| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mattermost versions 9.5.x <= 9.5.3, 9.6.x <= 9.6.1 and 8.1.x <= 8.1.12 fail to perform proper authorization checks which allows a member running a playbook in an existing channel to be promoted to a channel admin |
| A vulnerability was identified in D-Link DIR-852 up to 1.00CN B09. Affected by this vulnerability is the function phpcgi_main of the file /getcfg.php of the component Device Configuration Handler. Such manipulation leads to information disclosure. The attack may be performed from remote. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| Horilla is a free and open source Human Resource Management System (HRMS). Unauthenticated users can access uploaded resume files in Horilla 1.3.0 by directly guessing or predicting file URLs. These files are stored in a publicly accessible directory, allowing attackers to retrieve sensitive candidate information without authentication. At time of publication there is no known patch. |
| Improper Access Controlvulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to get device informations via the internet. |
| Vulnerability of unauthorized access in the app lock module
Impact: Successful exploitation of this vulnerability will affect integrity and confidentiality. |
| Vulnerability of unauthorized access in the app lock module
Impact: Successful exploitation of this vulnerability will affect integrity and confidentiality. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_erp: Fix object nesting warning
ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM
(A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can
contain more ACLs (i.e., tc filters), but the number of masks in each
region (i.e., tc chain) is limited.
In order to mitigate the effects of the above limitation, the device
allows filters to share a single mask if their masks only differ in up
to 8 consecutive bits. For example, dst_ip/25 can be represented using
dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the
number of masks being used (and therefore does not support mask
aggregation), but can contain a limited number of filters.
The driver uses the "objagg" library to perform the mask aggregation by
passing it objects that consist of the filter's mask and whether the
filter is to be inserted into the A-TCAM or the C-TCAM since filters in
different TCAMs cannot share a mask.
The set of created objects is dependent on the insertion order of the
filters and is not necessarily optimal. Therefore, the driver will
periodically ask the library to compute a more optimal set ("hints") by
looking at all the existing objects.
When the library asks the driver whether two objects can be aggregated
the driver only compares the provided masks and ignores the A-TCAM /
C-TCAM indication. This is the right thing to do since the goal is to
move as many filters as possible to the A-TCAM. The driver also forbids
two identical masks from being aggregated since this can only happen if
one was intentionally put in the C-TCAM to avoid a conflict in the
A-TCAM.
The above can result in the following set of hints:
H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta
H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta
After getting the hints from the library the driver will start migrating
filters from one region to another while consulting the computed hints
and instructing the device to perform a lookup in both regions during
the transition.
Assuming a filter with mask X is being migrated into the A-TCAM in the
new region, the hints lookup will return H1. Since H2 is the parent of
H1, the library will try to find the object associated with it and
create it if necessary in which case another hints lookup (recursive)
will be performed. This hints lookup for {mask Y, A-TCAM} will either
return H2 or H3 since the driver passes the library an object comparison
function that ignores the A-TCAM / C-TCAM indication.
This can eventually lead to nested objects which are not supported by
the library [1].
Fix by removing the object comparison function from both the driver and
the library as the driver was the only user. That way the lookup will
only return exact matches.
I do not have a reliable reproducer that can reproduce the issue in a
timely manner, but before the fix the issue would reproduce in several
minutes and with the fix it does not reproduce in over an hour.
Note that the current usefulness of the hints is limited because they
include the C-TCAM indication and represent aggregation that cannot
actually happen. This will be addressed in net-next.
[1]
WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0
Modules linked in:
CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42
Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0
[...]
Call Trace:
<TASK>
__objagg_obj_get+0x2bb/0x580
objagg_obj_get+0xe/0x80
mlxsw_sp_acl_erp_mask_get+0xb5/0xf0
mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370 |
| This issue was addressed with improved access restrictions. This issue is fixed in visionOS 2.4, macOS Ventura 13.7.5, tvOS 18.4, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, macOS Sonoma 14.7.5. A malicious app may be able to dismiss the system notification on the Lock Screen that a recording was started. |
| This vulnerability exists in the Syrotech SY-GPON-2010-WADONT router due to improper access control in its FTP service. A remote attacker could exploit this vulnerability by establishing an FTP connection using default credentials, potentially gaining unauthorized access to configuration files, user credentials, or other sensitive information stored on the targeted device. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A security flaw has been discovered in geyang ml-logger up to acf255bade5be6ad88d90735c8367b28cbe3a743. Affected by this issue is the function stream_handler of the file ml_logger/server.py of the component File Handler. Performing manipulation of the argument key results in information disclosure. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| Improper Access Control in SMI handler vulnerability in Phoenix SecureCore™ Technology™ 4 allows SPI flash modification.
This issue affects SecureCore™ Technology™ 4:
* from 4.3.0.0 before 4.3.0.203
*
from
4.3.1.0 before 4.3.1.163
*
from
4.4.0.0 before 4.4.0.217
*
from
4.5.0.0 before 4.5.0.138 |
| NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where an attacker could cause memory corruption by identifying and accessing the shared memory region used by the Python backend. A successful exploit of this vulnerability might lead to denial of service. |
| A flaw was found in the Wildfly Server Role Based Access Control (RBAC) provider. When authorization to control management operations is secured using the Role Based Access Control provider, a user without the required privileges can suspend or resume the server. A user with a Monitor or Auditor role is supposed to have only read access permissions and should not be able to suspend the server.
The vulnerability is caused by the Suspend and Resume handlers not performing authorization checks to validate whether the current user has the required permissions to proceed with the action. |
| Sage DPW before 2024_12_001 is vulnerable to Incorrect Access Control. The implemented role-based access controls are not always enforced on the server side. Low-privileged Sage users with employee role privileges can create external courses for other employees, even though they do not have the option to do so in the user interface. To do this, a valid request to create a course simply needs to be modified, so that the current user ID in the "id" parameter is replaced with the ID of another user. |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| Zoho ManageEngine OpManager, OpManager Plus, OpManager MSP, Network Configuration Manager, NetFlow Analyzer, Firewall Analyzer, and OpUtils before 2022-07-27 through 2022-07-28 (125657, 126002, 126104, and 126118) allow unauthenticated attackers to obtain a user's API key, and then access external APIs. |
| Mattermost Android Mobile Apps versions <=2.21.0 fail to properly configure file providers which allows an attacker with local access to access files via file provider. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to August 2025 Cloud-Hosted Flowise, an authenticated vulnerability in Flowise Cloud allows any user on the free tier to access sensitive environment variables from other tenants via the Custom JavaScript Function node. This includes secrets such as OpenAI API keys, AWS credentials, Supabase tokens, and Google Cloud secrets — resulting in a full cross-tenant data exposure. This issue has been patched in the August 2025 Cloud-Hosted Flowise. |
| Vite, a provider of frontend development tooling, has a vulnerability in versions prior to 6.2.3, 6.1.2, 6.0.12, 5.4.15, and 4.5.10. `@fs` denies access to files outside of Vite serving allow list. Adding `?raw??` or `?import&raw??` to the URL bypasses this limitation and returns the file content if it exists. This bypass exists because trailing separators such as `?` are removed in several places, but are not accounted for in query string regexes. The contents of arbitrary files can be returned to the browser. Only apps explicitly exposing the Vite dev server to the network (using `--host` or `server.host` config option) are affected. Versions 6.2.3, 6.1.2, 6.0.12, 5.4.15, and 4.5.10 fix the issue. |
