolicy.c:2352
filemap_alloc_folio_noprof+0xdf/0x500 mm/filemap.c:1010
do_read_cache_folio+0x2eb/0x850 mm/filemap.c:3787
read_mapping_folio include/linux/pagemap.h:1011 [inline]
f2fs_commit_super+0x3c0/0x7d0 fs/f2fs/super.c:4032
f2fs_record_stop_reason+0x13b/0x1d0 fs/f2fs/super.c:4079
f2fs_handle_critical_error+0x2ac/0x5c0 fs/f2fs/super.c:4174
f2fs_write_inode+0x35f/0x4d0 fs/f2fs/inode.c:785
write_inode fs/fs-writeback.c:1503 [inline]
__writeback_single_inode+0x711/0x10d0 fs/fs-writeback.c:1723
writeback_single_inode+0x1f3/0x660 fs/fs-writeback.c:1779
sync_inode_metadata+0xc4/0x120 fs/fs-writeback.c:2849
f2fs_release_file+0xa8/0x100 fs/f2fs/file.c:1941
__fput+0x23f/0x880 fs/file_table.c:431
task_work_run+0x24f/0x310 kernel/task_work.c:228
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy()
pci_epc_destroy() invokes pci_bus_release_domain_nr() to release the PCI
domain ID, but there are two issues:
- 'epc->dev' is passed to pci_bus_release_domain_nr() which was already
freed by device_unregister(), leading to a use-after-free issue.
- Domain ID corresponds to the EPC device parent, so passing 'epc->dev'
is also wrong.
Fix these issues by passing 'epc->dev.parent' to
pci_bus_release_domain_nr() and also do it before device_unregister().
[mani: reworded subject and description] |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix use-after-free of nreq in reqsk_timer_handler().
The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with
__inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler().
Then, oreq should be passed to reqsk_put() instead of req; otherwise
use-after-free of nreq could happen when reqsk is migrated but the
retry attempt failed (e.g. due to timeout).
Let's pass oreq to reqsk_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in SMB request handling
A race condition exists between SMB request handling in
`ksmbd_conn_handler_loop()` and the freeing of `ksmbd_conn` in the
workqueue handler `handle_ksmbd_work()`. This leads to a UAF.
- KASAN: slab-use-after-free Read in handle_ksmbd_work
- KASAN: slab-use-after-free in rtlock_slowlock_locked
This race condition arises as follows:
- `ksmbd_conn_handler_loop()` waits for `conn->r_count` to reach zero:
`wait_event(conn->r_count_q, atomic_read(&conn->r_count) == 0);`
- Meanwhile, `handle_ksmbd_work()` decrements `conn->r_count` using
`atomic_dec_return(&conn->r_count)`, and if it reaches zero, calls
`ksmbd_conn_free()`, which frees `conn`.
- However, after `handle_ksmbd_work()` decrements `conn->r_count`,
it may still access `conn->r_count_q` in the following line:
`waitqueue_active(&conn->r_count_q)` or `wake_up(&conn->r_count_q)`
This results in a UAF, as `conn` has already been freed.
The discovery of this UAF can be referenced in the following PR for
syzkaller's support for SMB requests. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: terminate outstanding dump on socket close
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.
The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.
Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.
The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.
Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Fix accept_queue memory leak
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30 |
