| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in foreman_kubevirt. When configuring the connection to OpenShift, the system disables SSL verification if a Certificate Authority (CA) certificate is not explicitly set. This insecure default allows a remote attacker, capable of intercepting network traffic between Satellite and OpenShift, to perform a Man-in-the-Middle (MITM) attack. Such an attack could lead to the disclosure or alteration of sensitive information. |
| A flaw was found in fog-kubevirt. This vulnerability allows a remote attacker to perform a Man-in-the-Middle (MITM) attack due to disabled certificate validation. This enables the attacker to intercept and potentially alter sensitive communications between Satellite and OpenShift, resulting in information disclosure and data integrity compromise. |
| A vulnerability exists in the IEC 61850 in MicroSCADA X SYS600 product. The certificate validation of the TLS protocol allows remote Man-in-the-Middle attack due to missing proper validation. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u471, 8u471-b50, 8u471-perf, 11.0.29, 17.0.17, 21.0.9, 25.0.1; Oracle GraalVM for JDK: 17.0.17 and 21.0.9; Oracle GraalVM Enterprise Edition: 21.3.16. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| An improper certificate validation vulnerability exists in ToDesktop Builder v0.32.1 This vulnerability allows an unauthenticated, on-path attacker to spoof backend responses by exploiting insufficient certificate validation. |
| Validating certificate chains which contain DSA public keys can cause programs to panic, due to a interface cast that assumes they implement the Equal method. This affects programs which validate arbitrary certificate chains. |
| When the user set the Notification's sender to send emails to the SMTP server via msmtp, an improper validated TLS/SSL certificates allows an attacker who can intercept network traffic between the SMTP client and server to execute a man-in-the-middle (MITM) attack, which may obtain the sensitive information of the SMTP.
Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RKD2 as well as from ADM 5.0.0 through ADM 5.1.0.RN42. |
| dcap-qvl implements the quote verification logic for DCAP (Data Center Attestation Primitives). A vulnerability present in versions prior to 0.3.9 involves a critical gap in the cryptographic verification process within the dcap-qvl. The library fetches QE Identity collateral (including qe_identity, qe_identity_signature, and qe_identity_issuer_chain) from the PCCS. However, it skips to verify the QE Identity signature against its certificate chain and does not enforce policy constraints on the QE Report. An attacker can forge the QE Identity data to whitelist a malicious or non-Intel Quoting Enclave. This allows the attacker to forge the QE and sign untrusted quotes that the verifier will accept as valid. Effectively, this bypasses the entire remote attestation security model, as the verifier can no longer trust the entity responsible for signing the quotes. All deployments utilizing the dcap-qvl library for SGX or TDX quote verification are affected. The vulnerability has been patched in dcap-qvl version 0.3.9. The fix implements the missing cryptographic verification for the QE Identity signature and enforces the required checks for MRSIGNER, ISVPRODID, and ISVSVN against the QE Report. Users of the `@phala/dcap-qvl-node` and `@phala/dcap-qvl-web` packages should switch to the pure JavaScript implementation, `@phala/dcap-qvl`. There are no known workarounds for this vulnerability. Users must upgrade to the patched version to ensure that QE Identity collateral is properly verified. |
| wlc is a Weblate command-line client using Weblate's REST API. Prior to 1.17.0, the SSL verification would be skipped for some crafted URLs. This vulnerability is fixed in 1.17.0. |
| An Improper Certificate Validation vulnerability in the OPC-UA client and ANSL over TLS client used in Automation Studio versions before 6.5 could allow an unauthenticated attacker on the network to position themselves to intercept and interfere with data exchanges. |
| The Infotainment ECU manufactured by Bosch which is installed in Nissan Leaf ZE1 – 2020 uses a Redbend service for over-the-air provisioning and updates. HTTPS is used for communication with the back-end server. Due to usage of the default configuration for the underlying SSL engine, the server root certificate is not verified. As a result, an attacker may be able to impersonate a Redbend backend server using a self-signed certificate.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| When using `CURLOPT_PINNEDPUBLICKEY` option with libcurl or `--pinnedpubkey`
with the curl tool,curl should check the public key of the server certificate
to verify the peer.
This check was skipped in a certain condition that would then make curl allow
the connection without performing the proper check, thus not noticing a
possible impostor. To skip this check, the connection had to be done with QUIC
with ngtcp2 built to use GnuTLS and the user had to explicitly disable the
standard certificate verification. |
| The Socket Appender in Apache Log4j Core versions 2.0-beta9 through 2.25.2 does not perform TLS hostname verification of the peer certificate, even when the verifyHostName https://logging.apache.org/log4j/2.x/manual/appenders/network.html#SslConfiguration-attr-verifyHostName configuration attribute or the log4j2.sslVerifyHostName https://logging.apache.org/log4j/2.x/manual/systemproperties.html#log4j2.sslVerifyHostName system property is set to true.
This issue may allow a man-in-the-middle attacker to intercept or redirect log traffic under the following conditions:
* The attacker is able to intercept or redirect network traffic between the client and the log receiver.
* The attacker can present a server certificate issued by a certification authority trusted by the Socket Appender’s configured trust store (or by the default Java trust store if no custom trust store is configured).
Users are advised to upgrade to Apache Log4j Core version 2.25.3, which addresses this issue.
As an alternative mitigation, the Socket Appender may be configured to use a private or restricted trust root to limit the set of trusted certificates. |
| No description is available for this CVE. |
| Cybersecurity Nozomi Networks Labs, a specialized security company focused on Industrial Control Systems (ICS) and OT/IoT security, has found a flaw that camera's client service does not perform certificate validation. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. |
| An improper certificate validation vulnerability in Fortinet FortiOS 7.4.0 through 7.4.1, FortiOS 7.2.0 through 7.2.6, FortiOS 7.0.0 through 7.0.15, FortiOS 6.4 all versions allows a remote and unauthenticated attacker to perform a Man-in-the-Middle attack on the FortiLink communication channel between the FortiOS device and FortiSwitch. |
| 2N Access Commander version 2.1 and prior is vulnerable in default settings to Man In The Middle attack due to not verifying certificates of 2N edge devices.
2N has currently released an updated version 3.3 of 2N Access Commander, with added Certificate Fingerprint Verification. Since version 2.2 of 2N Access Commander (released in February 2022) it is also possible to enforce TLS certificate validation.It is recommended that all customers update 2N Access Commander to the latest version and use one of two mentioned practices. |
| NeuVector supports login authentication through OpenID Connect. However, the TLS verification (which verifies the remote server's authenticity and integrity) for OpenID Connect is not enforced by default. As a result this may expose the system to man-in-the-middle (MITM) attacks. |
| LINE client for iOS prior to 15.4 allows man-in-the-middle attacks due to improper SSL/TLS certificate validation in an integrated financial SDK. The SDK interfered with the application's network processing, causing server certificate verification to be disabled for a significant portion of network traffic, which could allow a network-adjacent attacker to intercept or modify encrypted communications. |
| KDE messagelib before 25.11.90 ignores SSL errors for threatMatches:find in the Google Safe Browsing Lookup API (aka phishing API), which might allow spoofing of threat data. NOTE: this Lookup API is not contacted in the messagelib default configuration. |
