| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix another deadlock during RTC update
If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count
is 0, we will enter the runtime suspend callback. However, the runtime
suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock.
Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use raw_spinlock_t in ringbuf
The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c
CPU: 7 PID: 556208 Comm: test_progs Tainted: G
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace+0xac/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0xac/0xe8
dump_stack+0x18/0x30
__might_resched+0x3bc/0x4fc
rt_spin_lock+0x8c/0x1a4
__bpf_ringbuf_reserve+0xc4/0x254
bpf_ringbuf_reserve_dynptr+0x5c/0xdc
bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238
trace_call_bpf+0x238/0x774
perf_call_bpf_enter.isra.0+0x104/0x194
perf_syscall_enter+0x2f8/0x510
trace_sys_enter+0x39c/0x564
syscall_trace_enter+0x220/0x3c0
do_el0_svc+0x138/0x1dc
el0_svc+0x54/0x130
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Switch the spinlock to raw_spinlock_t to avoid this error. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: check if we need to reschedule during overflow flush
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and
do so if necessary. There's no state to maintain here as overflows
always prune from head-of-list, hence it's fine to drop and reacquire
the locks at the end of the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73
but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: wd33c93: Don't use stale scsi_pointer value
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Move flush_work initialization out of if block
After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a
work queue"), it can happen that a work item is sent to an uninitialized
work queue. This may has the effect that the item being queued is never
actually queued, and any further actions depending on it will not
proceed.
The following warning is observed while the fnic driver is loaded:
kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410
kernel: <IRQ>
kernel: queue_work_on+0x3a/0x50
kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: __handle_irq_event_percpu+0x36/0x1a0
kernel: handle_irq_event_percpu+0x30/0x70
kernel: handle_irq_event+0x34/0x60
kernel: handle_edge_irq+0x7e/0x1a0
kernel: __common_interrupt+0x3b/0xb0
kernel: common_interrupt+0x58/0xa0
kernel: </IRQ>
It has been observed that this may break the rediscovery of Fibre
Channel devices after a temporary fabric failure.
This patch fixes it by moving the work queue initialization out of
an if block in fnic_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix i_data_sem unlock order in ext4_ind_migrate()
Fuzzing reports a possible deadlock in jbd2_log_wait_commit.
This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.
This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Rule: add |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853.
dev_queue_xmit_nit is expected to be called with BH disabled.
__dev_queue_xmit has the following:
/* Disable soft irqs for various locks below. Also
* stops preemption for RCU.
*/
rcu_read_lock_bh();
VRF must follow this invariant. The referenced commit removed this
protection. Which triggered a lockdep warning:
================================
WARNING: inconsistent lock state
6.11.0 #1 Tainted: G W
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x19a/0x4f0
_raw_spin_lock+0x27/0x40
packet_rcv+0xa33/0x1320
__netif_receive_skb_core.constprop.0+0xcb0/0x3a90
__netif_receive_skb_list_core+0x2c9/0x890
netif_receive_skb_list_internal+0x610/0xcc0
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(rlock-AF_PACKET);
<Interrupt>
lock(rlock-AF_PACKET);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x73/0xa0
mark_lock+0x102e/0x16b0
__lock_acquire+0x9ae/0x6170
lock_acquire+0x19a/0x4f0
_raw_spin_lock+0x27/0x40
tpacket_rcv+0x863/0x3b30
dev_queue_xmit_nit+0x709/0xa40
vrf_finish_direct+0x26e/0x340 [vrf]
vrf_l3_out+0x5f4/0xe80 [vrf]
__ip_local_out+0x51e/0x7a0
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/timerlat: Drop interface_lock in stop_kthread()
stop_kthread() is the offline callback for "trace/osnoise:online", since
commit 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing
of kthread in stop_kthread()"), the following ABBA deadlock scenario is
introduced:
T1 | T2 [BP] | T3 [AP]
osnoise_hotplug_workfn() | work_for_cpu_fn() | cpuhp_thread_fun()
| _cpu_down() | osnoise_cpu_die()
mutex_lock(&interface_lock) | | stop_kthread()
| cpus_write_lock() | mutex_lock(&interface_lock)
cpus_read_lock() | cpuhp_kick_ap() |
As the interface_lock here in just for protecting the "kthread" field of
the osn_var, use xchg() instead to fix this issue. Also use
for_each_online_cpu() back in stop_per_cpu_kthreads() as it can take
cpu_read_lock() again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc_submit: add missing locking in wedged_fini
Any non-wedged queue can have a zero refcount here and can be running
concurrently with an async queue destroy, therefore dereferencing the
queue ptr to check wedge status after the lookup can trigger UAF if
queue is not wedged. Fix this by keeping the submission_state lock held
around the check to postpone the free and make the check safe, before
dropping again around the put() to avoid the deadlock.
