| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-eth: retrieve the virtual address before dma_unmap
The TSO header was DMA unmapped before the virtual address was retrieved
and then used to free the buffer. This meant that we were actually
removing the DMA map and then trying to search for it to help in
retrieving the virtual address. This lead to a invalid virtual address
being used in the kfree call.
Fix this by calling dpaa2_iova_to_virt() prior to the dma_unmap call.
[ 487.231819] Unable to handle kernel paging request at virtual address fffffd9807000008
(...)
[ 487.354061] Hardware name: SolidRun LX2160A Honeycomb (DT)
[ 487.359535] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 487.366485] pc : kfree+0xac/0x304
[ 487.369799] lr : kfree+0x204/0x304
[ 487.373191] sp : ffff80000c4eb120
[ 487.376493] x29: ffff80000c4eb120 x28: ffff662240c46400 x27: 0000000000000001
[ 487.383621] x26: 0000000000000001 x25: ffff662246da0cc0 x24: ffff66224af78000
[ 487.390748] x23: ffffad184f4ce008 x22: ffffad1850185000 x21: ffffad1838d13cec
[ 487.397874] x20: ffff6601c0000000 x19: fffffd9807000000 x18: 0000000000000000
[ 487.405000] x17: ffffb910cdc49000 x16: ffffad184d7d9080 x15: 0000000000004000
[ 487.412126] x14: 0000000000000008 x13: 000000000000ffff x12: 0000000000000000
[ 487.419252] x11: 0000000000000004 x10: 0000000000000001 x9 : ffffad184d7d927c
[ 487.426379] x8 : 0000000000000000 x7 : 0000000ffffffd1d x6 : ffff662240a94900
[ 487.433505] x5 : 0000000000000003 x4 : 0000000000000009 x3 : ffffad184f4ce008
[ 487.440632] x2 : ffff662243eec000 x1 : 0000000100000100 x0 : fffffc0000000000
[ 487.447758] Call trace:
[ 487.450194] kfree+0xac/0x304
[ 487.453151] dpaa2_eth_free_tx_fd.isra.0+0x33c/0x3e0 [fsl_dpaa2_eth]
[ 487.459507] dpaa2_eth_tx_conf+0x100/0x2e0 [fsl_dpaa2_eth]
[ 487.464989] dpaa2_eth_poll+0xdc/0x380 [fsl_dpaa2_eth] |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: move the EST lock to struct stmmac_priv
Reinitialize the whole EST structure would also reset the mutex
lock which is embedded in the EST structure, and then trigger
the following warning. To address this, move the lock to struct
stmmac_priv. We also need to reacquire the mutex lock when doing
this initialization.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068
Modules linked in:
CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0xd84/0x1068
lr : __mutex_lock+0xd84/0x1068
sp : ffffffc0864e3570
x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003
x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac
x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff
x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000
x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8
x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698
x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001
x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027
x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
__mutex_lock+0xd84/0x1068
mutex_lock_nested+0x28/0x34
tc_setup_taprio+0x118/0x68c
stmmac_setup_tc+0x50/0xf0
taprio_change+0x868/0xc9c |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Clean up hash direct_functions on register failures
We see the following GPF when register_ftrace_direct fails:
[ ] general protection fault, probably for non-canonical address \
0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[...]
[ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70
[ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...]
[ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206
[ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b
[ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0
[ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001
[ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0
[ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000
[ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000
[ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0
[ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ ] Call Trace:
[ ] <TASK>
[ ] register_ftrace_direct+0x54/0x290
[ ] ? render_sigset_t+0xa0/0xa0
[ ] bpf_trampoline_update+0x3f5/0x4a0
[ ] ? 0xffffffffa00a3000
[ ] bpf_trampoline_link_prog+0xa9/0x140
[ ] bpf_tracing_prog_attach+0x1dc/0x450
[ ] bpf_raw_tracepoint_open+0x9a/0x1e0
[ ] ? find_held_lock+0x2d/0x90
[ ] ? lock_release+0x150/0x430
[ ] __sys_bpf+0xbd6/0x2700
[ ] ? lock_is_held_type+0xd8/0x130
[ ] __x64_sys_bpf+0x1c/0x20
[ ] do_syscall_64+0x3a/0x80
[ ] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ ] RIP: 0033:0x7fa9421defa9
[ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...]
[ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
[ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9
[ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011
[ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000
[ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001
[ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001
[ ] </TASK>
[ ] Modules linked in: klp_vm(OK)
[ ] ---[ end trace 0000000000000000 ]---
One way to trigger this is:
1. load a livepatch that patches kernel function xxx;
2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now);
3. repeat #2 => gpf.
This is because the entry is added to direct_functions, but not removed.
Fix this by remove the entry from direct_functions when
register_ftrace_direct fails.
