| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix a debugfs null pointer error
[WHY & HOW]
Check whether get_subvp_en() callback exists before calling it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: add a force flush to delay work when radeon
Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs:
Unable to handle kernel paging request at virtual address 00008800e0008010
CPU 0 kworker/0:3(131): Oops 0
pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W
pc is at si_gpu_check_soft_reset+0x3c/0x240
ra is at si_dma_is_lockup+0x34/0xd0
v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000
t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258
t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000
s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018
s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000
s6 = fff00007ef07bd98
a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008
a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338
t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800
t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000
gp = ffffffff81d89690 sp = 00000000aa814126
Disabling lock debugging due to kernel taint
Trace:
[<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0
[<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290
[<ffffffff80977010>] process_one_work+0x280/0x550
[<ffffffff80977350>] worker_thread+0x70/0x7c0
[<ffffffff80977410>] worker_thread+0x130/0x7c0
[<ffffffff80982040>] kthread+0x200/0x210
[<ffffffff809772e0>] worker_thread+0x0/0x7c0
[<ffffffff80981f8c>] kthread+0x14c/0x210
[<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20
[<ffffffff80981e40>] kthread+0x0/0x210
Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101
<88210000> 4821ed21
So force lockup work queue flush to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921e: fix crash in chip reset fail
In case of drv own fail in reset, we may need to run mac_reset several
times. The sequence would trigger system crash as the log below.
Because we do not re-enable/schedule "tx_napi" before disable it again,
the process would keep waiting for state change in napi_diable(). To
avoid the problem and keep status synchronize for each run, goto final
resource handling if drv own failed.
[ 5857.353423] mt7921e 0000:3b:00.0: driver own failed
[ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own
[ 5859.633430] mt7921e 0000:3b:00.0: driver own failed
[ 5859.633444] ------------[ cut here ]------------
[ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d
[ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common]
[ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150
[ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202
......
[ 5859.633766] Call Trace:
[ 5859.633768] <TASK>
[ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e]
[ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common]
[ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common]
[ 5859.633794] ? __kasan_check_read+0x11/0x20
[ 5859.633802] process_one_work+0x7ee/0x1320
[ 5859.633810] worker_thread+0x53c/0x1240
[ 5859.633818] kthread+0x2b8/0x370
[ 5859.633824] ? process_one_work+0x1320/0x1320
[ 5859.633828] ? kthread_complete_and_exit+0x30/0x30
[ 5859.633834] ret_from_fork+0x1f/0x30
[ 5859.633842] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix kernel warning when sending SYN message
When sending a SYN message, this kernel stack trace is observed:
...
[ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550
...
[ 13.398494] Call Trace:
[ 13.398630] <TASK>
[ 13.398630] ? __alloc_skb+0xed/0x1a0
[ 13.398630] tipc_msg_build+0x12c/0x670 [tipc]
[ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290
[ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc]
[ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc]
[ 13.398630] ? __local_bh_enable_ip+0x37/0x80
[ 13.398630] tipc_connect+0x1d9/0x230 [tipc]
[ 13.398630] ? __sys_connect+0x9f/0xd0
[ 13.398630] __sys_connect+0x9f/0xd0
[ 13.398630] ? preempt_count_add+0x4d/0xa0
[ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50
[ 13.398630] __x64_sys_connect+0x16/0x20
[ 13.398630] do_syscall_64+0x42/0x90
[ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd
It is because commit a41dad905e5a ("iov_iter: saner checks for attempt
to copy to/from iterator") has introduced sanity check for copying
from/to iov iterator. Lacking of copy direction from the iterator
viewpoint would lead to kernel stack trace like above.
This commit fixes this issue by initializing the iov iterator with
the correct copy direction when sending SYN or ACK without data. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Fix kernel pointer leak
Pointers should be printed with %p or %px rather than cast to 'unsigned
long long' and printed with %llx. Change %llx to %p to print the secured
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix lock ordering in btrfs_zone_activate()
The btrfs CI reported a lockdep warning as follows by running generic
generic/129.
WARNING: possible circular locking dependency detected
6.7.0-rc5+ #1 Not tainted
------------------------------------------------------
kworker/u5:5/793427 is trying to acquire lock:
ffff88813256d028 (&cache->lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x5e/0x130
but task is already holding lock:
ffff88810a23a318 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x34/0x130
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}:
...
-> #0 (&cache->lock){+.+.}-{2:2}:
...
This is because we take fs_info->zone_active_bgs_lock after a block_group's
lock in btrfs_zone_activate() while doing the opposite in other places.
Fix the issue by expanding the fs_info->zone_active_bgs_lock's critical
section and taking it before a block_group's lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: rgb: Fix missing clk_put() in the error handling paths of tegra_dc_rgb_probe()
If clk_get_sys(..., "pll_d2_out0") fails, the clk_get_sys() call must be
undone.
Add the missing clk_put and a new 'put_pll_d_out0' label in the error
handling path, and use it. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where a user can set the logging location to an arbitrary file. If this file exists, logs are appended to the file. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability in shared memory APIs, where a user can cause an improper memory access issue by a network API. A successful exploit of this vulnerability might lead to denial of service and data tampering. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability in the tracing API, where a user can corrupt system files. A successful exploit of this vulnerability might lead to denial of service and data tampering. |
| NVIDIA CUDA Toolkit for Windows and Linux contains a vulnerability in the nvdisam command line tool, where a user can cause a NULL pointer dereference by running nvdisasm on a malformed ELF file. A successful exploit of this vulnerability might lead to a limited denial of service. |
| NVIDIA CUDA toolkit for Windows and Linux contains a vulnerability in the nvdisasm command line tool where an attacker may cause an improper validation in input issue by tricking the user into running nvdisasm on a malicious ELF file. A successful exploit of this vulnerability may lead to denial of service. |
| NVIDIA CUDA Toolkit for Windows and Linux contains a vulnerability in the nvdisam command line tool, where a user can cause nvdisasm to read freed memory by running it on a malformed ELF file. A successful exploit of this vulnerability might lead to a limited denial of service. |
|
NVIDIA CUDA toolkit for all platforms contains a vulnerability in cuobjdump and nvdisasm where an attacker may cause a crash by tricking a user into reading a malformed ELF file. A successful exploit of this vulnerability may lead to a partial denial of service.
|
|
NVIDIA CUDA toolkit for all platforms contains a vulnerability in cuobjdump and nvdisasm where an attacker may cause a crash by tricking a user into reading a malformed ELF file. A successful exploit of this vulnerability may lead to a partial denial of service.
|
| NVIDIA CUDA toolkit for Linux and Windows contains a vulnerability in the cuobjdump binary, where a user could cause a crash by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. |
| NVIDIA CUDA toolkit for Linux and Windows contains a vulnerability in the cuobjdump binary, where a user could cause a crash by passing a malformed ELF file to cuobjdump. A successful exploit of this vulnerability might lead to a partial denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
The Linked list element and pointer are not stored in the same memory as
the HDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
The Linked list element and pointer are not stored in the same memory as
the eDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error will occur.
In remote setup we can only use a readl to the memory to assure the full
write has occurred. |
