Export limit exceeded: 333730 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16475 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38537 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: Don't register LEDs for genphy If a PHY has no driver, the genphy driver is probed/removed directly in phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the LEDs will be (un)registered when probing/removing the genphy driver. This could occur if the leds are for a non-generic driver that isn't loaded for whatever reason. Synchronously removing the PHY device in phy_detach leads to the following deadlock: rtnl_lock() ndo_close() ... phy_detach() phy_remove() phy_leds_unregister() led_classdev_unregister() led_trigger_set() netdev_trigger_deactivate() unregister_netdevice_notifier() rtnl_lock() There is a corresponding deadlock on the open/register side of things (and that one is reported by lockdep), but it requires a race while this one is deterministic. Generic PHYs do not support LEDs anyway, so don't bother registering them. | ||||
| CVE-2022-50133 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci_plat_remove: avoid NULL dereference Since commit 4736ebd7fcaff1eb8481c140ba494962847d6e0a ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") xhci->shared_hcd can be NULL, which causes the following Oops on reboot: [ 710.124450] systemd-shutdown[1]: Rebooting. [ 710.298861] xhci-hcd xhci-hcd.2.auto: remove, state 4 [ 710.304217] usb usb3: USB disconnect, device number 1 [ 710.317441] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered [ 710.323280] xhci-hcd xhci-hcd.2.auto: remove, state 1 [ 710.328401] usb usb2: USB disconnect, device number 1 [ 710.333515] usb 2-3: USB disconnect, device number 2 [ 710.467649] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered [ 710.475450] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003b8 [ 710.484425] Mem abort info: [ 710.487265] ESR = 0x0000000096000004 [ 710.491060] EC = 0x25: DABT (current EL), IL = 32 bits [ 710.496427] SET = 0, FnV = 0 [ 710.499525] EA = 0, S1PTW = 0 [ 710.502716] FSC = 0x04: level 0 translation fault [ 710.507648] Data abort info: [ 710.510577] ISV = 0, ISS = 0x00000004 [ 710.514462] CM = 0, WnR = 0 [ 710.517480] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b0050000 [ 710.523976] [00000000000003b8] pgd=0000000000000000, p4d=0000000000000000 [ 710.530961] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 710.536551] Modules linked in: rfkill input_leds snd_soc_simple_card snd_soc_simple_card_utils snd_soc_nau8822 designware_i2s snd_soc_core dw_hdmi_ahb_audio snd_pcm_dmaengine arm_ccn panfrost ac97_bus gpu_sched snd_pcm at24 fuse configfs sdhci_of_dwcmshc sdhci_pltfm sdhci nvme led_class mmc_core nvme_core bt1_pvt polynomial tp_serio snd_seq_midi snd_seq_midi_event snd_seq snd_timer snd_rawmidi snd_seq_device snd soundcore efivarfs ipv6 [ 710.575286] CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 5.19.0-rc7-00043-gfd8619f4fd54 #1 [ 710.583822] Hardware name: T-Platforms TF307-MB/BM1BM1-A, BIOS 5.6 07/06/2022 [ 710.590972] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 710.597949] pc : usb_remove_hcd+0x34/0x1e4 [ 710.602067] lr : xhci_plat_remove+0x74/0x140 [ 710.606351] sp : ffff800009f3b7c0 [ 710.609674] x29: ffff800009f3b7c0 x28: ffff000800960040 x27: 0000000000000000 [ 710.616833] x26: ffff800008dc22a0 x25: 0000000000000000 x24: 0000000000000000 [ 710.623992] x23: 0000000000000000 x22: ffff000805465810 x21: ffff000805465800 [ 710.631149] x20: ffff000800f80000 x19: 0000000000000000 x18: ffffffffffffffff [ 710.638307] x17: ffff000805096000 x16: ffff00080633b800 x15: ffff000806537a1c [ 710.645465] x14: 0000000000000001 x13: 0000000000000000 x12: ffff00080378d6f0 [ 710.652621] x11: ffff00080041a900 x10: ffff800009b204e8 x9 : ffff8000088abaa4 [ 710.659779] x8 : ffff000800960040 x7 : ffff800009409000 x6 : 0000000000000001 [ 710.666936] x5 : ffff800009241000 x4 : ffff800009241440 x3 : 0000000000000000 [ 710.674094] x2 : ffff000800960040 x1 : ffff000800960040 x0 : 0000000000000000 [ 710.681251] Call trace: [ 710.683704] usb_remove_hcd+0x34/0x1e4 [ 710.687467] xhci_plat_remove+0x74/0x140 [ 710.691400] platform_remove+0x34/0x70 [ 710.695165] device_remove+0x54/0x90 [ 710.698753] device_release_driver_internal+0x200/0x270 [ 710.703992] device_release_driver+0x24/0x30 [ 710.708273] bus_remove_device+0xe0/0x16c [ 710.712293] device_del+0x178/0x390 [ 710.715797] platform_device_del.part.0+0x24/0x90 [ 710.720514] platform_device_unregister+0x30/0x50 [ 710.725232] dwc3_host_exit+0x20/0x30 [ 710.728907] dwc3_remove+0x174/0x1b0 [ 710.732494] platform_remove+0x34/0x70 [ 710.736254] device_remove+0x54/0x90 [ 710.739840] device_release_driver_internal+0x200/0x270 [ 710.745078] device_release_driver+0x24/0x30 [ 710.749359] bus_remove_device+0xe0/0x16c [ 710.753380] device_del+0x178/0x390 [ 710.756881] platform_device_del.part ---truncated--- | ||||
