| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM MQ 9.1, 9.2, 9.3, 9.4 LTS and 9.3, 9.4 CD is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. |
| It was discovered that a nft object or expression could reference a nft set on a different nft table, leading to a use-after-free once that table was deleted. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Don't expose sysfs attributes not applicable for VFs
VFs can't read BMG_PCIE_CAP(0x138340) register nor access PCODE
(already guarded by the info.skip_pcode flag) so we shouldn't
expose attributes that require any of them to avoid errors like:
[] xe 0000:03:00.1: [drm] Tile0: GT0: VF is trying to read an \
inaccessible register 0x138340+0x0
[] RIP: 0010:xe_gt_sriov_vf_read32+0x6c2/0x9a0 [xe]
[] Call Trace:
[] xe_mmio_read32+0x110/0x280 [xe]
[] auto_link_downgrade_capable_show+0x2e/0x70 [xe]
[] dev_attr_show+0x1a/0x70
[] sysfs_kf_seq_show+0xaa/0x120
[] kernfs_seq_show+0x41/0x60
(cherry picked from commit a2d6223d224f333f705ed8495bf8bebfbc585c35) |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knode
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix incorrect boolean values in af_alg_ctx
Commit 1b34cbbf4f01 ("crypto: af_alg - Disallow concurrent writes in
af_alg_sendmsg") changed some fields from bool to 1-bit bitfields of
type u32.
However, some assignments to these fields, specifically 'more' and
'merge', assign values greater than 1. These relied on C's implicit
conversion to bool, such that zero becomes false and nonzero becomes
true.
With a 1-bit bitfields of type u32 instead, mod 2 of the value is taken
instead, resulting in 0 being assigned in some cases when 1 was intended.
Fix this by restoring the bool type. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: dynevent: Add a missing lockdown check on dynevent
Since dynamic_events interface on tracefs is compatible with
kprobe_events and uprobe_events, it should also check the lockdown
status and reject if it is set. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: fix shift-out-of-bounds issue
Explicitly uses a 64-bit constant when the number of bits used for its
shifting is 32 (which is the case for PC CAN FD interfaces supported by
this driver).
[mkl: update subject, apply manually] |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: Take a reference on the task in struct vhost_task.
vhost_task_create() creates a task and keeps a reference to its
task_struct. That task may exit early via a signal and its task_struct
will be released.
A pending vhost_task_wake() will then attempt to wake the task and
access a task_struct which is no longer there.
Acquire a reference on the task_struct while creating the thread and
release the reference while the struct vhost_task itself is removed.
If the task exits early due to a signal, then the vhost_task_wake() will
still access a valid task_struct. The wake is safe and will be skipped
in this case. |
| A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation.
The nft_verdict_init() function allows positive values as drop error within the hook verdict, and hence the nf_hook_slow() function can cause a double free vulnerability when NF_DROP is issued with a drop error which resembles NF_ACCEPT.
We recommend upgrading past commit f342de4e2f33e0e39165d8639387aa6c19dff660. |
| IBM Aspera Faspex 4.4.2 Patch Level 1 and earlier could allow a remote attacker to execute arbitrary code on the system, caused by a YAML deserialization flaw. By sending a specially crafted obsolete API call, an attacker could exploit this vulnerability to execute arbitrary code on the system. The obsolete API call was removed in Faspex 4.4.2 PL2. IBM X-Force ID: 243512. |
| NVIDIA Display Driver for Windows and Linux contains a vulnerability in a video decoder, where an attacker might cause an out-of-bounds read. A successful exploit of this vulnerability might lead to information disclosure or denial of service. |
| NVIDIA Display Driver for Linux contains a vulnerability in a kernel module, where an attacker might be able to trigger a null pointer deference. A successful exploit of this vulnerability might lead to denial of service. |
| IBM Sterling B2B Integrator 6.2.0.0 through 6.2.0.5, and 6.2.1.0 and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5, and 6.2.1.0 stores user credentials in configuration files which can be read by a local user. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: use get_random_u32 instead of prandom
bh might occur while updating per-cpu rnd_state from user context,
ie. local_out path.
BUG: using smp_processor_id() in preemptible [00000000] code: nginx/2725
caller is nft_ng_random_eval+0x24/0x54 [nft_numgen]
Call Trace:
check_preemption_disabled+0xde/0xe0
nft_ng_random_eval+0x24/0x54 [nft_numgen]
Use the random driver instead, this also avoids need for local prandom
state. Moreover, prandom now uses the random driver since d4150779e60f
("random32: use real rng for non-deterministic randomness").
