| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Web server password authentication mechanism used by the products is vulnerable to a MitM and Replay attack. Successful exploitation of this vulnerability will allow unauthorized access of the product’s Web server to view and alter product configuration and diagnostics information.
Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400 |
| The device does not properly authenticate users and the potential exists for a remote user to upload a new firmware image to the Ethernet card, whether it is a corrupt or legitimate firmware image. Successful exploitation of this vulnerability could cause loss of availability, integrity, and confidentiality and a disruption in communications with other connected devices.
Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400 |
| An unauthorized access vulnerability exists in the Xiaomi Mi Connect Service APP. The vulnerability is caused by the validation logic is flawed and can be exploited by attackers to Unauthorized access to the victim’s device. |
| A vulnerability classified as problematic has been found in 70mai 1S up to 20250611. This affects an unknown part of the component Video Services. The manipulation leads to improper authentication. Access to the local network is required for this attack to succeed. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Hikka is a Telegram userbot. A vulnerability affects all users of versions below 1.6.2, including most of the forks. It allows an unauthenticated attacker to gain access to Telegram account of a victim, as well as full access to the server. The issue is patched in version 1.6.2. No known workarounds are available. |
| Netwrix Directory Manager (formerly Imanami GroupID) v.11.0.0.0 and before, as well as after v.11.1.25134.03 lacks Authentication for a Critical Function. |
| A security vulnerability was discovered in Moodle that allows some users to access sensitive information about other students before they finish verifying their identities using two-factor authentication (2FA). |
| A security vulnerability was discovered in Moodle that allows students to enroll themselves in courses without completing all the necessary safety checks. Specifically, users can sign up for courses prematurely, even if they haven't finished two-step verification processes. |
| pgjdbc is an open source postgresql JDBC Driver. From 42.7.4 and until 42.7.7, when the PostgreSQL JDBC driver is configured with channel binding set to required (default value is prefer), the driver would incorrectly allow connections to proceed with authentication methods that do not support channel binding (such as password, MD5, GSS, or SSPI authentication). This could allow a man-in-the-middle attacker to intercept connections that users believed were protected by channel binding requirements. This vulnerability is fixed in 42.7.7. |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| passport-wsfed-saml2 provides passport strategy for both WS-fed and SAML2 protocol. A vulnerability present starting in version 3.0.5 up to and including version 4.6.3 allows an attacker to impersonate any user during SAML authentication by crafting a SAMLResponse. This can be done by using a valid SAML object that was signed by the configured IdP. Users are affected specifically when the service provider is using passport-wsfed-saml2 and a valid SAML document signed by the Identity Provider can be obtained. Version 4.6.4 contains a fix for the vulnerability. |
| passport-wsfed-saml2 provides passport strategy for both WS-fed and SAML2 protocol. A vulnerability present starting in version 3.0.5 up to and including version 4.6.3 allows an attacker to impersonate any user during SAML authentication by tampering with a valid SAML response. This can be done by adding attributes to the response. Users are affected specifically when the service provider is using `passport-wsfed-saml2` and a valid SAML Response signed by the Identity Provider can be obtained. Version 4.6.4 contains a fix for the vulnerability. |
| A vulnerability in the HPE Performance Cluster Manager (HPCM) GUI could allow an attacker to bypass authentication. |
| HPE OneView may allow clusterService Authentication Bypass resulting in denial of service. |
| An authentication issue was addressed with improved state management. This issue is fixed in macOS Ventura 13.6.4. A local attacker may be able to view the previous logged in user’s desktop from the fast user switching screen. |
| Hozard alarm system (Alarmsysteem) v1.0 is vulnerable to Improper Authentication. Commands sent via the SMS functionality are accepted from random phone numbers, which allows an attacker to bring the alarm system to a disarmed state from any given phone number. |
| Permission vulnerability in the mobile application (com.afmobi.boomplayer) may lead to the risk of unauthorized operation. |
| The JobSearch WP Job Board plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.9.2. This is due to improper configurations in the 'jobsearch_xing_response_data_callback', 'set_access_tokes', and 'google_callback' functions. This makes it possible for unauthenticated attackers to log in as the first connected Xing user, or any connected Xing user if the Xing id is known. It is also possible for unauthenticated attackers to log in as the first connected Google user if the user has logged in, without subsequently logging out, in thirty days. The vulnerability was partially patched in version 2.8.4. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux,smack: don't bypass permissions check in inode_setsecctx hook
Marek Gresko reports that the root user on an NFS client is able to
change the security labels on files on an NFS filesystem that is
exported with root squashing enabled.
The end of the kerneldoc comment for __vfs_setxattr_noperm() states:
* This function requires the caller to lock the inode's i_mutex before it
* is executed. It also assumes that the caller will make the appropriate
* permission checks.
nfsd_setattr() does do permissions checking via fh_verify() and
nfsd_permission(), but those don't do all the same permissions checks
that are done by security_inode_setxattr() and its related LSM hooks do.
Since nfsd_setattr() is the only consumer of security_inode_setsecctx(),
simplest solution appears to be to replace the call to
__vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This
fixes the above issue and has the added benefit of causing nfsd to
recall conflicting delegations on a file when a client tries to change
its security label. |
| OctoPrint is a web interface for 3D printer.s OctoPrint versions up until and including 1.9.3 contain a vulnerability that allows malicious admins to change the password of other admin accounts, including their own, without having to repeat their password. An attacker who managed to hijack an admin account might use this to lock out actual admins from their OctoPrint instance. The vulnerability will be patched in version 1.10.0. |