| CVE-2022-50134 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: fix potential memory leak in setup_base_ctxt() setup_base_ctxt() allocates a memory chunk for uctxt->groups with hfi1_alloc_ctxt_rcv_groups(). When init_user_ctxt() fails, uctxt->groups is not released, which will lead to a memory leak. We should release the uctxt->groups with hfi1_free_ctxt_rcv_groups() when init_user_ctxt() fails. | ||||
| CVE-2022-50135 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup The function rxe_create_qp calls rxe_qp_from_init. If some error occurs, the error handler of function rxe_qp_from_init will set both scq and rcq to NULL. Then rxe_create_qp calls rxe_put to handle qp. In the end, rxe_qp_do_cleanup is called by rxe_put. rxe_qp_do_cleanup directly accesses scq and rcq before checking them. This will cause null-ptr-deref error. The call graph is as below: rxe_create_qp { ... rxe_qp_from_init { ... err1: ... qp->rcq = NULL; <---rcq is set to NULL qp->scq = NULL; <---scq is set to NULL ... } qp_init: rxe_put{ ... rxe_qp_do_cleanup { ... atomic_dec(&qp->scq->num_wq); <--- scq is accessed ... atomic_dec(&qp->rcq->num_wq); <--- rcq is accessed } } | ||||
| CVE-2022-50136 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY in this case. This may trigger a call trace in iw_cm. A simple way to trigger this: server: ib_send_lat client: ib_send_lat -R <server_ip> The call trace looks like this: kernel BUG at drivers/infiniband/core/iwcm.c:894! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <...> Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: <TASK> cm_work_handler+0x1dd/0x370 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x49/0x2e0 ? rescuer_thread+0x370/0x370 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> | ||||
| CVE-2022-50137 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a window for use-after-free During a destroy CQ an interrupt may cause processing of a CQE after CQ resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is called under the cq_lock. | ||||
| CVE-2025-38554 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped By inducing delays in the right places, Jann Horn created a reproducer for a hard to hit UAF issue that became possible after VMAs were allowed to be recycled by adding SLAB_TYPESAFE_BY_RCU to their cache. Race description is borrowed from Jann's discovery report: lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under rcu_read_lock(). At that point, the VMA may be concurrently freed, and it can be recycled by another process. vma_start_read() then increments the vma->vm_refcnt (if it is in an acceptable range), and if this succeeds, vma_start_read() can return a recycled VMA. In this scenario where the VMA has been recycled, lock_vma_under_rcu() will then detect the mismatching ->vm_mm pointer and drop the VMA through vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm. This is wrong: It implicitly assumes that the caller is keeping the VMA's mm alive, but in this scenario the caller has no relation to the VMA's mm, so the rcuwait_wake_up() can cause UAF. The diagram depicting the race: T1 T2 T3 == == == lock_vma_under_rcu mas_walk <VMA gets removed from mm> mmap <the same VMA is reallocated> vma_start_read __refcount_inc_not_zero_limited_acquire munmap __vma_enter_locked refcount_add_not_zero vma_end_read vma_refcount_put __refcount_dec_and_test rcuwait_wait_event <finish operation> rcuwait_wake_up [UAF] Note that rcuwait_wait_event() in T3 does not block because refcount was already dropped by T1. At this point T3 can exit and free the mm causing UAF in T1. To avoid this we move vma->vm_mm verification into vma_start_read() and grab vma->vm_mm to stabilize it before vma_refcount_put() operation. [surenb@google.com: v3] | ||||
| CVE-2023-4515 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate command request size In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except for SMB2_OPLOCK_BREAK_HE command, the request size of other commands is not checked, it's not expected. Fix it by add check for request size of other commands. | ||||
| CVE-2018-5002 | 6 Adobe, Apple, Google and 3 more | 12 Flash Player, Flash Player Desktop Runtime, Mac Os X and 9 more | 2025-11-18 | 7.8 High |
| Adobe Flash Player versions 29.0.0.171 and earlier have a Stack-based buffer overflow vulnerability. Successful exploitation could lead to arbitrary code execution in the context of the current user. | ||||
