| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt.
nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.
Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.
With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:
[ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[ 1.215719] --- interrupt: 200
[ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8
Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hyperv: streamline driver probe to avoid devres issues
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Set send and receive CQ before forwarding to the driver
Preset both receive and send CQ pointers prior to call to the drivers and
overwrite it later again till the mlx4 is going to be changed do not
overwrite ibqp properties.
This change is needed for mlx5, because in case of QP creation failure, it
will go to the path of QP destroy which relies on proper CQ pointers.
BUG: KASAN: use-after-free in create_qp.cold+0x164/0x16e [mlx5_ib]
Write of size 8 at addr ffff8880064c55c0 by task a.out/246
CPU: 0 PID: 246 Comm: a.out Not tainted 5.15.0+ #291
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
create_qp.cold+0x164/0x16e [mlx5_ib]
mlx5_ib_create_qp+0x358/0x28a0 [mlx5_ib]
create_qp.part.0+0x45b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 246:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0xa4/0xd0
create_qp.part.0+0x92/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 246:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x10c/0x150
slab_free_freelist_hook+0xb4/0x1b0
kfree+0xe7/0x2a0
create_qp.part.0+0x52b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix assumption that Resolution Multipliers must be in Logical Collections
A report in 2019 by the syzbot fuzzer was found to be connected to two
errors in the HID core associated with Resolution Multipliers. One of
the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop
in hid_apply_multiplier."), but the other has not been fixed.
This error arises because hid_apply_multipler() assumes that every
Resolution Multiplier control is contained in a Logical Collection,
i.e., there's no way the routine can ever set multiplier_collection to
NULL. This is in spite of the fact that the function starts with a
big comment saying:
* "The Resolution Multiplier control must be contained in the same
* Logical Collection as the control(s) to which it is to be applied.
...
* If no Logical Collection is
* defined, the Resolution Multiplier is associated with all
* controls in the report."
* HID Usage Table, v1.12, Section 4.3.1, p30
*
* Thus, search from the current collection upwards until we find a
* logical collection...
The comment and the code overlook the possibility that none of the
collections found may be a Logical Collection.
The fix is to set the multiplier_collection pointer to NULL if the
collection found isn't a Logical Collection. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length
No check is done on the size of the data to be transmiited. This causes
a kernel panic when this size exceeds the sg_miter's length.
Limit the number of transmitted bytes to sgm->length. |
| In the Linux kernel, the following vulnerability has been resolved:
net: netdevsim: fix nsim_pp_hold_write()
nsim_pp_hold_write() has two problems:
1) It may return with rtnl held, as found by syzbot.
2) Its return value does not propagate an error if any. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable()
When mtk-cmdq unbinds, a WARN_ON message with condition
pm_runtime_get_sync() < 0 occurs.
According to the call tracei below:
cmdq_mbox_shutdown
mbox_free_channel
mbox_controller_unregister
__devm_mbox_controller_unregister
...
The root cause can be deduced to be calling pm_runtime_get_sync() after
calling pm_runtime_disable() as observed below:
1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe()
to bind the cmdq device to the mbox_controller, so
devm_mbox_controller_unregister() will automatically unregister
the device bound to the mailbox controller when the device-managed
resource is removed. That means devm_mbox_controller_unregister()
and cmdq_mbox_shoutdown() will be called after cmdq_remove().
2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after
devm_mbox_controller_register(), so that devm_pm_runtime_disable()
will be called after cmdq_remove(), but before
devm_mbox_controller_unregister().
To fix this problem, cmdq_probe() needs to move
devm_mbox_controller_register() after devm_pm_runtime_enable() to make
devm_pm_runtime_disable() be called after
devm_mbox_controller_unregister(). |
| In the Linux kernel, the following vulnerability has been resolved:
efi: libstub: only free priv.runtime_map when allocated
priv.runtime_map is only allocated when efi_novamap is not set.
Otherwise, it is an uninitialized value. In the error path, it is freed
unconditionally. Avoid passing an uninitialized value to free_pool.
Free priv.runtime_map only when it was allocated.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs
Base clocks are the first in being probed and are real dependencies of the
rest of fixed, factor and peripheral clocks. For old ralink SoCs RT2880,
RT305x and RT3883 'xtal' must be defined first since in any other case,
when fixed clocks are probed they are delayed until 'xtal' is probed so the
following warning appears:
WARNING: CPU: 0 PID: 0 at drivers/clk/ralink/clk-mtmips.c:499 rt3883_bus_recalc_rate+0x98/0x138
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.43 #0
Stack : 805e58d0 00000000 00000004 8004f950 00000000 00000004 00000000 00000000
80669c54 80830000 80700000 805ae570 80670068 00000001 80669bf8 00000000
00000000 00000000 805ae570 80669b38 00000020 804db7dc 00000000 00000000
203a6d6d 80669b78 80669e48 70617773 00000000 805ae570 00000000 00000009
00000000 00000001 00000004 00000001 00000000 00000000 83fe43b0 00000000
...