(cherry picked from commit d28af0b6b9580b9f90c265a7da0315b0ad20bbfd) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: avoid to add interface to list twice when SER
If SER L2 occurs during the WoWLAN resume flow, the add interface flow
is triggered by ieee80211_reconfig(). However, due to
rtw89_wow_resume() return failure, it will cause the add interface flow
to be executed again, resulting in a double add list and causing a kernel
panic. Therefore, we have added a check to prevent double adding of the
list.
list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:37!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:__list_add_valid_or_report+0x5e/0xb0
Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12
RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246
RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900
RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001
RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0
R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060
R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010
FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0
Call Trace:
<TASK>
? __die_body+0x1f/0x70
? die+0x3d/0x60
? do_trap+0xa4/0x110
? __list_add_valid_or_report+0x5e/0xb0
? do_error_trap+0x6d/0x90
? __list_add_valid_or_report+0x5e/0xb0
? handle_invalid_op+0x30/0x40
? __list_add_valid_or_report+0x5e/0xb0
? exc_invalid_op+0x3c/0x50
? asm_exc_invalid_op+0x16/0x20
? __list_add_valid_or_report+0x5e/0xb0
rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f]
drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
? finish_wait+0x3e/0x90
? synchronize_rcu_expedited+0x174/0x260
? sync_rcu_exp_done_unlocked+0x50/0x50
? wake_bit_function+0x40/0x40
ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
process_scheduled_works+0x1e5/0x480
worker_thread+0xea/0x1e0
kthread+0xdb/0x110
? move_linked_works+0x90/0x90
? kthread_associate_blkcg+0xa0/0xa0
ret_from_fork+0x3b/0x50
? kthread_associate_blkcg+0xa0/0xa0
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev
gsmi: Log Shutdown Reason 0x03
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
This may be a typo. The comment has said shared locks are
not allowed when this bit is set. If using shared lock, the
wait in `fuse_file_cached_io_open` may be forever. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock
Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock
on x86 due to a chain of locks and SRCU synchronizations. Translating the
below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on
CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the
fairness of r/w semaphores).
CPU0 CPU1 CPU2
1 lock(&kvm->slots_lock);
2 lock(&vcpu->mutex);
3 lock(&kvm->srcu);
4 lock(cpu_hotplug_lock);
5 lock(kvm_lock);
6 lock(&kvm->slots_lock);
7 lock(cpu_hotplug_lock);
8 sync(&kvm->srcu);
Note, there are likely more potential deadlocks in KVM x86, e.g. the same
pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with
__kvmclock_cpufreq_notifier():
cpuhp_cpufreq_online()
|
-> cpufreq_online()
|
-> cpufreq_gov_performance_limits()
|
-> __cpufreq_driver_target()
|
-> __target_index()
|
-> cpufreq_freq_transition_begin()
|
-> cpufreq_notify_transition()
|
-> ... __kvmclock_cpufreq_notifier()
But, actually triggering such deadlocks is beyond rare due to the
combination of dependencies and timings involved. E.g. the cpufreq
notifier is only used on older CPUs without a constant TSC, mucking with
the NX hugepage mitigation while VMs are running is very uncommon, and
doing so while also onlining/offlining a CPU (necessary to generate
contention on cpu_hotplug_lock) would be even more unusual.
