| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Check encryption key size on incoming connection
This is required for passing GAP/SEC/SEM/BI-04-C PTS test case:
Security Mode 4 Level 4, Responder - Invalid Encryption Key Size
- 128 bit
This tests the security key with size from 1 to 15 bytes while the
Security Mode 4 Level 4 requests 16 bytes key size.
Currently PTS fails with the following logs:
- expected:Connection Response:
Code: [3 (0x03)] Code
Identifier: (lt)WildCard: Exists(gt)
Length: [8 (0x0008)]
Destination CID: (lt)WildCard: Exists(gt)
Source CID: [64 (0x0040)]
Result: [3 (0x0003)] Connection refused - Security block
Status: (lt)WildCard: Exists(gt),
but received:Connection Response:
Code: [3 (0x03)] Code
Identifier: [1 (0x01)]
Length: [8 (0x0008)]
Destination CID: [64 (0x0040)]
Source CID: [64 (0x0040)]
Result: [0 (0x0000)] Connection Successful
Status: [0 (0x0000)] No further information available
And HCI logs:
< HCI Command: Read Encrypti.. (0x05|0x0008) plen 2
Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Success (0x00)
Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
Key size: 7
> ACL Data RX: Handle 14 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 1 len 4
PSM: 4097 (0x1001)
Source CID: 64
< ACL Data TX: Handle 14 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 1 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000) |
| Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an execution with unnecessary privileges vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to elevation of privileges. |
| Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an execution with unnecessary privileges vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Dell PowerScale OneFS, versions 9.10.0.0 through 9.10.1.5 and versions 9.11.0.0 through 9.12.0.1, contains an external control of system or configuration setting vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to protection mechanism bypass. |
| Dell PowerScale OneFS, version 9.13.0.0, contains an overly restrictive account lockout mechanism vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. |
| A flaw has been found in D-Link DIR-868L 110b03. This affects the function sub_1BF84 of the component SSDP Service. This manipulation of the argument ST causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability has been found in itsourcecode College Management System 1.0. This vulnerability affects unknown code of the file /admin/student-fee.php. Such manipulation of the argument roll_no leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| Sourcecodester Pharmacy Point of Sale System v1.0 is vulnerable to SQL Injection in /pharmacy/manage_product.php. |
| Tenda AX3 firmware v16.03.12.11 contains a stack overflow in formGetIptv function and the list parameter, which can cause memory corruption and enable remote code execution. |
| Sourcecodester Online Men's Salon Management System v1.0 is vulnerable to SQL Injection in /classes/Master.php?f=delete_service. |
| Sourcecodester Online Men's Salon Management System v1.0 is vulnerable to SQL Injection in /msms/admin/appointments/view_appointment.php. |
| Sourcecodester Online Men's Salon Management System v1.0 is vulnerable to SQL Injection in /msms/classes/Master.php?f=delete_appointment. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, additional exploits in the expression evaluation of n8n have been identified and patched following CVE-2025-68613. An authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| A Reflected Cross-Site Scripting (XSS) vulnerability in the /IDC_Logging/index.cgi endpoint of International Datacasting Corporation (IDC) SFX Series SuperFlex SatelliteReceiver Web Management Interface version 101 allows a remote attacker to execute arbitrary web scripts or HTML. The vulnerability is triggered by sending a crafted payload through the `submitType` parameter, which is reflected directly into the DOM without proper escaping. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler
Naresh Kamboju reported a "Bad frame pointer" kernel warning while
running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the
same issue with the following command:
```
$ cd /sys/kernel/debug/tracing
$ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events
$ echo 1 > events/fprobes/enable
$ echo 1 > tracing_on
$ sleep 1
```
And we can get the following kernel warning:
[ 127.692888] ------------[ cut here ]------------
[ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000
[ 127.693755] from func do_nanosleep return to ffffffff800ccb16
[ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be
[ 127.699894] Modules linked in:
[ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32
[ 127.701453] Hardware name: riscv-virtio,qemu (DT)
[ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be
[ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be
[ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10
[ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000
[ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80
[ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20
[ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000
[ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038
[ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0
[ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068
[ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001
[ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e
[ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18
[ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003
[ 127.703292] [<ffffffff8013b5e0>] ftrace_return_to_handler+0x1b2/0x1be
[ 127.703760] [<ffffffff80017bce>] return_to_handler+0x16/0x26
[ 127.704009] [<ffffffff80017bb8>] return_to_handler+0x0/0x26
[ 127.704057] [<ffffffff800d3352>] common_nsleep+0x42/0x54
[ 127.704117] [<ffffffff800d44a2>] __riscv_sys_clock_nanosleep+0xba/0x10a
[ 127.704176] [<ffffffff80901c56>] do_trap_ecall_u+0x188/0x218
[ 127.704295] [<ffffffff8090cc3e>] handle_exception+0x14a/0x156
[ 127.705436] ---[ end trace 0000000000000000 ]---
The reason is that the stack layout for constructing argument for the
ftrace_return_to_handler in the return_to_handler does not match the
__arch_ftrace_regs structure of riscv, leading to unexpected results. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: lan78xx: Fix double free issue with interrupt buffer allocation
In lan78xx_probe(), the buffer `buf` was being freed twice: once
implicitly through `usb_free_urb(dev->urb_intr)` with the
`URB_FREE_BUFFER` flag and again explicitly by `kfree(buf)`. This caused
a double free issue.
To resolve this, reordered `kmalloc()` and `usb_alloc_urb()` calls to
simplify the initialization sequence and removed the redundant
`kfree(buf)`. Now, `buf` is allocated after `usb_alloc_urb()`, ensuring
it is correctly managed by `usb_fill_int_urb()` and freed by
`usb_free_urb()` as intended. |
| Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an uncontrolled search path element vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to denial of service, elevation of privileges, and information disclosure. |
| Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an execution with unnecessary privileges vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to denial of service, elevation of privileges, and information disclosure. |
| Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an incorrect privilege assignment vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an incorrect default permissions vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to code execution, denial of service, elevation of privileges, and information disclosure. |
