| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix the missing xa_store error check
xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot
be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed,
so check error for xa_store() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: vertexcom: mse102x: Fix possible double free of TX skb
The scope of the TX skb is wider than just mse102x_tx_frame_spi(),
so in case the TX skb room needs to be expanded, we should free the
the temporary skb instead of the original skb. Otherwise the original
TX skb pointer would be freed again in mse102x_tx_work(), which leads
to crashes:
Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP
CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23
Hardware name: chargebyte Charge SOM DC-ONE (DT)
Workqueue: events mse102x_tx_work [mse102x]
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_release_data+0xb8/0x1d8
lr : skb_release_data+0x1ac/0x1d8
sp : ffff8000819a3cc0
x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0
x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff
x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50
x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc
x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000
x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000
x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8
x8 : fffffc00001bc008
x7 : 0000000000000000 x6 : 0000000000000008
x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009
x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
skb_release_data+0xb8/0x1d8
kfree_skb_reason+0x48/0xb0
mse102x_tx_work+0x164/0x35c [mse102x]
process_one_work+0x138/0x260
worker_thread+0x32c/0x438
kthread+0x118/0x11c
ret_from_fork+0x10/0x20
Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660) |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
I got a syzbot report without a repro [1] crashing in nf_send_reset6()
I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.
Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.
[1]
skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
eth_header+0x38/0x1f0 net/ethernet/eth.c:83
dev_hard_header include/linux/netdevice.h:3208 [inline]
nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358
nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:277 [inline]
br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424
__netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562
__netif_receive_skb_one_core net/core/dev.c:5666 [inline]
__netif_receive_skb+0x12f/0x650 net/core/dev.c:5781
netif_receive_skb_internal net/core/dev.c:5867 [inline]
netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926
tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550
tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053
new_sync_write fs/read_write.c:590 [inline]
vfs_write+0xa6d/0xc90 fs/read_write.c:683
ksys_write+0x183/0x2b0 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdbeeb7d1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48
RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff
RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8
RBP: 00007fdbeebf12be R08: 0000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline]
hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline]
hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline]
hci_init_sync net/bluetooth/hci_sync.c:4742 [inline]
hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline]
hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994
hci_dev_do_open net/bluetooth/hci_core.c:483 [inline]
hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015
process_one_work kernel/workqueue.c:3267 [inline]
process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348
worker_thread+0x91f/0xe50 kernel/workqueue.c:3429
kthread+0x2cb/0x360 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
[2]
WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0
Modules linked in:
CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0
[...]
Call Trace:
<TASK>
mlxsw_sp_router_netdevice_event+0x55f/0x1240
notifier_call_chain+0x5a/0xd0
call_netdevice_notifiers_info+0x39/0x90
unregister_netdevice_many_notify+0x63e/0x9d0
rtnl_dellink+0x16b/0x3a0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x1de/0x420
____sys_sendmsg+0x2bd/0x320
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[3]
unreferenced object 0xffff898081f597a0 (size 32):
comm "ip", pid 1626, jiffies 4294719324
hex dump (first 32 bytes):
20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ...............
21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia.............
backtrace (crc fd9be911):
[<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260
[<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340
[<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240
[<00000000743e7757>] notifier_call_chain+0x5a/0xd0
[<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90
[<000000002509645d>] register_netdevice+0x5f7/0x7a0
[<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130
[<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120
[<000000004df7c7cc>] rtnl_newlink+0x471/0xa20
[<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0
[<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100
[<00000000908bca63>] netlink_unicast+0x242/0x390
[<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420
[<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320
[<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0
[<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
maple_tree: correct tree corruption on spanning store
Patch series "maple_tree: correct tree corruption on spanning store", v3.
There has been a nasty yet subtle maple tree corruption bug that appears
to have been in existence since the inception of the algorithm.
This bug seems far more likely to happen since commit f8d112a4e657
("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point
at which reports started to be submitted concerning this bug.
We were made definitely aware of the bug thanks to the kind efforts of
Bert Karwatzki who helped enormously in my being able to track this down
and identify the cause of it.
The bug arises when an attempt is made to perform a spanning store across
two leaf nodes, where the right leaf node is the rightmost child of the
shared parent, AND the store completely consumes the right-mode node.
This results in mas_wr_spanning_store() mitakenly duplicating the new and
existing entries at the maximum pivot within the range, and thus maple
tree corruption.
The fix patch corrects this by detecting this scenario and disallowing the
mistaken duplicate copy.