The most robust solution to the general cpu_hotplug_lock issue is likely
to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq
notifier doesn't to take kvm_lock. For now, settle for fixing the most
blatant deadlock, as switching to an RCU-protected list is a much more
involved change, but add a comment in locking.rst to call out that care
needs to be taken when walking holding kvm_lock and walking vm_list.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O
------------------------------------------------------
tee/35048 is trying to acquire lock:
ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm]
but task is already holding lock:
ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (kvm_lock){+.+.}-{3:3}:
__mutex_lock+0x6a/0xb40
mutex_lock_nested+0x1f/0x30
kvm_dev_ioctl+0x4fb/0xe50 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x2e/0xb0
static_key_slow_inc+0x16/0x30
kvm_lapic_set_base+0x6a/0x1c0 [kvm]
kvm_set_apic_base+0x8f/0xe0 [kvm]
kvm_set_msr_common+0x9ae/0xf80 [kvm]
vmx_set_msr+0xa54/0xbe0 [kvm_intel]
__kvm_set_msr+0xb6/0x1a0 [kvm]
kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm]
kvm_vcpu_ioctl+0x485/0x5b0 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&kvm->srcu){.+.+}-{0:0}:
__synchronize_srcu+0x44/0x1a0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: handle overlapped pclusters out of crafted images properly
syzbot reported a task hang issue due to a deadlock case where it is
waiting for the folio lock of a cached folio that will be used for
cache I/Os.
After looking into the crafted fuzzed image, I found it's formed with
several overlapped big pclusters as below:
Ext: logical offset | length : physical offset | length
0: 0.. 16384 | 16384 : 151552.. 167936 | 16384
1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384
2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384
...
Here, extent 0/1 are physically overlapped although it's entirely
_impossible_ for normal filesystem images generated by mkfs.
First, managed folios containing compressed data will be marked as
up-to-date and then unlocked immediately (unlike in-place folios) when
compressed I/Os are complete. If physical blocks are not submitted in
the incremental order, there should be separate BIOs to avoid dependency
issues. However, the current code mis-arranges z_erofs_fill_bio_vec()
and BIO submission which causes unexpected BIO waits.
Second, managed folios will be connected to their own pclusters for
efficient inter-queries. However, this is somewhat hard to implement
easily if overlapped big pclusters exist. Again, these only appear in
fuzzed images so let's simply fall back to temporary short-lived pages
for correctness.
Additionally, it justifies that referenced managed folios cannot be
truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy
up `struct z_erofs_bvec`") for simplicity although it shouldn't be any
difference. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled
Fix missuse of spin_lock_irq()/spin_unlock_irq() when
spin_lock_irqsave()/spin_lock_irqrestore() was hold.
This was discovered through the lock debugging, and the corresponding
log is as follows:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40
...
