| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: hfi: add a check to handle OOB in sfr region
sfr->buf_size is in shared memory and can be modified by malicious user.
OOB write is possible when the size is made higher than actual sfr data
buffer. Cap the size to allocated size for such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix workqueue crash in cma_netevent_work_handler
struct rdma_cm_id has member "struct work_struct net_work"
that is reused for enqueuing cma_netevent_work_handler()s
onto cma_wq.
Below crash[1] can occur if more than one call to
cma_netevent_callback() occurs in quick succession,
which further enqueues cma_netevent_work_handler()s for the
same rdma_cm_id, overwriting any previously queued work-item(s)
that was just scheduled to run i.e. there is no guarantee
the queued work item may run between two successive calls
to cma_netevent_callback() and the 2nd INIT_WORK would overwrite
the 1st work item (for the same rdma_cm_id), despite grabbing
id_table_lock during enqueue.
Also drgn analysis [2] indicates the work item was likely overwritten.
Fix this by moving the INIT_WORK() to __rdma_create_id(),
so that it doesn't race with any existing queue_work() or
its worker thread.
[1] Trimmed crash stack:
=============================================
BUG: kernel NULL pointer dereference, address: 0000000000000008
kworker/u256:6 ... 6.12.0-0...
Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm)
RIP: 0010:process_one_work+0xba/0x31a
Call Trace:
worker_thread+0x266/0x3a0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
=============================================
[2] drgn crash analysis:
>>> trace = prog.crashed_thread().stack_trace()
>>> trace
(0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15)
(1) __crash_kexec (kernel/crash_core.c:122:4)
(2) panic (kernel/panic.c:399:3)
(3) oops_end (arch/x86/kernel/dumpstack.c:382:3)
...
(8) process_one_work (kernel/workqueue.c:3168:2)
(9) process_scheduled_works (kernel/workqueue.c:3310:3)
(10) worker_thread (kernel/workqueue.c:3391:4)
(11) kthread (kernel/kthread.c:389:9)
Line workqueue.c:3168 for this kernel version is in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
>>> trace[8]["work"]
*(struct work_struct *)0xffff92577d0a21d8 = {
.data = (atomic_long_t){
.counter = (s64)536870912, <=== Note
},
.entry = (struct list_head){
.next = (struct list_head *)0xffff924d075924c0,
.prev = (struct list_head *)0xffff924d075924c0,
},
.func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280,
}
Suspicion is that pwq is NULL:
>>> trace[8]["pwq"]
(struct pool_workqueue *)<absent>
In process_one_work(), pwq is assigned from:
struct pool_workqueue *pwq = get_work_pwq(work);
and get_work_pwq() is:
static struct pool_workqueue *get_work_pwq(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
if (data & WORK_STRUCT_PWQ)
return work_struct_pwq(data);
else
return NULL;
}
WORK_STRUCT_PWQ is 0x4:
>>> print(repr(prog['WORK_STRUCT_PWQ']))
Object(prog, 'enum work_flags', value=4)
But work->data is 536870912 which is 0x20000000.
So, get_work_pwq() returns NULL and we crash in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
============================================= |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: add filesystem context source name check
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added. |
| Squid before 4.9, when certain web browsers are used, mishandles HTML in the host (aka hostname) parameter to cachemgr.cgi. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm/smu11: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| An issue was discovered in GNOME GLib before 2.78.5, and 2.79.x and 2.80.x before 2.80.1. When a GDBus-based client subscribes to signals from a trusted system service such as NetworkManager on a shared computer, other users of the same computer can send spoofed D-Bus signals that the GDBus-based client will wrongly interpret as having been sent by the trusted system service. This could lead to the GDBus-based client behaving incorrectly, with an application-dependent impact. |
| The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust. |
| Faulty input validation in the core of Apache allows malicious or exploitable backend/content generators to split HTTP responses.
This issue affects Apache HTTP Server: through 2.4.58. |
| A NULL pointer dereference in the component /libsrc/dcrleccd.cc of DCMTK v3.6.9+ DEV allows attackers to cause a Denial of Service (DoS) via a crafted DICOM file. |
| DCMTK v3.6.9+ DEV was discovered to contain a buffer overflow via the component /dcmimgle/diinpxt.h. |
| A buffer overflow in DCMTK git master v3.6.9+ DEV allows attackers to cause a Denial of Service (DoS) via a crafted DCM file. |
| The fix for XSA-423 added logic to Linux'es netback driver to deal with
a frontend splitting a packet in a way such that not all of the headers
would come in one piece. Unfortunately the logic introduced there
didn't account for the extreme case of the entire packet being split
into as many pieces as permitted by the protocol, yet still being
smaller than the area that's specially dealt with to keep all (possible)
headers together. Such an unusual packet would therefore trigger a
buffer overrun in the driver. |
| HTTP/2 CONTINUATION DoS attack can cause Apache Traffic Server to consume more resources on the server. Version from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.3 are affected.
Users can set a new setting (proxy.config.http2.max_continuation_frames_per_minute) to limit the number of CONTINUATION frames per minute. ATS does have a fixed amount of memory a request can use and ATS adheres to these limits in previous releases.
Users are recommended to upgrade to versions 8.1.10 or 9.2.4 which fixes the issue. |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. |
| Splinefont in FontForge through 20230101 allows command injection via crafted archives or compressed files. |