Also remove the last trailing space from ftrace.c, so we don't have to
worry about it anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: mxs-auart: add spinlock around changing cts state
The uart_handle_cts_change() function in serial_core expects the caller
to hold uport->lock. For example, I have seen the below kernel splat,
when the Bluetooth driver is loaded on an i.MX28 board.
[ 85.119255] ------------[ cut here ]------------
[ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec
[ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs
[ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1
[ 85.151396] Hardware name: Freescale MXS (Device Tree)
[ 85.156679] Workqueue: hci0 hci_power_on [bluetooth]
(...)
[ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4
[ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210
(...) |
| In the Linux kernel, the following vulnerability has been resolved:
media: intel/ipu6: remove cpu latency qos request on error
Fix cpu latency qos list corruption like below. It happens when
we do not remove cpu latency request on error path and free
corresponding memory.
[ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8).
[ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0
<snip>
[ 30.634640] l7 kernel: Call Trace:
[ 30.634650] l7 kernel: <TASK>
[ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6
[ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634690] l7 kernel: ? report_bug+0xff/0x140
[ 30.634702] l7 kernel: ? handle_bug+0x58/0x90
[ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70
[ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20
[ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634742] l7 kernel: plist_add+0xdd/0x140
[ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0
[ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0
[ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
<...>
[ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
[ 74.533214] EXT4-fs (loop3): shut down requested (2)
[ 74.536705] Aborting journal on device loop3-8.
[ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
[ 74.703727] Faulting instruction address: 0xc0000000007bffb8
cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060]
pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
sp: c000000015db7300
msr: 800000000280b033
dar: c00000005e980000
dsisr: 40000000
current = 0xc000000027af6880
paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01
pid = 5167, comm = mount
<...>
enter ? for help
[c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410
[c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000
[c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0
[c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0
[c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0
[c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10
[c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350
[c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40
[c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100
[c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70
[c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550
[c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0
[c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs/zmap.c: Fix incorrect offset calculation
Effective offset to add to length was being incorrectly calculated,
which resulted in iomap->length being set to 0, triggering a WARN_ON
in iomap_iter_done().
Fix that, and describe it in comments.
This was reported as a crash by syzbot under an issue about a warning
encountered in iomap_iter_done(), but unrelated to erofs.
C reproducer: https://syzkaller.appspot.com/text?tag=ReproC&x=1037a6b2880000
Kernel config: https://syzkaller.appspot.com/text?tag=KernelConfig&x=e2021a61197ebe02
Dashboard link: https://syzkaller.appspot.com/bug?extid=a8e049cd3abd342936b6 |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: use virtio_device_ready() in virtio_device_restore()
After waking up a suspended VM, the kernel prints the following trace
for virtio drivers which do not directly call virtio_device_ready() in
the .restore:
PM: suspend exit
irq 22: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ>
dump_stack_lvl+0x38/0x49
dump_stack+0x10/0x12
__report_bad_irq+0x3a/0xaf
note_interrupt.cold+0xb/0x60
handle_irq_event+0x71/0x80
handle_fasteoi_irq+0x95/0x1e0
__common_interrupt+0x6b/0x110
common_interrupt+0x63/0xe0
asm_common_interrupt+0x1e/0x40
? __do_softirq+0x75/0x2f3
irq_exit_rcu+0x93/0xe0
sysvec_apic_timer_interrupt+0xac/0xd0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20
arch_cpu_idle+0x12/0x20
default_idle_call+0x39/0xf0
do_idle+0x1b5/0x210
cpu_startup_entry+0x20/0x30
start_secondary+0xf3/0x100
secondary_startup_64_no_verify+0xc3/0xcb
</TASK>
handlers:
[<000000008f9bac49>] vp_interrupt
[<000000008f9bac49>] vp_interrupt
Disabling IRQ #22
This happens because we don't invoke .enable_cbs callback in
virtio_device_restore(). That callback is used by some transports
(e.g. virtio-pci) to enable interrupts.
Let's fix it, by calling virtio_device_ready() as we do in
virtio_dev_probe(). This function calls .enable_cts callback and sets
DRIVER_OK status bit.
This fix also avoids setting DRIVER_OK twice for those drivers that
call virtio_device_ready() in the .restore. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: split tx timer into transmission and timeout
The timer for the transmission of isotp PDUs formerly had two functions:
1. send two consecutive frames with a given time gap
2. monitor the timeouts for flow control frames and the echo frames
This led to larger txstate checks and potentially to a problem discovered
by syzbot which enabled the panic_on_warn feature while testing.
The former 'txtimer' function is split into 'txfrtimer' and 'txtimer'
to handle the two above functionalities with separate timer callbacks.