The fix patch commit message goes into great detail as to how this occurs.
This series also includes a test which reliably reproduces the issue, and
asserts that the fix works correctly.
Bert has kindly tested the fix and confirmed it resolved his issues. Also
Mikhail Gavrilov kindly reported what appears to be precisely the same
bug, which this fix should also resolve.
This patch (of 2):
There has been a subtle bug present in the maple tree implementation from
its inception.
This arises from how stores are performed - when a store occurs, it will
overwrite overlapping ranges and adjust the tree as necessary to
accommodate this.
A range may always ultimately span two leaf nodes. In this instance we
walk the two leaf nodes, determine which elements are not overwritten to
the left and to the right of the start and end of the ranges respectively
and then rebalance the tree to contain these entries and the newly
inserted one.
This kind of store is dubbed a 'spanning store' and is implemented by
mas_wr_spanning_store().
In order to reach this stage, mas_store_gfp() invokes
mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to
walk the tree and update the object (mas) to traverse to the location
where the write should be performed, determining its store type.
When a spanning store is required, this function returns false stopping at
the parent node which contains the target range, and mas_wr_store_type()
marks the mas->store_type as wr_spanning_store to denote this fact.
When we go to perform the store in mas_wr_spanning_store(), we first
determine the elements AFTER the END of the range we wish to store (that
is, to the right of the entry to be inserted) - we do this by walking to
the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we
have just determined contains the range over which we intend to write.
We then turn our attention to the entries to the left of the entry we are
inserting, whose state is represented by l_mas, and copy these into a 'big
node', which is a special node which contains enough slots to contain two
leaf node's worth of data.
We then copy the entry we wish to store immediately after this - the copy
and the insertion of the new entry is performed by mas_store_b_node().
After this we copy the elements to the right of the end of the range which
we are inserting, if we have not exceeded the length of the node (i.e.
r_mas.offset <= r_mas.end).
Herein lies the bug - under very specific circumstances, this logic can
break and corrupt the maple tree.
Consider the following tree:
Height
0 Root Node
/ \
pivot = 0xffff / \ pivot = ULONG_MAX
/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: dp83869: fix memory corruption when enabling fiber
When configuring the fiber port, the DP83869 PHY driver incorrectly
calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit
number (10). This corrupts some other memory location -- in case of
arm64 the priv pointer in the same structure.
Since the advertising flags are updated from supported at the end of the
function the incorrect line isn't needed at all and can be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error
In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail()
to recover some journal space. But if an error occurs while executing
jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free
space right away, we try other branches, and if j_committing_transaction
is NULL (i.e., the tid is 0), we will get the following complain:
============================================
JBD2: I/O error when updating journal superblock for sdd-8.
__jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available
__jbd2_log_wait_for_space: no way to get more journal space in sdd-8
------------[ cut here ]------------
WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0
Modules linked in:
CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1
RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0
Call Trace:
<TASK>
add_transaction_credits+0x5d1/0x5e0
start_this_handle+0x1ef/0x6a0
jbd2__journal_start+0x18b/0x340
ext4_dirty_inode+0x5d/0xb0
__mark_inode_dirty+0xe4/0x5d0
generic_update_time+0x60/0x70
[...]
============================================
So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to
clean up at the moment, continue to try to reclaim free space in other ways.
Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt
when updating journal superblock fails") to make jbd2_cleanup_journal_tail
return the correct error code. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix double brelse() the buffer of the extents path
In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been
released, otherwise it may be released twice. An example of what triggers
this is as follows:
split2 map split1
|--------|-------|--------|
ext4_ext_map_blocks
ext4_ext_handle_unwritten_extents
ext4_split_convert_extents
// path->p_depth == 0
ext4_split_extent
// 1. do split1
ext4_split_extent_at
|ext4_ext_insert_extent
| ext4_ext_create_new_leaf
| ext4_ext_grow_indepth
| le16_add_cpu(&neh->eh_depth, 1)
| ext4_find_extent
| // return -ENOMEM
|// get error and try zeroout
|path = ext4_find_extent
| path->p_depth = 1
|ext4_ext_try_to_merge
| ext4_ext_try_to_merge_up
| path->p_depth = 0
| brelse(path[1].p_bh) ---> not set to NULL here
|// zeroout success
// 2. update path
ext4_find_extent
// 3. do split2
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
le16_add_cpu(&neh->eh_depth, 1)
ext4_find_extent
path[0].p_bh = NULL;
path->p_depth = 1
read_extent_tree_block ---> return err
// path[1].p_bh is still the old value
ext4_free_ext_path
ext4_ext_drop_refs
// path->p_depth == 1
brelse(path[1].p_bh) ---> brelse a buffer twice
Finally got the following WARRNING when removing the buffer from lru:
============================================
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90
CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716
RIP: 0010:__brelse+0x58/0x90
Call Trace:
<TASK>
__find_get_block+0x6e7/0x810
bdev_getblk+0x2b/0x480
__ext4_get_inode_loc+0x48a/0x1240
ext4_get_inode_loc+0xb2/0x150
ext4_reserve_inode_write+0xb7/0x230
__ext4_mark_inode_dirty+0x144/0x6a0
ext4_ext_insert_extent+0x9c8/0x3230
ext4_ext_map_blocks+0xf45/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
============================================ |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Block path traversal
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/tdx: Fix "in-kernel MMIO" check
TDX only supports kernel-initiated MMIO operations. The handle_mmio()
function checks if the #VE exception occurred in the kernel and rejects
the operation if it did not.
