| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Versions `<=8.5.1` of `jsonwebtoken` library could be misconfigured so that legacy, insecure key types are used for signature verification. For example, DSA keys could be used with the RS256 algorithm. You are affected if you are using an algorithm and a key type other than a combination listed in the GitHub Security Advisory as unaffected. This issue has been fixed, please update to version 9.0.0. This version validates for asymmetric key type and algorithm combinations. Please refer to the above mentioned algorithm / key type combinations for the valid secure configuration. After updating to version 9.0.0, if you still intend to continue with signing or verifying tokens using invalid key type/algorithm value combinations, you’ll need to set the `allowInvalidAsymmetricKeyTypes` option to `true` in the `sign()` and/or `verify()` functions. |
| A vulnerability, which was classified as problematic, has been found in Click Studios Passwordstate and Passwordstate Browser Extension Chrome. Affected by this issue is some unknown functionality. The manipulation leads to risky cryptographic algorithm. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-216272. |
| GSKit in IBM Tivoli Directory Server (ITDS) 6.0 before 6.0.0.73-ISS-ITDS-IF0073, 6.1 before 6.1.0.66-ISS-ITDS-IF0066, 6.2 before 6.2.0.42-ISS-ITDS-IF0042, and 6.3 before 6.3.0.35-ISS-ITDS-IF0035 and IBM Security Directory Server (ISDS) 6.3.1 before 6.3.1.9-ISS-ISDS-IF0009 does not properly restrict TLS state transitions, which makes it easier for remote attackers to conduct cipher-downgrade attacks to EXPORT_RSA ciphers via crafted TLS traffic, related to the "FREAK" issue, a different vulnerability than CVE-2015-0204. |
| Huawei AR routers with software before V200R007C00SPC100; Quidway S9300 routers with software before V200R009C00; S12700 routers with software before V200R008C00SPC500; S9300, Quidway S5300, and S5300 routers with software before V200R007C00; and S5700 routers with software before V200R007C00SPC500 makes it easier for remote authenticated administrators to obtain encryption keys and ciphertext passwords via vectors related to key storage. |
| The RC4 algorithm, as used in the TLS protocol and SSL protocol, does not properly combine state data with key data during the initialization phase, which makes it easier for remote attackers to conduct plaintext-recovery attacks against the initial bytes of a stream by sniffing network traffic that occasionally relies on keys affected by the Invariance Weakness, and then using a brute-force approach involving LSB values, aka the "Bar Mitzvah" issue. |
| Moxa MGate MB3180 before 1.8, MGate MB3280 before 2.7, MGate MB3480 before 2.6, MGate MB3170 before 2.5, and MGate MB3270 before 2.7 use weak encryption, which allows remote attackers to bypass authentication via a brute-force series of guesses for a parameter value. |
| The kickstart file in Red Hat QuickStart Cloud Installer (QCI) forces use of MD5 passwords on deployed systems, which makes it easier for attackers to determine cleartext passwords via a brute-force attack. |
| GnuTLS before 2.9.10 does not verify the activation and expiration dates of CA certificates, which allows man-in-the-middle attackers to spoof servers via a certificate issued by a CA certificate that is (1) not yet valid or (2) no longer valid. |
| lib/util/miq-password.rb in Red Hat CloudForms 3.0 Management Engine (CFME) before 5.2.4.2 uses a hard-coded salt, which makes it easier for remote attackers to guess passwords via a brute force attack. |
| 389 Directory Server (formerly Fedora Directory Server) before 1.3.3.12 does not enforce the nsSSL3Ciphers preference when creating an sslSocket, which allows remote attackers to have unspecified impact by requesting to use a disabled cipher. |
| SHA-1 is not collision resistant, which makes it easier for context-dependent attackers to conduct spoofing attacks, as demonstrated by attacks on the use of SHA-1 in TLS 1.2. NOTE: this CVE exists to provide a common identifier for referencing this SHA-1 issue; the existence of an identifier is not, by itself, a technology recommendation. |