| CVE-2025-38210 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: configfs-tsm-report: Fix NULL dereference of tsm_ops Unlike sysfs, the lifetime of configfs objects is controlled by userspace. There is no mechanism for the kernel to find and delete all created config-items. Instead, the configfs-tsm-report mechanism has an expectation that tsm_unregister() can happen at any time and cause established config-item access to start failing. That expectation is not fully satisfied. While tsm_report_read(), tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail if tsm_ops have been unregistered, tsm_report_privlevel_store() tsm_report_provider_show() fail to check for ops registration. Add the missing checks for tsm_ops having been removed. Now, in supporting the ability for tsm_unregister() to always succeed, it leaves the problem of what to do with lingering config-items. The expectation is that the admin that arranges for the ->remove() (unbind) of the ${tsm_arch}-guest driver is also responsible for deletion of all open config-items. Until that deletion happens, ->probe() (reload / bind) of the ${tsm_arch}-guest driver fails. This allows for emergency shutdown / revocation of attestation interfaces, and requires coordinated restart. | ||||
| CVE-2025-38217 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ftsteutates) Fix TOCTOU race in fts_read() In the fts_read() function, when handling hwmon_pwm_auto_channels_temp, the code accesses the shared variable data->fan_source[channel] twice without holding any locks. It is first checked against FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again when used as an argument to the BIT() macro. This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition. Another thread executing fts_update_device() can modify the value of data->fan_source[channel] between the check and its use. If the value is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the BIT() macro will be called with a large shift value (BIT(255)). A bit shift by a value greater than or equal to the type width is undefined behavior and can lead to a crash or incorrect values being returned to userspace. Fix this by reading data->fan_source[channel] into a local variable once, eliminating the race condition. Additionally, add a bounds check to ensure the value is less than BITS_PER_LONG before passing it to the BIT() macro, making the code more robust against undefined behavior. This possible bug was found by an experimental static analysis tool developed by our team. | ||||
| CVE-2025-38220 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: only dirty folios when data journaling regular files fstest generic/388 occasionally reproduces a crash that looks as follows: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ext4_block_zero_page_range+0x30c/0x380 [ext4] ext4_truncate+0x436/0x440 [ext4] ext4_process_orphan+0x5d/0x110 [ext4] ext4_orphan_cleanup+0x124/0x4f0 [ext4] ext4_fill_super+0x262d/0x3110 [ext4] get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x26/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4ed/0x6b0 do_syscall_64+0x82/0x170 ... This occurs when processing a symlink inode from the orphan list. The partial block zeroing code in the truncate path calls ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an a_ops vector in ext4, hence the crash. To avoid this problem, update the ext4_dirty_journalled_data() helper to only mark the folio dirty on regular files (for which a_ops is assigned). This also matches the journaling logic in the ext4_symlink() creation path, where ext4_handle_dirty_metadata() is called directly. | ||||
| CVE-2025-37895 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix error handling path in bnxt_init_chip() WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized. WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230 The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work. | ||||
| CVE-2025-38307 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Verify content returned by parse_int_array() The first element of the returned array stores its length. If it is 0, any manipulation beyond the element at index 0 ends with null-ptr-deref. | ||||
| CVE-2025-38325 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: add free_transport ops in ksmbd connection free_transport function for tcp connection can be called from smbdirect. It will cause kernel oops. This patch add free_transport ops in ksmbd connection, and add each free_transports for tcp and smbdirect. | ||||
| CVE-2025-38333 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to bail out in get_new_segment() ------------[ cut here ]------------ WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc pc : new_curseg+0x5e8/0x6dc Call trace: new_curseg+0x5e8/0x6dc f2fs_allocate_data_block+0xa54/0xe28 do_write_page+0x6c/0x194 f2fs_do_write_node_page+0x38/0x78 __write_node_page+0x248/0x6d4 f2fs_sync_node_pages+0x524/0x72c f2fs_write_checkpoint+0x4bc/0x9b0 __checkpoint_and_complete_reqs+0x80/0x244 issue_checkpoint_thread+0x8c/0xec kthread+0x114/0x1bc ret_from_fork+0x10/0x20 get_new_segment() detects inconsistent status in between free_segmap and free_secmap, let's record such error into super block, and bail out get_new_segment() instead of continue using the segment. | ||||
