| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-tpg: prevent the risk of a division by zero
As reported by Coverity, the logic at tpg_precalculate_line()
blindly rescales the buffer even when scaled_witdh is equal to
zero. If this ever happens, this will cause a division by zero.
Instead, add a WARN_ON_ONCE() to trigger such cases and return
without doing any precalculation. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: check outstanding simultaneous SMB operations
If Client send simultaneous SMB operations to ksmbd, It exhausts too much
memory through the "ksmbd_work_cache”. It will cause OOM issue.
ksmbd has a credit mechanism but it can't handle this problem. This patch
add the check if it exceeds max credits to prevent this problem by assuming
that one smb request consumes at least one credit. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
When sealing or unsealing a key blob we currently do not wait for
the AEAD cipher operation to finish and simply return after submitting
the request. If there is some load on the system we can exit before
the cipher operation is done and the buffer we read from/write to
is already removed from the stack. This will e.g. result in NULL
pointer dereference errors in the DCP driver during blob creation.
Fix this by waiting for the AEAD cipher operation to finish before
resuming the seal and unseal calls. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix out-of-bounds access to the dirty bitset when resizing
dm-cache checks the dirty bits of the cache blocks to be dropped when
shrinking the fast device, but an index bug in bitset iteration causes
out-of-bounds access.
Reproduce steps:
1. create a cache device of 1024 cache blocks (128 bytes dirty bitset)
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. shrink the fast device to 512 cache blocks, triggering out-of-bounds
access to the dirty bitset (offset 0x80)
dmsetup suspend cache
dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0
Read of size 8 at addr ffffc900000f3080 by task dmsetup/131
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc900000f3000, ffffc900000f5000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by making the index post-incremented. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix potential out-of-bounds access on the first resume
Out-of-bounds access occurs if the fast device is expanded unexpectedly
before the first-time resume of the cache table. This happens because
expanding the fast device requires reloading the cache table for
cache_create to allocate new in-core data structures that fit the new
size, and the check in cache_preresume is not performed during the
first resume, leading to the issue.
Reproduce steps:
1. prepare component devices:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
2. load a cache table of 512 cache blocks, and deliberately expand the
fast device before resuming the cache, making the in-core data
structures inadequate.
dmsetup create cache --notable
dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
3. suspend the cache to write out the in-core dirty bitset and hint
array, leading to out-of-bounds access to the dirty bitset at offset
0x40:
dmsetup suspend cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80
Read of size 8 at addr ffffc90000085040 by task dmsetup/90
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc90000085000, ffffc90000087000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by checking the size change on the first resume. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix a crash if blk_alloc_disk fails
If blk_alloc_disk fails, the variable md->disk is set to an error value.
cleanup_mapped_device will see that md->disk is non-NULL and it will
attempt to access it, causing a crash on this statement
"md->disk->private_data = NULL;". |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: avoid vport access in idpf_get_link_ksettings
When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.
To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reinitialize delayed ref list after deleting it from the list
At insert_delayed_ref() if we need to update the action of an existing
ref to BTRFS_DROP_DELAYED_REF, we delete the ref from its ref head's
ref_add_list using list_del(), which leaves the ref's add_list member
not reinitialized, as list_del() sets the next and prev members of the
list to LIST_POISON1 and LIST_POISON2, respectively.
If later we end up calling drop_delayed_ref() against the ref, which can
happen during merging or when destroying delayed refs due to a transaction
abort, we can trigger a crash since at drop_delayed_ref() we call
list_empty() against the ref's add_list, which returns false since
the list was not reinitialized after the list_del() and as a consequence
we call list_del() again at drop_delayed_ref(). This results in an
invalid list access since the next and prev members are set to poison
pointers, resulting in a splat if CONFIG_LIST_HARDENED and
CONFIG_DEBUG_LIST are set or invalid poison pointer dereferences
otherwise.
So fix this by deleting from the list with list_del_init() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
signal: restore the override_rlimit logic
Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
damon_feed_loop_next_input() is inefficient and fragile to overflows.
Specifically, 'score_goal_diff_bp' calculation can overflow when 'score'
is high. The calculation is actually unnecessary at all because 'goal' is
a constant of value 10,000. Calculation of 'compensation' is again
fragile to overflow. Final calculation of return value for under-achiving
case is again fragile to overflow when the current score is
under-achieving the target.
Add two corner cases handling at the beginning of the function to make the
body easier to read, and rewrite the body of the function to avoid
overflows and the unnecessary bp value calcuation. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: sunxi: Fix accessing an released usb phy
Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd()
The "*cmd" variable can be controlled by the user via debugfs. That means
"new_cam" can be as high as 255 while the size of the uc->updated[] array
is UCSI_MAX_ALTMODES (30).