Call Trace:
[<800065d0>] show_stack+0x64/0xf4
[<804bca14>] dump_stack_lvl+0x38/0x60
[<800218ac>] __warn+0x94/0xe4
[<8002195c>] warn_slowpath_fmt+0x60/0x94
[<80259ff8>] rt3883_bus_recalc_rate+0x98/0x138
[<80254530>] __clk_register+0x568/0x688
[<80254838>] of_clk_hw_register+0x18/0x2c
[<8070b910>] rt2880_clk_of_clk_init_driver+0x18c/0x594
[<8070b628>] of_clk_init+0x1c0/0x23c
[<806fc448>] plat_time_init+0x58/0x18c
[<806fdaf0>] time_init+0x10/0x6c
[<806f9bc4>] start_kernel+0x458/0x67c
---[ end trace 0000000000000000 ]---
When this driver was mainlined we could not find any active users of old
ralink SoCs so we cannot perform any real tests for them. Now, one user
of a Belkin f9k1109 version 1 device which uses RT3883 SoC appeared and
reported some issues in openWRT:
- https://github.com/openwrt/openwrt/issues/16054
Thus, define a 'rt2880_xtal_recalc_rate()' just returning the expected
frequency 40Mhz and use it along the old ralink SoCs to have a correct
boot trace with no warnings and a working clock plan from the beggining. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix abort all task initialization
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:
[ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[ 197.762656] Call Trace:
[ 197.765127] <IRQ>
[ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[ 197.772364] ? do_raw_spin_unlock+0x54/0x220
[ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[ 197.782406] process_oq+0xe85/0x7890 [pm80xx]
[ 197.786817] ? lock_acquire+0x194/0x490
[ 197.790697] ? handle_irq_event+0x10e/0x1b0
[ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[ 197.800378] ? __wake_up_bit+0x100/0x100
[ 197.804340] ? lock_is_held_type+0x98/0x110
[ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx]
[ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0
[ 197.818785] __do_softirq+0x1b5/0x82d
[ 197.822485] ? do_raw_spin_unlock+0x54/0x220
[ 197.826799] __irq_exit_rcu+0x17e/0x1e0
[ 197.830678] irq_exit_rcu+0xa/0x20
[ 197.834114] common_interrupt+0x78/0x90
[ 197.840051] </IRQ>
[ 197.844236] <TASK>
[ 197.848397] asm_common_interrupt+0x1e/0x40
Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm raid: fix accesses beyond end of raid member array
On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.
In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)
When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.
Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().
The out-of-bounds memory accesses was discovered using KASAN.
This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check pipe offset before setting vblank
pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.
This fixes an OVERRUN issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Use del_timer_sync() before freeing
While looking at a crash report on a timer list being corrupted, which
usually happens when a timer is freed while still active. This is
commonly triggered by code calling del_timer() instead of
del_timer_sync() just before freeing.
One possible culprit is the hci_qca driver, which does exactly that.
Eric mentioned that wake_retrans_timer could be rearmed via the work
queue, so also move the destruction of the work queue before
del_timer_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: qca8k: reset cpu port on MTU change
It was discovered that the Documentation lacks of a fundamental detail
on how to correctly change the MAX_FRAME_SIZE of the switch.
In fact if the MAX_FRAME_SIZE is changed while the cpu port is on, the
switch panics and cease to send any packet. This cause the mgmt ethernet
system to not receive any packet (the slow fallback still works) and
makes the device not reachable. To recover from this a switch reset is
required.
To correctly handle this, turn off the cpu ports before changing the
MAX_FRAME_SIZE and turn on again after the value is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix more uncharged while msg has more_data
In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():
tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc
tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc
The msg->sg.size(11000) has been uncharged twice, to fix we can charge the
remaining msg->sg.size before goto more data.
This issue can cause the following info:
WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
? vfs_write+0x237/0x290
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ionic: no double destroy workqueue
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix handling of received connection abort
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: dw9714: Disable the regulator when the driver fails to probe
When the driver fails to probe, we will get the following splat:
[ 59.305988] ------------[ cut here ]------------
[ 59.306417] WARNING: CPU: 2 PID: 395 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 59.310345] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 59.318362] Call Trace:
[ 59.318582] <TASK>
[ 59.318765] regulator_put+0x1f/0x30
[ 59.319058] devres_release_group+0x319/0x3d0
[ 59.319420] i2c_device_probe+0x766/0x940
Fix this by disabling the regulator in error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: Fix an error check in npcm_video_ece_init()
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV. |
