| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: Flush the notify_hotplug_work
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: atm: cxacru: fix a flaw in existing endpoint checks
Syzbot once again identified a flaw in usb endpoint checking, see [1].
This time the issue stems from a commit authored by me (2eabb655a968
("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")).
While using usb_find_common_endpoints() may usually be enough to
discard devices with wrong endpoints, in this case one needs more
than just finding and identifying the sufficient number of endpoints
of correct types - one needs to check the endpoint's address as well.
Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind,
switch the endpoint verification approach to usb_check_XXX_endpoints()
instead to fix incomplete ep testing.
[1] Syzbot report:
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649
cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline]
cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223
usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058
cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377
usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396
really_probe+0x2b9/0xad0 drivers/base/dd.c:658
__driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800
driver_probe_device+0x50/0x430 drivers/base/dd.c:830
... |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: messaging: Free transaction ID in delayed interrupt scenario
In case of interrupt delay for any reason, slim_do_transfer()
returns timeout error but the transaction ID (TID) is not freed.
This results into invalid memory access inside
qcom_slim_ngd_rx_msgq_cb() due to invalid TID.
Fix the issue by freeing the TID in slim_do_transfer() before
returning timeout error to avoid invalid memory access.
Call trace:
__memcpy_fromio+0x20/0x190
qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl]
vchan_complete+0x2a0/0x4a0
tasklet_action_common+0x274/0x700
tasklet_action+0x28/0x3c
_stext+0x188/0x620
run_ksoftirqd+0x34/0x74
smpboot_thread_fn+0x1d8/0x464
kthread+0x178/0x238
ret_from_fork+0x10/0x20
Code: aa0003e8 91000429 f100044a 3940002b (3800150b)
---[ end trace 0fe00bec2b975c99 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject cooked mode if it is set along with other flags
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: limit printed string from FW file
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have. |
| In the Linux kernel, the following vulnerability has been resolved:
caif_virtio: fix wrong pointer check in cfv_probe()
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked
for NULL before calling it, not cfv->vdev. Also the current implementation
is redundant because the pointer cfv->vdev is dereferenced before it is
checked for NULL.
Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before
calling del_vqs(). |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: ensure network headers are in skb linear part
syzbot found that ipvlan_process_v6_outbound() was assuming
the IPv6 network header isis present in skb->head [1]
Add the needed pskb_network_may_pull() calls for both
IPv4 and IPv6 handlers.
[1]
BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
__ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
ipv6_addr_type include/net/ipv6.h:555 [inline]
ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline]
ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651
ip6_route_output include/net/ip6_route.h:93 [inline]
ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476
ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline]
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline]
ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671
ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223
__netdev_start_xmit include/linux/netdevice.h:5150 [inline]
netdev_start_xmit include/linux/netdevice.h:5159 [inline]
xmit_one net/core/dev.c:3735 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751
sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343
qdisc_restart net/sched/sch_generic.c:408 [inline]
__qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416
qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127
net_tx_action+0x78b/0x940 net/core/dev.c:5484
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
do_softirq+0x9a/0x100 kernel/softirq.c:462
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611
dev_queue_xmit include/linux/netdevice.h:3311 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3132 [inline]
packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164
sock_sendmsg_nosec net/socket.c:718 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: npcm: disable interrupt enable bit before devm_request_irq
The customer reports that there is a soft lockup issue related to
the i2c driver. After checking, the i2c module was doing a tx transfer
and the bmc machine reboots in the middle of the i2c transaction, the i2c
module keeps the status without being reset.
Due to such an i2c module status, the i2c irq handler keeps getting
triggered since the i2c irq handler is registered in the kernel booting
process after the bmc machine is doing a warm rebooting.
The continuous triggering is stopped by the soft lockup watchdog timer.
Disable the interrupt enable bit in the i2c module before calling
devm_request_irq to fix this issue since the i2c relative status bit
is read-only.
Here is the soft lockup log.
[ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1]
[ 28.183351] Modules linked in:
[ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1
[ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 28.208128] pc : __do_softirq+0xb0/0x368
[ 28.212055] lr : __do_softirq+0x70/0x368
[ 28.215972] sp : ffffff8035ebca00
[ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780
[ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0
[ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b
[ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff
[ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000
[ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2
[ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250
[ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434
[ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198
[ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40
[ 28.290611] Call trace:
[ 28.293052] __do_softirq+0xb0/0x368
[ 28.296625] __irq_exit_rcu+0xe0/0x100
[ 28.300374] irq_exit+0x14/0x20
[ 28.303513] handle_domain_irq+0x68/0x90
[ 28.307440] gic_handle_irq+0x78/0xb0
[ 28.311098] call_on_irq_stack+0x20/0x38
[ 28.315019] do_interrupt_handler+0x54/0x5c
[ 28.319199] el1_interrupt+0x2c/0x4c
[ 28.322777] el1h_64_irq_handler+0x14/0x20
[ 28.326872] el1h_64_irq+0x74/0x78
[ 28.330269] __setup_irq+0x454/0x780
[ 28.333841] request_threaded_irq+0xd0/0x1b4
[ 28.338107] devm_request_threaded_irq+0x84/0x100
[ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0
[ 28.346990] platform_probe+0x6c/0xc4
[ 28.350653] really_probe+0xcc/0x45c
[ 28.354227] __driver_probe_device+0x8c/0x160
[ 28.358578] driver_probe_device+0x44/0xe0
[ 28.362670] __driver_attach+0x124/0x1d0
[ 28.366589] bus_for_each_dev+0x7c/0xe0
[ 28.370426] driver_attach+0x28/0x30
[ 28.373997] bus_add_driver+0x124/0x240
[ 28.377830] driver_register+0x7c/0x124
[ 28.381662] __platform_driver_register+0x2c/0x34
[ 28.386362] npcm_i2c_init+0x3c/0x5c
[ 28.389937] do_one_initcall+0x74/0x230
[ 28.393768] kernel_init_freeable+0x24c/0x2b4
[ 28.398126] kernel_init+0x28/0x130
[ 28.401614] ret_from_fork+0x10/0x20
[ 28.405189] Kernel panic - not syncing: softlockup: hung tasks
[ 28.411011] SMP: stopping secondary CPUs
[ 28.414933] Kernel Offset: disabled
[ 28.418412] CPU features: 0x00000000,00000802
[ 28.427644] Rebooting in 20 seconds.. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
[1] Syzbot report:
usb 5-1: Manufacturer: syz
usb 5-1: SerialNumber: syz
usb 5-1: config 0 descriptor??
gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ...
------------[ cut here ]------------
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Modules linked in:
CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:3827 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_resolve_output net/core/neighbour.c:1514 [inline]
neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494
neigh_output include/net/neighbour.h:539 [inline]
ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819
mld_send_cr net/ipv6/mcast.c:2120 [inline]
mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: always handle address removal under msk socket lock
Syzkaller reported a lockdep splat in the PM control path:
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Modules linked in:
CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline]
RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline]
RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff
RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283
RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408
RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000
R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0
R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00
FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59
mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486
mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline]
mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:733
____sys_sendmsg+0x53a/0x860 net/socket.c:2573
___sys_sendmsg net/socket.c:2627 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2659
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7e9998cde9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9
RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007
RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088
Indeed the PM can try to send a RM_ADDR over a msk without acquiring
first the msk socket lock.
The bugged code-path comes from an early optimization: when there
are no subflows, the PM should (usually) not send RM_ADDR
notifications.
The above statement is incorrect, as without locks another process
could concur
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tee: optee: Fix supplicant wait loop
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
Brad Spengler reported the list_del() corruption splat in
gtp_net_exit_batch_rtnl(). [0]
Commit eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns
dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl()
to destroy devices in each netns as done in geneve and ip tunnels.
However, this could trigger ->dellink() twice for the same device during
->exit_batch_rtnl().
Say we have two netns A & B and gtp device B that resides in netns B but
whose UDP socket is in netns A.
1. cleanup_net() processes netns A and then B.
2. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns A's gn->gtp_dev_list and calls ->dellink().
[ device B is not yet unlinked from netns B
as unregister_netdevice_many() has not been called. ]
3. gtp_net_exit_batch_rtnl() finds the device B while iterating
netns B's for_each_netdev() and calls ->dellink().
gtp_dellink() cleans up the device's hash table, unlinks the dev from
gn->gtp_dev_list, and calls unregister_netdevice_queue().
Basically, calling gtp_dellink() multiple times is fine unless
CONFIG_DEBUG_LIST is enabled.
Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and
delegate the destruction to default_device_exit_batch() as done
in bareudp.