The call tree is:
ucsi_cmd() // val comes from simple_attr_write_xsigned()
-> ucsi_send_command()
-> ucsi_send_command_common()
-> ucsi_run_command() // calls ucsi->ops->sync_control()
-> ucsi_ccg_sync_control() |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
A recent change in the venus driver results in a stuck clock on the
Lenovo ThinkPad X13s, for example, when streaming video in firefox:
video_cc_mvs0_clk status stuck at 'off'
WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c
...
Call trace:
clk_branch_wait+0x144/0x15c
clk_branch2_enable+0x30/0x40
clk_core_enable+0xd8/0x29c
clk_enable+0x2c/0x4c
vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core]
coreid_power_v4+0x464/0x628 [venus_core]
vdec_start_streaming+0xc4/0x510 [venus_dec]
vb2_start_streaming+0x6c/0x180 [videobuf2_common]
vb2_core_streamon+0x120/0x1dc [videobuf2_common]
vb2_streamon+0x1c/0x6c [videobuf2_v4l2]
v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem]
v4l_streamon+0x24/0x30 [videodev]
using the out-of-tree sm8350/sc8280xp venus support. [1]
Update also the sm8350/sc8280xp GDSC definitions so that the hw control
mode can be changed at runtime as the venus driver now requires. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove():
[ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12
[ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry
[ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004
[...]
[ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[...]
[ 57.331328] Call Trace:
[ 57.331477] <TASK>
[...]
[ 57.333511] ? do_user_addr_fault+0x3e5/0x740
[ 57.333778] ? exc_page_fault+0x70/0x170
[ 57.334016] ? asm_exc_page_fault+0x2b/0x30
[ 57.334263] ? __pfx_ocfs2_xa_block_wipe_namevalue+0x10/0x10
[ 57.334596] ? ocfs2_xa_block_wipe_namevalue+0x2a/0xc0
[ 57.334913] ocfs2_xa_remove_entry+0x23/0xc0
[ 57.335164] ocfs2_xa_set+0x704/0xcf0
[ 57.335381] ? _raw_spin_unlock+0x1a/0x40
[ 57.335620] ? ocfs2_inode_cache_unlock+0x16/0x20
[ 57.335915] ? trace_preempt_on+0x1e/0x70
[ 57.336153] ? start_this_handle+0x16c/0x500
[ 57.336410] ? preempt_count_sub+0x50/0x80
[ 57.336656] ? _raw_read_unlock+0x20/0x40
[ 57.336906] ? start_this_handle+0x16c/0x500
[ 57.337162] ocfs2_xattr_block_set+0xa6/0x1e0
[ 57.337424] __ocfs2_xattr_set_handle+0x1fd/0x5d0
[ 57.337706] ? ocfs2_start_trans+0x13d/0x290
[ 57.337971] ocfs2_xattr_set+0xb13/0xfb0
[ 57.338207] ? dput+0x46/0x1c0
[ 57.338393] ocfs2_xattr_trusted_set+0x28/0x30
[ 57.338665] ? ocfs2_xattr_trusted_set+0x28/0x30
[ 57.338948] __vfs_removexattr+0x92/0xc0
[ 57.339182] __vfs_removexattr_locked+0xd5/0x190
[ 57.339456] ? preempt_count_sub+0x50/0x80
[ 57.339705] vfs_removexattr+0x5f/0x100
[...]
Reproducer uses faultinject facility to fail ocfs2_xa_remove() ->
ocfs2_xa_value_truncate() with -ENOMEM.
In this case the comment mentions that we can return 0 if
ocfs2_xa_cleanup_value_truncate() is going to wipe the entry
anyway. But the following 'rc' check is wrong and execution flow do
'ocfs2_xa_remove_entry(loc);' twice:
* 1st: in ocfs2_xa_cleanup_value_truncate();
* 2nd: returning back to ocfs2_xa_remove() instead of going to 'out'.
Fix this by skipping the 2nd removal of the same entry and making
syzkaller repro happy. |
| In the Linux kernel, the following vulnerability has been resolved:
sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
The following race condition could trigger a NULL pointer dereference:
sock_map_link_detach(): sock_map_link_update_prog():
mutex_lock(&sockmap_mutex);
...
sockmap_link->map = NULL;
mutex_unlock(&sockmap_mutex);
mutex_lock(&sockmap_mutex);
...
sock_map_prog_link_lookup(sockmap_link->map);
mutex_unlock(&sockmap_mutex);
<continue>
Fix it by adding a NULL pointer check. In this specific case, it makes
no sense to update a link which is being released. |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: Add trailing zero to terminate the string in nsim_nexthop_bucket_activity_write()
This was found by a static analyzer.