| Apache Subversion 1.0.0 through 1.7.x before 1.7.17 and 1.8.x before 1.8.10 uses an MD5 hash of the URL and authentication realm to store cached credentials, which makes it easier for remote servers to obtain the credentials via a crafted authentication realm. |
| EMC RSA BSAFE Micro Edition Suite (MES) 4.0.x before 4.0.8 and 4.1.x before 4.1.3 and RSA BSAFE SSL-C 2.8.9 and earlier allow remote SSL servers to conduct ECDHE-to-ECDH downgrade attacks and trigger a loss of forward secrecy by omitting the ServerKeyExchange message, a similar issue to CVE-2014-3572. |
| The SSL profiles component in F5 BIG-IP LTM, APM, and ASM 10.0.0 through 10.2.4 and 11.0.0 through 11.5.1, AAM 11.4.0 through 11.5.1, AFM 11.3.0 through 11.5.1, Analytics 11.0.0 through 11.5.1, Edge Gateway, WebAccelerator, and WOM 10.1.0 through 10.2.4 and 11.0.0 through 11.3.0, PEM 11.3.0 through 11.6.0, and PSM 10.0.0 through 10.2.4 and 11.0.0 through 11.4.1 and BIG-IQ Cloud and Security 4.0.0 through 4.4.0 and Device 4.2.0 through 4.4.0, when using TLS 1.x before TLS 1.2, does not properly check CBC padding bytes when terminating connections, which makes it easier for man-in-the-middle attackers to obtain cleartext data via a padding-oracle attack, a variant of CVE-2014-3566 (aka POODLE). NOTE: the scope of this identifier is limited to the F5 implementation only. Other vulnerable implementations should receive their own CVE ID, since this is not a vulnerability within the design of TLS 1.x itself. |
| The client in EMC RSA BSAFE Micro Edition Suite (MES) 4.0.x before 4.0.9 and 4.1.x before 4.1.5 places the weakest algorithms first in a signature-algorithm list transmitted to a server, which makes it easier for remote attackers to defeat cryptographic protection mechanisms by leveraging server behavior in which the first algorithm is used. |
| libzmq (aka ZeroMQ/C++) 4.0.x before 4.0.5 does not ensure that nonces are unique, which allows man-in-the-middle attackers to conduct replay attacks via unspecified vectors. |
| Huawei AR routers with software before V200R007C00SPC100; Quidway S9300 routers with software before V200R009C00; S12700 routers with software before V200R008C00SPC500; S9300, Quidway S5300, and S5300 routers with software before V200R007C00; and S5700 routers with software before V200R007C00SPC500 make it easier for remote authenticated administrators to obtain and decrypt passwords by leveraging selection of a reversible encryption algorithm. |
| The DES and Triple DES ciphers, as used in the TLS, SSH, and IPSec protocols and other protocols and products, have a birthday bound of approximately four billion blocks, which makes it easier for remote attackers to obtain cleartext data via a birthday attack against a long-duration encrypted session, as demonstrated by an HTTPS session using Triple DES in CBC mode, aka a "Sweet32" attack. |
| An issue was discovered in Open-Xchange Guard before 2.2.0-rev8. The "getprivkeybyid" API call is used to download a PGP Private Key for a specific user after providing authentication credentials. Clients provide the "id" and "cid" parameter to specify the current user by its user- and context-ID. The "auth" parameter contains a hashed password string which gets created by the client by asking the user to enter his or her OX Guard password. This parameter is used as single point of authentication when accessing PGP Private Keys. In case a user has set the same password as another user, it is possible to download another user's PGP Private Key by iterating the "id" and "cid" parameters. This kind of attack would also be able by brute-forcing login credentials, but since the "id" and "cid" parameters are sequential they are much easier to predict than a user's login name. At the same time, there are some obvious insecure standard passwords that are widely used. A attacker could send the hashed representation of typically weak passwords and randomly fetch Private Key of matching accounts. The attack can be executed by both internal users and "guests" which use the external mail reader. |
| authfile.c in sshd in OpenSSH before 7.4 does not properly consider the effects of realloc on buffer contents, which might allow local users to obtain sensitive private-key information by leveraging access to a privilege-separated child process. |