[0]:
list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04)
kernel BUG at lib/list_debug.c:58!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1
Tainted: [T]=RANDSTRUCT
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58
Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60
RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283
RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054
RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000
RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32
R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4
R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08
RBX: kasan shadow of 0x0
RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554
RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58
RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71
RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]
RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ]
R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ]
R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ]
R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object]
FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0
Stack:
0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00
ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005
0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d
Call Trace:
<TASK>
[<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28
[<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28
[<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inl
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: Fix use-after-free in geneve_find_dev().
syzkaller reported a use-after-free in geneve_find_dev() [0]
without repro.
geneve_configure() links struct geneve_dev.next to
net_generic(net, geneve_net_id)->geneve_list.
The net here could differ from dev_net(dev) if IFLA_NET_NS_PID,
IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set.
When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally
calls unregister_netdevice_queue() for each dev in the netns,
and later the dev is freed.
However, its geneve_dev.next is still linked to the backend UDP
socket netns.
Then, use-after-free will occur when another geneve dev is created
in the netns.
Let's call geneve_dellink() instead in geneve_destroy_tunnels().
[0]:
BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline]
BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343
Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441
CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x16c/0x6f0 mm/kasan/report.c:489
kasan_report+0xc0/0x120 mm/kasan/report.c:602
__asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379
geneve_find_dev drivers/net/geneve.c:1295 [inline]
geneve_configure+0x234/0x858 drivers/net/geneve.c:1343
geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634
rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795
__rtnl_newlink net/core/rtnetlink.c:3906 [inline]
rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021
rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911
netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543
rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:713 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x410/0x6f8 net/socket.c:2568
___sys_sendmsg+0x178/0x1d8 net/socket.c:2622
__sys_sendmsg net/socket.c:2654 [inline]
__do_sys_sendmsg net/socket.c:2659 [inline]
__se_sys_sendmsg net/socket.c:2657 [inline]
__arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151
el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762
el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600
Allocated by task 13247:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x30/0x68 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4298 [inline]
__kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304
__kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645
alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470
rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604
rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780
__rtnl_newlink net/core/rtnetlink.c:3906 [inline]
rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021
rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911
netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543
rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938
netlink_unicast_kernel net/netlink/af_n
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
arp: use RCU protection in arp_xmit()
arp_xmit() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
ndisc: extend RCU protection in ndisc_send_skb()
ndisc_send_skb() can be called without RTNL or RCU held.
Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu()
and avoid a potential UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Keep the binding until socket destruction
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free when attempting to join an aborted transaction
When we are trying to join the current transaction and if it's aborted,
we read its 'aborted' field after unlocking fs_info->trans_lock and
without holding any extra reference count on it. This means that a
concurrent task that is aborting the transaction may free the transaction
before we read its 'aborted' field, leading to a use-after-free.
Fix this by reading the 'aborted' field while holding fs_info->trans_lock
since any freeing task must first acquire that lock and set
fs_info->running_transaction to NULL before freeing the transaction.
This was reported by syzbot and Dmitry with the following stack traces
from KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278
Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128
CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_data_space
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278
start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697
flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803
btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317
worker_thread+0x870/0xd30 kernel/workqueue.c:3398
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 5315:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329
kmalloc_noprof include/linux/slab.h:901 [inline]
join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308
start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697
btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572
lookup_open fs/namei.c:3649 [inline]
open_last_lookups fs/namei.c:3748 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3984
do_filp_open+0x27f/0x4e0 fs/namei.c:4014
do_sys_openat2+0x13e/0x1d0 fs/open.c:1402
do_sys_open fs/open.c:1417 [inline]
__do_sys_creat fs/open.c:1495 [inline]
__se_sys_creat fs/open.c:1489 [inline]
__x64_sys_creat+0x123/0x170 fs/open.c:1489
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5336:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2353 [inline]
slab_free mm/slub.c:4613 [inline]
kfree+0x196/0x430 mm/slub.c:4761
cleanup_transaction fs/btrfs/transaction.c:2063 [inline]
btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598
insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757
btrfs_balance+0x992/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
padata: avoid UAF for reorder_work
Although the previous patch can avoid ps and ps UAF for _do_serial, it
can not avoid potential UAF issue for reorder_work. This issue can
happen just as below:
crypto_request crypto_request crypto_del_alg
padata_do_serial
...
padata_reorder
// processes all remaining
// requests then breaks
while (1) {
if (!padata)
break;
...
}
padata_do_serial
// new request added
list_add
// sees the new request
queue_work(reorder_work)
padata_reorder
queue_work_on(squeue->work)
...
<kworker context>
padata_serial_worker
// completes new request,
// no more outstanding
// requests
crypto_del_alg
// free pd
<kworker context>
invoke_padata_reorder
// UAF of pd
To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work'
into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish. |