| CVE-2025-38338 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/nfs/read: fix double-unlock bug in nfs_return_empty_folio() Sometimes, when a file was read while it was being truncated by another NFS client, the kernel could deadlock because folio_unlock() was called twice, and the second call would XOR back the `PG_locked` flag. Most of the time (depending on the timing of the truncation), nobody notices the problem because folio_unlock() gets called three times, which flips `PG_locked` back off: 1. vfs_read, nfs_read_folio, ... nfs_read_add_folio, nfs_return_empty_folio 2. vfs_read, nfs_read_folio, ... netfs_read_collection, netfs_unlock_abandoned_read_pages 3. vfs_read, ... nfs_do_read_folio, nfs_read_add_folio, nfs_return_empty_folio The problem is that nfs_read_add_folio() is not supposed to unlock the folio if fscache is enabled, and a nfs_netfs_folio_unlock() check is missing in nfs_return_empty_folio(). Rarely this leads to a warning in netfs_read_collection(): ------------[ cut here ]------------ R=0000031c: folio 10 is not locked WARNING: CPU: 0 PID: 29 at fs/netfs/read_collect.c:133 netfs_read_collection+0x7c0/0xf00 [...] Workqueue: events_unbound netfs_read_collection_worker RIP: 0010:netfs_read_collection+0x7c0/0xf00 [...] Call Trace: <TASK> netfs_read_collection_worker+0x67/0x80 process_one_work+0x12e/0x2c0 worker_thread+0x295/0x3a0 Most of the time, however, processes just get stuck forever in folio_wait_bit_common(), waiting for `PG_locked` to disappear, which never happens because nobody is really holding the folio lock. | ||||
| CVE-2025-38339 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: fix JIT code size calculation of bpf trampoline arch_bpf_trampoline_size() provides JIT size of the BPF trampoline before the buffer for JIT'ing it is allocated. The total number of instructions emitted for BPF trampoline JIT code depends on where the final image is located. So, the size arrived at with the dummy pass in arch_bpf_trampoline_size() can vary from the actual size needed in arch_prepare_bpf_trampoline(). When the instructions accounted in arch_bpf_trampoline_size() is less than the number of instructions emitted during the actual JIT compile of the trampoline, the below warning is produced: WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc which is: /* Make sure the trampoline generation logic doesn't overflow */ if (image && WARN_ON_ONCE(&image[ctx->idx] > (u32 *)rw_image_end - BPF_INSN_SAFETY)) { So, during the dummy pass, instead of providing some arbitrary image location, account for maximum possible instructions if and when there is a dependency with image location for JIT'ing. | ||||
| CVE-2025-38343 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: drop fragments with multicast or broadcast RA IEEE 802.11 fragmentation can only be applied to unicast frames. Therefore, drop fragments with multicast or broadcast RA. This patch addresses vulnerabilities such as CVE-2020-26145. | ||||
| CVE-2025-38349 | 1 Linux | 1 Linux Kernel | 2025-11-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventpoll: don't decrement ep refcount while still holding the ep mutex Jann Horn points out that epoll is decrementing the ep refcount and then doing a mutex_unlock(&ep->mtx); afterwards. That's very wrong, because it can lead to a use-after-free. That pattern is actually fine for the very last reference, because the code in question will delay the actual call to "ep_free(ep)" until after it has unlocked the mutex. But it's wrong for the much subtler "next to last" case when somebody *else* may also be dropping their reference and free the ep while we're still using the mutex. Note that this is true even if that other user is also using the same ep mutex: mutexes, unlike spinlocks, can not be used for object ownership, even if they guarantee mutual exclusion. A mutex "unlock" operation is not atomic, and as one user is still accessing the mutex as part of unlocking it, another user can come in and get the now released mutex and free the data structure while the first user is still cleaning up. See our mutex documentation in Documentation/locking/mutex-design.rst, in particular the section [1] about semantics: "mutex_unlock() may access the mutex structure even after it has internally released the lock already - so it's not safe for another context to acquire the mutex and assume that the mutex_unlock() context is not using the structure anymore" So if we drop our ep ref before the mutex unlock, but we weren't the last one, we may then unlock the mutex, another user comes in, drops _their_ reference and releases the 'ep' as it now has no users - all while the mutex_unlock() is still accessing it. Fix this by simply moving the ep refcount dropping to outside the mutex: the refcount itself is atomic, and doesn't need mutex protection (that's the whole _point_ of refcounts: unlike mutexes, they are inherently about object lifetimes). | ||||