| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix ib block iterator counter overflow
When registering a new DMA MR after selecting the best aligned page size
for it, we iterate over the given sglist to split each entry to smaller,
aligned to the selected page size, DMA blocks.
In given circumstances where the sg entry and page size fit certain
sizes and the sg entry is not aligned to the selected page size, the
total size of the aligned pages we need to cover the sg entry is >= 4GB.
Under this circumstances, while iterating page aligned blocks, the
counter responsible for counting how much we advanced from the start of
the sg entry is overflowed because its type is u32 and we pass 4GB in
size. This can lead to an infinite loop inside the iterator function
because the overflow prevents the counter to be larger
than the size of the sg entry.
Fix the presented problem by changing the advancement condition to
eliminate overflow.
Backtrace:
[ 192.374329] efa_reg_user_mr_dmabuf
[ 192.376783] efa_register_mr
[ 192.382579] pgsz_bitmap 0xfffff000 rounddown 0x80000000
[ 192.386423] pg_sz [0x80000000] umem_length[0xc0000000]
[ 192.392657] start 0x0 length 0xc0000000 params.page_shift 31 params.page_num 3
[ 192.399559] hp_cnt[3], pages_in_hp[524288]
[ 192.403690] umem->sgt_append.sgt.nents[1]
[ 192.407905] number entries: [1], pg_bit: [31]
[ 192.411397] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.415601] biter->__sg_advance [665837568] sg_dma_len[3221225472]
[ 192.419823] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.423976] biter->__sg_advance [2813321216] sg_dma_len[3221225472]
[ 192.428243] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8]
[ 192.432397] biter->__sg_advance [665837568] sg_dma_len[3221225472] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| A vulnerability was found in HobbesOSR Kitten up to c4f8b7c3158983d1020af432be1b417b28686736 and classified as critical. Affected by this issue is the function set_pte_at in the library /include/arch-arm64/pgtable.h. The manipulation leads to resource consumption. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8mp-blk-ctrl: add missing loop break condition
Currently imx8mp_blk_ctrl_remove() will continue the for loop
until an out-of-bounds exception occurs.
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dev_pm_domain_detach+0x8/0x48
lr : imx8mp_blk_ctrl_shutdown+0x58/0x90
sp : ffffffc084f8bbf0
x29: ffffffc084f8bbf0 x28: ffffff80daf32ac0 x27: 0000000000000000
x26: ffffffc081658d78 x25: 0000000000000001 x24: ffffffc08201b028
x23: ffffff80d0db9490 x22: ffffffc082340a78 x21: 00000000000005b0
x20: ffffff80d19bc180 x19: 000000000000000a x18: ffffffffffffffff
x17: ffffffc080a39e08 x16: ffffffc080a39c98 x15: 4f435f464f006c72
x14: 0000000000000004 x13: ffffff80d0172110 x12: 0000000000000000
x11: ffffff80d0537740 x10: ffffff80d05376c0 x9 : ffffffc0808ed2d8
x8 : ffffffc084f8bab0 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffffff80d19b9420 x4 : fffffffe03466e60 x3 : 0000000080800077
x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000
Call trace:
dev_pm_domain_detach+0x8/0x48
platform_shutdown+0x2c/0x48
device_shutdown+0x158/0x268
kernel_restart_prepare+0x40/0x58
kernel_kexec+0x58/0xe8
__do_sys_reboot+0x198/0x258
__arm64_sys_reboot+0x2c/0x40
invoke_syscall+0x5c/0x138
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x38/0xc8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
Code: 8128c2d0 ffffffc0 aa1e03e9 d503201f |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A flaw was found in the QEMU built-in VNC server while processing ClientCutText messages. A wrong exit condition may lead to an infinite loop when inflating an attacker controlled zlib buffer in the `inflate_buffer` function. This could allow a remote authenticated client who is able to send a clipboard to the VNC server to trigger a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Avoid writeback threads getting stuck in mempool_alloc()
In a low memory situation, allow the NFS writeback code to fail without
getting stuck in infinite loops in mempool_alloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent tailcall infinite loop caused by freplace
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix possible stall on recvmsg()
recvmsg() can enter an infinite loop if the caller provides the
MSG_WAITALL, the data present in the receive queue is not sufficient to
fulfill the request, and no more data is received by the peer.