However, userspace can deceive the kernel into performing MMIO on its
behalf. For example, if userspace can point a syscall to an MMIO address,
syscall does get_user() or put_user() on it, triggering MMIO #VE. The
kernel will treat the #VE as in-kernel MMIO.
Ensure that the target MMIO address is within the kernel before decoding
instruction. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_socket: fix sk refcount leaks
We must put 'sk' reference before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF caused by offsets overwrite
Binder objects are processed and copied individually into the target
buffer during transactions. Any raw data in-between these objects is
copied as well. However, this raw data copy lacks an out-of-bounds
check. If the raw data exceeds the data section size then the copy
overwrites the offsets section. This eventually triggers an error that
attempts to unwind the processed objects. However, at this point the
offsets used to index these objects are now corrupted.
Unwinding with corrupted offsets can result in decrements of arbitrary
nodes and lead to their premature release. Other users of such nodes are
left with a dangling pointer triggering a use-after-free. This issue is
made evident by the following KASAN report (trimmed):
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff47fc91598f04 by task binder-util/743
CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_free_buf+0x128/0x434
binder_thread_write+0x8a4/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Allocated by task 743:
__kmalloc_cache_noprof+0x110/0x270
binder_new_node+0x50/0x700
binder_transaction+0x413c/0x6da8
binder_thread_write+0x978/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Freed by task 745:
kfree+0xbc/0x208
binder_thread_read+0x1c5c/0x37d4
binder_ioctl+0x16d8/0x258c
[...]
==================================================================
To avoid this issue, let's check that the raw data copy is within the
boundaries of the data section. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: fix ID 0 endp usage after multiple re-creations
'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".
It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
The __vmap_pages_range_noflush() assumes its argument pages** contains
pages with the same page shift. However, since commit e9c3cda4d86e ("mm,
vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes
__GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation
failed for high order, the pages** may contain two different page shifts
(high order and order-0). This could lead __vmap_pages_range_noflush() to
perform incorrect mappings, potentially resulting in memory corruption.
Users might encounter this as follows (vmap_allow_huge = true, 2M is for
PMD_SIZE):
kvmalloc(2M, __GFP_NOFAIL|GFP_X)
__vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP)
vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0
vmap_pages_range()
vmap_pages_range_noflush()
__vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens
We can remove the fallback code because if a high-order allocation fails,
__vmalloc_node_range_noprof() will retry with order-0. Therefore, it is
unnecessary to fallback to order-0 here. Therefore, fix this by removing
the fallback code. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg_write_event_control(): fix a user-triggerable oops
we are *not* guaranteed that anything past the terminating NUL
is mapped (let alone initialized with anything sane). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only mark 'subflow' endp as available
Adding the following warning ...
WARN_ON_ONCE(msk->pm.local_addr_used == 0)
... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.
Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.
Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only decrement add_addr_accepted for MPJ req
Adding the following warning ...
WARN_ON_ONCE(msk->pm.add_addr_accepted == 0)
... before decrementing the add_addr_accepted counter helped to find a
bug when running the "remove single subflow" subtest from the
mptcp_join.sh selftest.
Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the
subflow closure. Before this patch, and upon the reception of the
RM_ADDR, the other peer will then try to decrement this
add_addr_accepted. That's not correct because the attached subflows have
not been created upon the reception of an ADD_ADDR.
A way to solve that is to decrement the counter only if the attached
subflow was an MP_JOIN to a remote id that was not 0, and initiated by
the host receiving the RM_ADDR. |