Call trace:
warn_bogus_irq_restore+0x30/0x40
_raw_spin_unlock_irqrestore+0x84/0xc8
add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2]
hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2]
hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2]
create_qp+0x138/0x258
ib_create_qp_kernel+0x50/0xe8
create_mad_qp+0xa8/0x128
ib_mad_port_open+0x218/0x448
ib_mad_init_device+0x70/0x1f8
add_client_context+0xfc/0x220
enable_device_and_get+0xd0/0x140
ib_register_device.part.0+0xf4/0x1c8
ib_register_device+0x34/0x50
hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2]
hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2]
__hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2] |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
Floating point instructions in userspace can crash some arm kernels
built with clang/LLD 17.0.6:
BUG: unsupported FP instruction in kernel mode
FPEXC == 0xc0000780
Internal error: Oops - undefined instruction: 0 [#1] ARM
CPU: 0 PID: 196 Comm: vfp-reproducer Not tainted 6.10.0 #1
Hardware name: BCM2835
PC is at vfp_support_entry+0xc8/0x2cc
LR is at do_undefinstr+0xa8/0x250
pc : [<c0101d50>] lr : [<c010a80c>] psr: a0000013
sp : dc8d1f68 ip : 60000013 fp : bedea19c
r10: ec532b17 r9 : 00000010 r8 : 0044766c
r7 : c0000780 r6 : ec532b17 r5 : c1c13800 r4 : dc8d1fb0
r3 : c10072c4 r2 : c0101c88 r1 : ec532b17 r0 : 0044766c
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 0251c008 DAC: 00000051
Register r0 information: non-paged memory
Register r1 information: vmalloc memory
Register r2 information: non-slab/vmalloc memory
Register r3 information: non-slab/vmalloc memory
Register r4 information: 2-page vmalloc region
Register r5 information: slab kmalloc-cg-2k
Register r6 information: vmalloc memory
Register r7 information: non-slab/vmalloc memory
Register r8 information: non-paged memory
Register r9 information: zero-size pointer
Register r10 information: vmalloc memory
Register r11 information: non-paged memory
Register r12 information: non-paged memory
Process vfp-reproducer (pid: 196, stack limit = 0x61aaaf8b)
Stack: (0xdc8d1f68 to 0xdc8d2000)
1f60: 0000081f b6f69300 0000000f c10073f4 c10072c4 dc8d1fb0
1f80: ec532b17 0c532b17 0044766c b6f9ccd8 00000000 c010a80c 00447670 60000010
1fa0: ffffffff c1c13800 00c5387d c0100f10 b6f68af8 00448fc0 00000000 bedea188
1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c
1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff 00000000 00000000
Call trace:
[<c0101d50>] (vfp_support_entry) from [<c010a80c>] (do_undefinstr+0xa8/0x250)
[<c010a80c>] (do_undefinstr) from [<c0100f10>] (__und_usr+0x70/0x80)
Exception stack(0xdc8d1fb0 to 0xdc8d1ff8)
1fa0: b6f68af8 00448fc0 00000000 bedea188
1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c
1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff
Code: 0a000061 e3877202 e594003c e3a09010 (eef16a10)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
This is a minimal userspace reproducer on a Raspberry Pi Zero W:
#include <stdio.h>
#include <math.h>
int main(void)
{
double v = 1.0;
printf("%fn", NAN + *(volatile double *)&v);
return 0;
}
Another way to consistently trigger the oops is:
calvin@raspberry-pi-zero-w ~$ python -c "import json"
The bug reproduces only when the kernel is built with DYNAMIC_DEBUG=n,
because the pr_debug() calls act as barriers even when not activated.
This is the output from the same kernel source built with the same
compiler and DYNAMIC_DEBUG=y, where the userspace reproducer works as
expected:
VFP: bounce: trigger ec532b17 fpexc c0000780
VFP: emulate: INST=0xee377b06 SCR=0x00000000
VFP: bounce: trigger eef1fa10 fpexc c0000780
VFP: emulate: INST=0xeeb40b40 SCR=0x00000000
VFP: raising exceptions 30000000
calvin@raspberry-pi-zero-w ~$ ./vfp-reproducer
nan
Crudely grepping for vmsr/vmrs instructions in the otherwise nearly
idential text for vfp_support_entry() makes the problem obvious:
vmlinux.llvm.good [0xc0101cb8] <+48>: vmrs r7, fpexc
vmlinux.llvm.good [0xc0101cd8] <+80>: vmsr fpexc, r0
vmlinux.llvm.good [0xc0101d20
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
If the __qcuefi pointer is not set, then in the original code, we would
hold onto the lock. That means that if we tried to set it later, then
it would cause a deadlock. Drop the lock on the error path. That's
what all the callers are expecting. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/client: fix deadlock in show_meminfo()
There is a real deadlock as well as sleeping in atomic() bug in here, if
the bo put happens to be the last ref, since bo destruction wants to
grab the same spinlock and sleeping locks. Fix that by dropping the ref
using xe_bo_put_deferred(), and moving the final commit outside of the
lock. Dropping the lock around the put is tricky since the bo can go
out of scope and delete itself from the list, making it difficult to
navigate to the next list entry.
(cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a) |