The two simplified timers now run in one-shot mode and make the state
transitions (especially with isotp_rcv_echo) better understandable. |
| In the Linux kernel, the following vulnerability has been resolved:
fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
The freeing of relinquished volume will wake up the pending volume
acquisition by using wake_up_bit(), however it is mismatched with
wait_var_event() used in fscache_wait_on_volume_collision() and it will
never wake up the waiter in the wait-queue because these two functions
operate on different wait-queues.
According to the implementation in fscache_wait_on_volume_collision(),
if the wake-up of pending acquisition is delayed longer than 20 seconds
(e.g., due to the delay of on-demand fd closing), the first
wait_var_event_timeout() will timeout and the following wait_var_event()
will hang forever as shown below:
FS-Cache: Potential volume collision new=00000024 old=00000022
......
INFO: task mount:1148 blocked for more than 122 seconds.
Not tainted 6.1.0-rc6+ #1
task:mount state:D stack:0 pid:1148 ppid:1
Call Trace:
<TASK>
__schedule+0x2f6/0xb80
schedule+0x67/0xe0
fscache_wait_on_volume_collision.cold+0x80/0x82
__fscache_acquire_volume+0x40d/0x4e0
erofs_fscache_register_volume+0x51/0xe0 [erofs]
erofs_fscache_register_fs+0x19c/0x240 [erofs]
erofs_fc_fill_super+0x746/0xaf0 [erofs]
vfs_get_super+0x7d/0x100
get_tree_nodev+0x16/0x20
erofs_fc_get_tree+0x20/0x30 [erofs]
vfs_get_tree+0x24/0xb0
path_mount+0x2fa/0xa90
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Considering that wake_up_bit() is more selective, so fix it by using
wait_on_bit() instead of wait_var_event() to wait for the freeing of
relinquished volume. In addition because waitqueue_active() is used in
wake_up_bit() and clear_bit() doesn't imply any memory barrier, use
clear_and_wake_up_bit() to add the missing memory barrier between
cursor->flags and waitqueue_active(). |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow
Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two
reasons for this: first, the parameter value passed is greater than
ocfs2_max_inline_data_with_xattr, second, the start and end parameters of
ocfs2_truncate_inline are "unsigned int".
So, we need to add a sanity check for byte_start and byte_len right before
ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater
than ocfs2_max_inline_data_with_xattr return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
um: net: Do not use drvdata in release
The drvdata is not available in release. Let's just use container_of()
to get the uml_net instance. Otherwise, removing a network device will
result in a crash:
RIP: 0033:net_device_release+0x10/0x6f
RSP: 00000000e20c7c40 EFLAGS: 00010206
RAX: 000000006002e4e7 RBX: 00000000600f1baf RCX: 00000000624074e0
RDX: 0000000062778000 RSI: 0000000060551c80 RDI: 00000000627af028
RBP: 00000000e20c7c50 R08: 00000000603ad594 R09: 00000000e20c7b70
R10: 000000000000135a R11: 00000000603ad422 R12: 0000000000000000
R13: 0000000062c7af00 R14: 0000000062406d60 R15: 00000000627700b6
Kernel panic - not syncing: Segfault with no mm
CPU: 0 UID: 0 PID: 29 Comm: kworker/0:2 Not tainted 6.12.0-rc6-g59b723cd2adb #1
Workqueue: events mc_work_proc
Stack:
627af028 62c7af00 e20c7c80 60276fcd
62778000 603f5820 627af028 00000000
e20c7cb0 603a2bcd 627af000 62770010
Call Trace:
[<60276fcd>] device_release+0x70/0xba
[<603a2bcd>] kobject_put+0xba/0xe7
[<60277265>] put_device+0x19/0x1c
[<60281266>] platform_device_put+0x26/0x29
[<60281e5f>] platform_device_unregister+0x2c/0x2e
[<6002ec9c>] net_remove+0x63/0x69
[<60031316>] ? mconsole_reply+0x0/0x50
[<600310c8>] mconsole_remove+0x160/0x1cc
[<60087d40>] ? __remove_hrtimer+0x38/0x74
[<60087ff8>] ? hrtimer_try_to_cancel+0x8c/0x98
[<6006b3cf>] ? dl_server_stop+0x3f/0x48
[<6006b390>] ? dl_server_stop+0x0/0x48
[<600672e8>] ? dequeue_entities+0x327/0x390
[<60038fa6>] ? um_set_signals+0x0/0x43
[<6003070c>] mc_work_proc+0x77/0x91
[<60057664>] process_scheduled_works+0x1b3/0x2dd
[<60055f32>] ? assign_work+0x0/0x58
[<60057f0a>] worker_thread+0x1e9/0x293
[<6005406f>] ? set_pf_worker+0x0/0x64
[<6005d65d>] ? arch_local_irq_save+0x0/0x2d
[<6005d748>] ? kthread_exit+0x0/0x3a
[<60057d21>] ? worker_thread+0x0/0x293
[<6005dbf1>] kthread+0x126/0x12b
[<600219c5>] new_thread_handler+0x85/0xb6 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix panic when forwarding a pkt with no in6 dev