When the above happens, mptcp_wait_data() will always return with
no wait, as the MPTCP_DATA_READY flag checked by such function is
set and never cleared in such code path.
Leveraging the above syzbot was able to trigger an RCU stall:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1
(t=10500 jiffies g=13089 q=109)
rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000
Call Trace:
context_switch kernel/sched/core.c:4955 [inline]
__schedule+0x940/0x26f0 kernel/sched/core.c:6236
schedule+0xd3/0x270 kernel/sched/core.c:6315
schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955
rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline]
RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline]
RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline]
RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline]
RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline]
RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189
Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00
RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283
RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870
RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877
R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000
R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000
FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline]
mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016
release_sock+0xb4/0x1b0 net/core/sock.c:3204
mptcp_wait_data net/mptcp/protocol.c:1770 [inline]
mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080
inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659
sock_recvmsg_nosec net/socket.c:944 [inline]
____sys_recvmsg+0x527/0x600 net/socket.c:2626
___sys_recvmsg+0x127/0x200 net/socket.c:2670
do_recvmmsg+0x24d/0x6d0 net/socket.c:2764
__sys_recvmmsg net/socket.c:2843 [inline]
__do_sys_recvmmsg net/socket.c:2866 [inline]
__se_sys_recvmmsg net/socket.c:2859 [inline]
__x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc200d2
---truncated--- |
| hutool-core v5.8.23 was discovered to contain an infinite loop in the StrSplitter.splitByRegex function. This vulnerability allows attackers to cause a Denial of Service (DoS) via manipulation of the first two parameters. |
| GNOME libsoup before 3.6.1 has an infinite loop, and memory consumption. during the reading of certain patterns of WebSocket data from clients. |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A malicious actor can send a IEEE 802.15.4 packet with spoofed length byte and optionally spoofed FCS, which eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made. |
| A vulnerability has been identified in Teamcenter V12.4 (All versions < V12.4.0.15), Teamcenter V13.0 (All versions < V13.0.0.10), Teamcenter V13.1 (All versions < V13.1.0.10), Teamcenter V13.2 (All versions < V13.2.0.9), Teamcenter V13.3 (All versions < V13.3.0.5), Teamcenter V14.0 (All versions < V14.0.0.2). File Server Cache service in Teamcenter is vulnerable to denial of service by entering infinite loops and using up CPU cycles. This could allow an attacker to cause denial of service condition. |
| A vulnerability was found in libX11 due to an infinite loop within the PutSubImage() function. This flaw allows a local user to consume all available system resources and cause a denial of service condition. |
| An infinite loop vulnerability was found in Samba's mdssvc RPC service for Spotlight. When parsing Spotlight mdssvc RPC packets sent by the client, the core unmarshalling function sl_unpack_loop() did not validate a field in the network packet that contains the count of elements in an array-like structure. By passing 0 as the count value, the attacked function will run in an endless loop consuming 100% CPU. This flaw allows an attacker to issue a malformed RPC request, triggering an infinite loop, resulting in a denial of service condition. |
| GeoServer is an open source server that allows users to share and edit geospatial data. Malicious Jiffle scripts can be executed by GeoServer, either as a rendering transformation in WMS dynamic styles or as a WPS process, that can enter an infinite loop to trigger denial of service. This vulnerability is fixed in 2.27.0, 2.26.3, and 2.25.7. This vulnerability can be mitigated by disabling WMS dynamic styling and the Jiffle process. |
| aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. In affected versions an attacker can send a specially crafted POST (multipart/form-data) request. When the aiohttp server processes it, the server will enter an infinite loop and be unable to process any further requests. An attacker can stop the application from serving requests after sending a single request. This issue has been addressed in version 3.9.4. Users are advised to upgrade. Users unable to upgrade may manually apply a patch to their systems. Please see the linked GHSA for instructions. |
| This vulnerability allows any attacker to cause the PeerTube server to stop responding to requests due to an infinite loop in the "inbox" endpoint when receiving crafted ActivityPub activities. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
| An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet. |