Based on earlier patch from Pablo Neira. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ftrace: consistently handle PLTs.
Sometimes it is necessary to use a PLT entry to call an ftrace
trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(),
with each having *almost* identical logic, but this is not handled by
ftrace_modify_call() since its introduction in commit:
3b23e4991fb66f6d ("arm64: implement ftrace with regs")
Due to this, if we ever were to call ftrace_modify_call() for a callsite
which requires a PLT entry for a trampoline, then either:
a) If the old addr requires a trampoline, ftrace_modify_call() will use
an out-of-range address to generate the 'old' branch instruction.
This will result in warnings from aarch64_insn_gen_branch_imm() and
ftrace_modify_code(), and no instructions will be modified. As
ftrace_modify_call() will return an error, this will result in
subsequent internal ftrace errors.
b) If the old addr does not require a trampoline, but the new addr does,
ftrace_modify_call() will use an out-of-range address to generate the
'new' branch instruction. This will result in warnings from
aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace
the 'old' branch with a BRK. This will result in a kernel panic when
this BRK is later executed.
Practically speaking, case (a) is vastly more likely than case (b), and
typically this will result in internal ftrace errors that don't
necessarily affect the rest of the system. This can be demonstrated with
an out-of-tree test module which triggers ftrace_modify_call(), e.g.
| # insmod test_ftrace.ko
| test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024
| branch_imm_common: offset out of range
| branch_imm_common: offset out of range
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace]
| actual: 1d:00:00:94
| Updating ftrace call site to call a different ftrace function
| ftrace record flags: e0000002
| (2) R
| expected tramp: ffffb374ae42ed54
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0
| Modules linked in: test_ftrace(+)
| CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13
| Hardware name: linux,dummy-virt (DT)
| pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x280/0x2b0
| lr : ftrace_bug+0x280/0x2b0
| sp : ffff80000839ba00
| x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0
| x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000
| x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8
| x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff
| x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4
| x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8
| x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167
| x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022
| Call trace:
| ftrace_bug+0x280/0x2b0
| ftrace_replace_code+0x98/0xa0
| ftrace_modify_all_code+0xe0/0x144
| arch_ftrace_update_code+0x14/0x20
| ftrace_startup+0xf8/0x1b0
| register_ftrace_function+0x38/0x90
| test_ftrace_init+0xd0/0x1000 [test_ftrace]
| do_one_initcall+0x50/0x2b0
| do_init_module+0x50/0x1f0
| load_module+0x17c8/0x1d64
| __do_sys_finit_module+0xa8/0x100
| __arm64_sys_finit_module+0x2c/0x3c
| invoke_syscall+0x50/0x120
| el0_svc_common.constprop.0+0xdc/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x34/0xb0
| el0t_64_sync_handler+0xbc/0x140
| el0t_64_sync+0x18c/0x190
| ---[ end trace 0000000000000000 ]---
We can solve this by consistently determining whether to use a PLT entry
for an address.
Note that since (the earlier) commit:
f1a54ae9
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix request_sock leak in sk lookup helpers
A customer reported a request_socket leak in a Calico cloud environment. We
found that a BPF program was doing a socket lookup with takes a refcnt on
the socket and that it was finding the request_socket but returning the parent
LISTEN socket via sk_to_full_sk() without decrementing the child request socket
1st, resulting in request_sock slab object leak. This patch retains the
existing behaviour of returning full socks to the caller but it also decrements
the child request_socket if one is present before doing so to prevent the leak.
Thanks to Curtis Taylor for all the help in diagnosing and testing this. And
thanks to Antoine Tenart for the reproducer and patch input.
v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to
validate RCU flags on the listen socket so that it balances with bpf_sk_release()
and update comments as per Martin KaFai Lau's suggestion. One small change to
Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra
instruction. |
| Information Spoofing in devLXD Server in Canonical LXD versions 4.0 and above on Linux container platforms allows attackers with root privileges within any container to impersonate other containers and obtain their metadata, configuration, and device information via spoofed process names in the command line. |
| Information disclosure in image export API in Canonical LXD before 6.5 and 5.21.4 on Linux allows network attackers to determine project existence without authentication via crafted requests using wildcard fingerprints. |
| Type confusion in V8 in Google Chrome prior to 138.0.7204.96 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in Intents in Google Chrome on Android prior to 104.0.5112.101 allowed a remote attacker to arbitrarily browse to a malicious website via a crafted HTML page. |
