| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In certain highly specific configurations of the host system and MongoDB server binary installation on Linux Operating Systems, it may be possible for a unintended actor with host-level access to cause the MongoDB Server binary to load unintended actor-controlled shared libraries when the server binary is started, potentially resulting in the unintended actor gaining full control over the MongoDB server process. This issue affects MongoDB Server v5.0 versions prior to 5.0.14 and MongoDB Server v6.0 versions prior to 6.0.3.
Required Configuration: Only environments with Linux as the underlying operating system is affected by this issue |
| In the Linux kernel through 6.2.7, fs/ntfs3/inode.c has an invalid kfree because it does not validate MFT flags before replaying logs. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: put bpf_link's program when link is safe to be deallocated
In general, BPF link's underlying BPF program should be considered to be
reachable through attach hook -> link -> prog chain, and, pessimistically,
we have to assume that as long as link's memory is not safe to free,
attach hook's code might hold a pointer to BPF program and use it.
As such, it's not (generally) correct to put link's program early before
waiting for RCU GPs to go through. More eager bpf_prog_put() that we
currently do is mostly correct due to BPF program's release code doing
similar RCU GP waiting, but as will be shown in the following patches,
BPF program can be non-sleepable (and, thus, reliant on only "classic"
RCU GP), while BPF link's attach hook can have sleepable semantics and
needs to be protected by RCU Tasks Trace, and for such cases BPF link
has to go through RCU Tasks Trace + "classic" RCU GPs before being
deallocated. And so, if we put BPF program early, we might free BPF
program before we free BPF link, leading to use-after-free situation.
So, this patch defers bpf_prog_put() until we are ready to perform
bpf_link's deallocation. At worst, this delays BPF program freeing by
one extra RCU GP, but that seems completely acceptable. Alternatively,
we'd need more elaborate ways to determine BPF hook, BPF link, and BPF
program lifetimes, and how they relate to each other, which seems like
an unnecessary complication.
Note, for most BPF links we still will perform eager bpf_prog_put() and
link dealloc, so for those BPF links there are no observable changes
whatsoever. Only BPF links that use deferred dealloc might notice
slightly delayed freeing of BPF programs.
Also, to reduce code and logic duplication, extract program put + link
dealloc logic into bpf_link_dealloc() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: fix reference counting on zcrypt card objects
Tests with hot-plugging crytpo cards on KVM guests with debug
kernel build revealed an use after free for the load field of
the struct zcrypt_card. The reason was an incorrect reference
handling of the zcrypt card object which could lead to a free
of the zcrypt card object while it was still in use.
This is an example of the slab message:
kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b
kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43
kernel: kmalloc_trace+0x3f2/0x470
kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt]
kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4]
kernel: ap_device_probe+0x15c/0x290
kernel: really_probe+0xd2/0x468
kernel: driver_probe_device+0x40/0xf0
kernel: __device_attach_driver+0xc0/0x140
kernel: bus_for_each_drv+0x8c/0xd0
kernel: __device_attach+0x114/0x198
kernel: bus_probe_device+0xb4/0xc8
kernel: device_add+0x4d2/0x6e0
kernel: ap_scan_adapter+0x3d0/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43
kernel: kfree+0x37e/0x418
kernel: zcrypt_card_put+0x54/0x80 [zcrypt]
kernel: ap_device_remove+0x4c/0xe0
kernel: device_release_driver_internal+0x1c4/0x270
kernel: bus_remove_device+0x100/0x188
kernel: device_del+0x164/0x3c0
kernel: device_unregister+0x30/0x90
kernel: ap_scan_adapter+0xc8/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: kthread+0x150/0x168
kernel: __ret_from_fork+0x3c/0x58
kernel: ret_from_fork+0xa/0x30
kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff)
kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88
kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........
kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk.
kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........
kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2
kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux)
kernel: Call Trace:
kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120
kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140
kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8
kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8
kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0
kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8
kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8
kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590
kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0
kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0
kernel:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: gadget: don't reset gadget's driver->bus
UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:
dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
module_add_driver from bus_add_driver+0xf4/0x1e4
bus_add_driver from driver_register+0x78/0x10c
driver_register from usb_gadget_register_driver_owner+0x40/0xb4
usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
do_one_initcall from do_init_module+0x44/0x1c8
do_init_module from load_module+0x19b8/0x1b9c
load_module from sys_finit_module+0xdc/0xfc
sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---
Fix this by removing driver->bus entry reset. |
| A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code. |
| Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code. |
| A use-after-free in the mac80211 stack when parsing a multi-BSSID element in the Linux kernel 5.2 through 5.19.x before 5.19.16 could be used by attackers (able to inject WLAN frames) to crash the kernel and potentially execute code. |
| Improper Verification of Cryptographic Signature vulnerability in Snow Software Inventory Agent on MacOS, Snow Software Inventory Agent on Windows, Snow Software Inventory Agent on Linux allows File Manipulation through Snow Update Packages.This issue affects Inventory Agent: through 6.12.0; Inventory Agent: through 6.14.5; Inventory Agent: through 6.7.2.