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5% |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Stop active perfmon if it is being destroyed
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed"). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore
The dtl_access_lock needs to be a rw_sempahore, a sleeping lock, because
the code calls kmalloc() while holding it, which can sleep:
# echo 1 > /proc/powerpc/vcpudispatch_stats
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:337
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 199, name: sh
preempt_count: 1, expected: 0
3 locks held by sh/199:
#0: c00000000a0743f8 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x324/0x438
#1: c0000000028c7058 (dtl_enable_mutex){+.+.}-{3:3}, at: vcpudispatch_stats_write+0xd4/0x5f4
#2: c0000000028c70b8 (dtl_access_lock){+.+.}-{2:2}, at: vcpudispatch_stats_write+0x220/0x5f4
CPU: 0 PID: 199 Comm: sh Not tainted 6.10.0-rc4 #152
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
dump_stack_lvl+0x130/0x148 (unreliable)
__might_resched+0x174/0x410
kmem_cache_alloc_noprof+0x340/0x3d0
alloc_dtl_buffers+0x124/0x1ac
vcpudispatch_stats_write+0x2a8/0x5f4
proc_reg_write+0xf4/0x150
vfs_write+0xfc/0x438
ksys_write+0x88/0x148
system_call_exception+0x1c4/0x5a0
system_call_common+0xf4/0x258 |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix XDP program unloading while removing the driver
The commit 6533e558c650 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
cpu0 cpu1
j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)
=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
j1939_session_deactivate_activate_next+0x11/0x28
j1939_xtp_rx_eoma+0x12a/0x180
j1939_tp_recv+0x4a2/0x510
j1939_can_recv+0x226/0x380
can_rcv_filter+0xf8/0x220
can_receive+0x102/0x220
? process_backlog+0xf0/0x2c0
can_rcv+0x53/0xf0
__netif_receive_skb_one_core+0x67/0x90
? process_backlog+0x97/0x2c0
__netif_receive_skb+0x22/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: initialize registers in nft_do_chain()
Initialize registers to avoid stack leak into userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
mpe: On 64-bit Book3E vmalloc space starts at 0x8000000000000000.
Because of the way __pa() works we have:
__pa(0x8000000000000000) == 0, and therefore
virt_to_pfn(0x8000000000000000) == 0, and therefore
virt_addr_valid(0x8000000000000000) == true
Which is wrong, virt_addr_valid() should be false for vmalloc space.
In fact all vmalloc addresses that alias with a valid PFN will return
true from virt_addr_valid(). That can cause bugs with hardened usercopy
as described below by Kefeng Wang:
When running ethtool eth0 on 64-bit Book3E, a BUG occurred:
usercopy: Kernel memory exposure attempt detected from SLUB object not in SLUB page?! (offset 0, size 1048)!
kernel BUG at mm/usercopy.c:99
...
usercopy_abort+0x64/0xa0 (unreliable)
__check_heap_object+0x168/0x190
__check_object_size+0x1a0/0x200
dev_ethtool+0x2494/0x2b20
dev_ioctl+0x5d0/0x770
sock_do_ioctl+0xf0/0x1d0
sock_ioctl+0x3ec/0x5a0
__se_sys_ioctl+0xf0/0x160
system_call_exception+0xfc/0x1f0
system_call_common+0xf8/0x200
The code shows below,
data = vzalloc(array_size(gstrings.len, ETH_GSTRING_LEN));
copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN))
The data is alloced by vmalloc(), virt_addr_valid(ptr) will return true
on 64-bit Book3E, which leads to the panic.
As commit 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va
and __pa addresses") does, make sure the virt addr above PAGE_OFFSET in
the virt_addr_valid() for 64-bit, also add upper limit check to make
sure the virt is below high_memory.
Meanwhile, for 32-bit PAGE_OFFSET is the virtual address of the start
of lowmem, high_memory is the upper low virtual address, the check is
suitable for 32-bit, this will fix the issue mentioned in commit
602946ec2f90 ("powerpc: Set max_mapnr correctly") too.
On 32-bit there is a similar problem with high memory, that was fixed in
commit 602946ec2f90 ("powerpc: Set max_mapnr correctly"), but that
commit breaks highmem and needs to be reverted.
We can't easily fix __pa(), we have code that relies on its current
behaviour. So for now add extra checks to virt_addr_valid().
For 64-bit Book3S the extra checks are not necessary, the combination of
virt_to_pfn() and pfn_valid() should yield the correct result, but they
are harmless.
[mpe: Add additional change log detail] |
