| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible uaf for 'bfqq->bic'
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Cache streams targeting link when performing LT automation
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate userq input args
This will help on validating the userq input args, and
rejecting for the invalid userq request at the IOCTLs
first place. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate userq buffer virtual address and size
It needs to validate the userq object virtual address to
determine whether it is residented in a valid vm mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix mmap write lock not release
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug. |
| In the Linux kernel, the following vulnerability has been resolved:
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
There is race in amdgpu_amdkfd_device_fini_sw and interrupt.
if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and
kfree(kfd), and KGD interrupt generated.
kernel panic log:
BUG: kernel NULL pointer dereference, address: 0000000000000098
amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP
PGD d78c68067 P4D d78c68067
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
PUD 1465b8067 PMD @
Oops: @002 [#1] SMP NOPTI
kfd kfd: amdgpu: Total number of KFD nodes to be created: 4
CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K
RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40
Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc
89 c6 e8 07 38 5d
RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018
0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098
ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020
0000000000000000 R11: 0000000000000000 R12: 0900000000000002
ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00
CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0
0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu]
? amdgpu_fence_process+0xa4/0x150 [amdgpu]
kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace
amdgpu_irq_dispatch+0x165/0x210 [amdgpu]
amdgpu_ih_process+0x80/0x100 [amdgpu]
amdgpu: Virtual CRAT table created for GPU
amdgpu_irq_handler+0x1f/@x60 [amdgpu]
__handle_irq_event_percpu+0x3d/0x170
amdgpu: Topology: Add dGPU node [0x74a2:0x1002]
handle_irq_event+0x5a/@xcO
handle_edge_irq+0x93/0x240
kfd kfd: amdgpu: KFD node 1 partition @ size 49148M
asm_call_irq_on_stack+0xf/@x20
</IRQ>
common_interrupt+0xb3/0x130
asm_common_interrupt+0x1le/0x40
5.10.134-010.a1i5000.a18.x86_64 #1 |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix improper check of dentry.stream.valid_size
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix possible memory leak in smb2_read()
Memory leak occurs when ksmbd_vfs_read() fails.
Fix this by adding the missing kvfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix possible refcount leak in smb2_sess_setup()
Reference count of ksmbd_session will leak when session need reconnect.
Fix this by adding the missing ksmbd_user_session_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Can't set dst buffer to done when lat decode error
Core thread will call v4l2_m2m_buf_done to set dst buffer done for
lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to
free dst buffer when lat decode error, core thread will access kernel
NULL pointer dereference, then crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix double release compute pasid
If kfd_process_device_init_vm returns failure after vm is converted to
compute vm and vm->pasid set to compute pasid, KFD will not take
pdd->drm_file reference. As a result, drm close file handler maybe
called to release the compute pasid before KFD process destroy worker to
release the same pasid and set vm->pasid to zero, this generates below
WARNING backtrace and NULL pointer access.
Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step
of kfd_process_device_init_vm, to ensure vm pasid is the original pasid
if acquiring vm failed or is the compute pasid with pdd->drm_file
reference taken to avoid double release same pasid.
amdgpu: Failed to create process VM object
ida_free called for id=32770 which is not allocated.
WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140
RIP: 0010:ida_free+0x96/0x140
Call Trace:
amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
drm_file_free.part.13+0x216/0x270 [drm]
drm_close_helper.isra.14+0x60/0x70 [drm]
drm_release+0x6e/0xf0 [drm]
__fput+0xcc/0x280
____fput+0xe/0x20
task_work_run+0x96/0xc0
do_exit+0x3d0/0xc10
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:ida_free+0x76/0x140
Call Trace:
amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu]
amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu]
drm_file_free.part.13+0x216/0x270 [drm]
drm_close_helper.isra.14+0x60/0x70 [drm]
drm_release+0x6e/0xf0 [drm]
__fput+0xcc/0x280
____fput+0xe/0x20
task_work_run+0x96/0xc0
do_exit+0x3d0/0xc10 |
| In the Linux kernel, the following vulnerability has been resolved:
cnic: Fix use-after-free bugs in cnic_delete_task
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:
BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...
Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.
Use get_cpu() instead of smp_processor_id() to avoid this BUG.
[ rjw: Subject edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash when I/O abort times out
While performing CPU hotplug, a crash with the following stack was seen:
Call Trace:
qla24xx_process_response_queue+0x42a/0x970 [qla2xxx]
qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx]
qla_nvme_post_cmd+0x166/0x240 [qla2xxx]
nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc]
blk_mq_dispatch_rq_list+0x17b/0x610
__blk_mq_sched_dispatch_requests+0xb0/0x140
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x35/0x90
__blk_mq_delay_run_hw_queue+0x161/0x180
blk_execute_rq+0xbe/0x160
__nvme_submit_sync_cmd+0x16f/0x220 [nvme_core]
nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics]
nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc]
nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc]
process_one_work+0x1e8/0x3c0
On abort timeout, completion was called without checking if the I/O was
already completed.
Verify that I/O and abort request are indeed outstanding before attempting
completion. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix use-after-free on probe deferral
The bridge counter was never reset when tearing down the DRM device so
that stale pointers to deallocated structures would be accessed on the
next tear down (e.g. after a second late bind deferral).
Given enough bridges and a few probe deferrals this could currently also
lead to data beyond the bridge array being corrupted.
Patchwork: https://patchwork.freedesktop.org/patch/502665/ |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: fix poll request timeout handling
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the
kernel if poll requests timeout triggered, as reported by David. [1]
BUG: kernel NULL pointer dereference, address: 0000000000000008
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:null_timeout_rq+0x4e/0x91
Call Trace:
? null_timeout_rq+0x4e/0x91
blk_mq_handle_expired+0x31/0x4b
bt_iter+0x68/0x84
? bt_tags_iter+0x81/0x81
__sbitmap_for_each_set.constprop.0+0xb0/0xf2
? __blk_mq_complete_request_remote+0xf/0xf
bt_for_each+0x46/0x64
? __blk_mq_complete_request_remote+0xf/0xf
? percpu_ref_get_many+0xc/0x2a
blk_mq_queue_tag_busy_iter+0x14d/0x18e
blk_mq_timeout_work+0x95/0x127
process_one_work+0x185/0x263
worker_thread+0x1b5/0x227
This is indeed a race problem between null_timeout_rq() and null_poll().
null_poll() null_timeout_rq()
spin_lock(&nq->poll_lock)
list_splice_init(&nq->poll_list, &list)
spin_unlock(&nq->poll_lock)
while (!list_empty(&list))
req = list_first_entry()
list_del_init()
...
blk_mq_add_to_batch()
// req->rq_next = NULL
spin_lock(&nq->poll_lock)
// rq->queuelist->next == NULL
list_del_init(&rq->queuelist)
spin_unlock(&nq->poll_lock)
Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.
Note this patch just fix the kernel panic when request timeout happen.
[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/ |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix slot write race condition
Parallel concurrent writes to the same zram index result in leaked
zsmalloc handles. Schematically we can have something like this:
CPU0 CPU1
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
compress compress
handle = zs_malloc() handle = zs_malloc()
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done
too early. In fact, we need to reset zram entry right before we set its
new handle, all under the same slot lock scope. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-stripe: fix a possible integer overflow
There's a possible integer overflow in stripe_io_hints if we have too
large chunk size. Test if the overflow happened, and if it did, don't set
limits->io_min and limits->io_opt; |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm-lpass-dais: Fix NULL pointer dereference if source graph failed
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0 |
| In the Linux kernel, the following vulnerability has been resolved:
drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ
If the interrupt occurs before resource initialization is complete, the
interrupt handler/worker may access uninitialized data such as the I2C
tcpc_client device, potentially leading to NULL pointer dereference. |