We should not forget the trailing zero after copy_from_user()
if we will further do some string operations, sscanf() in this
case. Adding a trailing zero will ensure that the function
performs properly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()
bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the
bits are dynamically allocated. However, the check is incorrect and may
cause a kmemleak as shown below:
unreferenced object 0xffff88812628c8c0 (size 32):
comm "swapper/0", pid 1, jiffies 4294727320
hex dump (first 32 bytes):
b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U...........
f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 ..............
backtrace (crc 781e32cc):
[<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80
[<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0
[<00000000597124d6>] __alloc.isra.0+0x89/0xb0
[<000000004ebfffcd>] alloc_bulk+0x2af/0x720
[<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0
[<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610
[<000000008b616eac>] bpf_global_ma_init+0x19/0x30
[<00000000fc473efc>] do_one_initcall+0xd3/0x3c0
[<00000000ec81498c>] kernel_init_freeable+0x66a/0x940
[<00000000b119f72f>] kernel_init+0x20/0x160
[<00000000f11ac9a7>] ret_from_fork+0x3c/0x70
[<0000000004671da4>] ret_from_fork_asm+0x1a/0x30
That is because nr_bits will be set as zero in bpf_iter_bits_next()
after all bits have been iterated.
Fix the issue by setting kit->bit to kit->nr_bits instead of setting
kit->nr_bits to zero when the iteration completes in
bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to
check whether the iteration is complete and still use "nr_bits > 64" to
indicate whether bits are dynamically allocated. The "!nr_bits" check is
necessary because bpf_iter_bits_new() may fail before setting
kit->nr_bits, and this condition will stop the iteration early instead
of accessing the zeroed or freed kit->bits.
Considering the initial value of kit->bits is -1 and the type of
kit->nr_bits is unsigned int, change the type of kit->nr_bits to int.
The potential overflow problem will be handled in the following patch. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the validity of nr_words in bpf_iter_bits_new()
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
fsdax: dax_unshare_iter needs to copy entire blocks
The code that copies data from srcmap to iomap in dax_unshare_iter is
very very broken, which bfoster's recent fsx changes have exposed.
If the pos and len passed to dax_file_unshare are not aligned to an
fsblock boundary, the iter pos and length in the _iter function will
reflect this unalignment.
dax_iomap_direct_access always returns a pointer to the start of the
kmapped fsdax page, even if its pos argument is in the middle of that
page. This is catastrophic for data integrity when iter->pos is not
aligned to a page, because daddr/saddr do not point to the same byte in
the file as iter->pos. Hence we corrupt user data by copying it to the
wrong place.
If iter->pos + iomap_length() in the _iter function not aligned to a
page, then we fail to copy a full block, and only partially populate the
destination block. This is catastrophic for data confidentiality
because we expose stale pmem contents.
Fix both of these issues by aligning copy_pos/copy_len to a page
boundary (remember, this is fsdax so 1 fsblock == 1 base page) so that
we always copy full blocks.
We're not done yet -- there's no call to invalidate_inode_pages2_range,
so programs that have the file range mmap'd will continue accessing the
old memory mapping after the file metadata updates have completed.
Be careful with the return value -- if the unshare succeeds, we still
need to return the number of bytes that the iomap iter thinks we're
operating on. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Make rmw_lock a raw_spin_lock
The following BUG was triggered:
=============================
[ BUG: Invalid wait context ]
6.12.0-rc2-XXX #406 Not tainted
-----------------------------
kworker/1:1/62 is trying to lock:
ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370
other info that might help us debug this:
context-{5:5}
2 locks held by kworker/1:1/62:
#0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50
#1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280
stack backtrace:
CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406
Workqueue: 0x0 (events)
Call trace:
dump_backtrace+0xa4/0x130
show_stack+0x20/0x38
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x28
__lock_acquire+0x480/0x1ad8
lock_acquire+0x114/0x310
_raw_spin_lock+0x50/0x70
cpc_write+0xcc/0x370
cppc_set_perf+0xa0/0x3a8
cppc_cpufreq_fast_switch+0x40/0xc0
cpufreq_driver_fast_switch+0x4c/0x218
sugov_update_shared+0x234/0x280
update_load_avg+0x6ec/0x7b8
dequeue_entities+0x108/0x830
dequeue_task_fair+0x58/0x408
__schedule+0x4f0/0x1070
schedule+0x54/0x130
worker_thread+0xc0/0x2e8
kthread+0x130/0x148
ret_from_fork+0x10/0x20
sugov_update_shared() locks a raw_spinlock while cpc_write() locks a
spinlock.
To have a correct wait-type order, update rmw_lock to a raw spinlock and
ensure that interrupts will be disabled on the CPU holding it.
[ rjw: Changelog edits ] |