|
| An issue was discovered in the Linux kernel before 5.19.16. Attackers able to inject WLAN frames could cause a buffer overflow in the ieee80211_bss_info_update function in net/mac80211/scan.c. |
| This vulnerability could allow a remote attacker to execute remote commands with improper validation of parameters of certain API constructors. Remote attackers could use this vulnerability to execute malicious commands such as directory traversal. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized
This commit fixes a bug (found by syzkaller) that could cause spurious
double-initializations for congestion control modules, which could cause
memory leaks or other problems for congestion control modules (like CDG)
that allocate memory in their init functions.
The buggy scenario constructed by syzkaller was something like:
(1) create a TCP socket
(2) initiate a TFO connect via sendto()
(3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION),
which calls:
tcp_set_congestion_control() ->
tcp_reinit_congestion_control() ->
tcp_init_congestion_control()
(4) receive ACK, connection is established, call tcp_init_transfer(),
set icsk_ca_initialized=0 (without first calling cc->release()),
call tcp_init_congestion_control() again.
Note that in this sequence tcp_init_congestion_control() is called
twice without a cc->release() call in between. Thus, for CC modules
that allocate memory in their init() function, e.g, CDG, a memory leak
may occur. The syzkaller tool managed to find a reproducer that
triggered such a leak in CDG.
The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init
congestion control if not initialized already")
introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in
tcp_init_transfer(), missing the possibility for a sequence like the
one above, where a process could call setsockopt(TCP_CONGESTION) in
state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()),
which would call tcp_init_congestion_control(). It did not intend to
reset any initialization that the user had already explicitly made;
it just missed the possibility of that particular sequence (which
syzkaller managed to find). |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/sync_file: Don't leak fences on merge failure
Each add_fence() call does a dma_fence_get() on the relevant fence. In
the error path, we weren't calling dma_fence_put() so all those fences
got leaked. Also, in the krealloc_array failure case, we weren't
freeing the fences array. Instead, ensure that i and fences are always
zero-initialized and dma_fence_put() all the fences and kfree(fences) on
every error path. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: fsl_ifc: fix leak of IO mapping on probe failure
On probe error the driver should unmap the IO memory. Smatch reports:
drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT
Fix an Oopsable condition in pnfs_mark_request_commit() when we're
putting a set of writes on the commit list to reschedule them after a
failed pNFS attempt. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/bpf: Fix detecting BPF atomic instructions
Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other
atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to
distinguish instructions based on the immediate field. Existing JIT
implementations were updated to check for the immediate field and to
reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH)
in the immediate field.
However, the check added to powerpc64 JIT did not look at the correct
BPF instruction. Due to this, such programs would be accepted and
incorrectly JIT'ed resulting in soft lockups, as seen with the atomic
bounds test. Fix this by looking at the correct immediate value. |
| In the Linux kernel, the following vulnerability has been resolved:
smackfs: restrict bytes count in smk_set_cipso()
Oops, I failed to update subject line.
From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001
Date: Mon, 12 Apr 2021 22:25:06 +0900
Subject: [PATCH] smackfs: restrict bytes count in smk_set_cipso()
Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write
functions") missed that count > SMK_CIPSOMAX check applies to only
format == SMK_FIXED24_FMT case. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix GPF in diFree
Avoid passing inode with
JFS_SBI(inode->i_sb)->ipimap == NULL to
diFree()[1]. GFP will appear:
struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap;
struct inomap *imap = JFS_IP(ipimap)->i_imap;
JFS_IP() will return invalid pointer when ipimap == NULL
Call Trace:
diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1]
jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154
evict+0x2ed/0x750 fs/inode.c:578
iput_final fs/inode.c:1654 [inline]
iput.part.0+0x3fe/0x820 fs/inode.c:1680
iput+0x58/0x70 fs/inode.c:1670 |
| In the Linux kernel, the following vulnerability has been resolved:
dm btree remove: assign new_root only when removal succeeds
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix races between xattr_{set|get} and listxattr operations
UBIFS may occur some problems with concurrent xattr_{set|get} and
listxattr operations, such as assertion failure, memory corruption,
stale xattr value[1].
Fix it by importing a new rw-lock in @ubifs_inode to serilize write
operations on xattr, concurrent read operations are still effective,
just like ext4.
[1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com |
